xps extruded polystyrene tile backer board for Shower Room CNBM Group
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Insulation & waterproofing solutions - CMAX board
Product name:
CMAX board (as known as construction board, tile backer board, insulation backer board, waterproof backer board, wet room backer board, XPS board.)
Product structure:
CMAX boards are made of high-performance waterproof extruded polystyrene (XPS Board), it has a 0.75mm coating on either side comprising a glassfiber mesh embedded in a polymer cement mortar.
Outstanding characteristics:
Both insulation and waterproof.
Product appearance:
The boards have straight edges. The color of the surface is grey and the core material is light blue.
Working temperature range:
50 to +80 °C
Standard dimensions and weight:
Thickness(mm) | Weight(kg/m²) | Length by width(mm*mm) |
6 | 2,7 | 1200 x 600 |
10 | 2,9 | 1250 x 600 |
12 | 3,0 | 2500 x 600 |
20 | 3.1 | 2500 x 600 |
30 | 3,3 | 2500 x 600 |
50 | 4,2 | 2500 x 600 |
The board has the following tolerances:thickness:± 2mm width:± 2mm length:± 3mm.
Reaction to Fire:
The boards are classified as class E according to EN 13501-1. When the boards are covered with tiles, their fire performance should comply with local construction laws and regulations.
Effect on indoor environment:
CMAX board has been assessed as not emitting any particles, gases or radiation that may have a negative effect on the indoor climate or to have any significant effect on health.
Environmental declaration:
The product does not contain any substances on the observation list of dangerous substances published by the national environmental authorities.
Main applications:
Used as a watertight layer on walls and floors in houses, hotels and other wet areas such as bathroom, shower room.
Other applications:
Other places to be insulated and waterproofed.
Applications:
1. as a watertight layer on walls and floors in wet rooms and bathrooms.
2. as an insulation layer in under floor heating to avoid heat loss.
3. as partition walls in wood or steel frames.
4. substitute for gypsum board and fiber cement board; insulation and waterproofing; lighter so that more easily to install.
5. As enclosures for bathtubs, water pipes, etc.
6,Can very easily and fast formed to be small shelves, washbasins, shower benches and soap boxes.
7. Combining with CMAX curved/shapeable boards, kinds of decorative models can be made with your infinite creativity.
Fixing:
Choose a way to fix CMAX board according to the substrate to be fixed. Normally, using modified tile adhesive for solid concrete wall/floor and strengthened by mechanical fixings when necessary while only using mechanical fixings for wood and steel frames.
Reinforcement:
1. Dry areas: reinforce all joints between boards, floors and walls by 125px or 250px wide self-adhesive tape.
2. Wet areas: reinforce by suitable waterproof tape.
Waterproof strengthen:
1. Strengthening all joints between boards, floors, walls and mechanical fixings placements by suitable waterproof tape.
2. Strengthening joints between walls, outside corners and inside corners by special corners.
3. Sealing pipe holes with special waterproof tape.
4. Strengthening once again by waterproof glue, liquid tanking membrane, tanking membrane paint, etc. when necessary.
Coating of panels:
Should always be covered by ceramic tiles, mosaics or other equivalent non-fireproof materials after installation.
FAQ:
1.
Q: Are you a manufacturer of insulation materials?
A: Yes. ourselves manufacturer of thermal insulation board.
2.
Q: What is the seaport near your plants?
A: The nearest port is Shanghai Port, there are about 100km from the port to our plant in Shanghai.
3.
Q: What is annual production capacity of your main products?
A: 200,000 piecs per month.
4.
Q: Do you have your own brands? And what are they.
A: Yes. we are a fortune 500 company, our brand is "CMAX"
5.
Q: Is sample available for testing?
A: Yes. The sample is free.
We do OEM as well. Welcome to make an enquiry and we will give you quick response in 12 hours!
- Q:How to distinguish between good and bad insulation board insulation board
- Your main source of high temperature in the room is the west of the glass and the south of the window you can in the west and south from the glass 20_50 cm hanging curtains so much of the heat was blocked the roof available 60 * 60 gypsum board ceiling that Economic effect and good ceiling 15-18 yuan per square
- Q:Roof insulation layer is extruded polystyrene foam plate how set the amount of set
- The honeycomb structure of the thick plate, there is no gap, this closed-cell structure Insulation materials can have different pressures (150-500Kpa) at the same time have the same low value of the thermal conductivity (only 0.028W / MK) and enduring excellent insulation and compression performance, compressive strength up to 220-500Kpa.
- Q:Steel structure rock wool sandwich wall panel what the amount of this set
- Indoor insulation is generally made of "polystyrene foam board", the general thickness is 2..3 cm thick, you can understand clearly, in the end is how thick the foam board (when playing screw holes, can be found is thick thick foam board) The First play expansion bolts, do insulation, can say the details of the point. There is that you can use .7 inside the expansion of the screw, to Fu Fu Huang Peng, You can also use welding, then a long screw, is also very simple.
- Q:Roofing the top of the extruded polystyrene insulation board generally how much weight ah?
- The bar spacing is called 'step distance', 1.2 ~ 1..1.8m, no minimum spacing, maximum 1.8m. Pole spacing 1..1..1.55m, no minimum spacing, maximum 1.55m. See JGJ130 Haifa Fenzhuang Curcuma Gufeng Koufukai -2011 "Construction Construction Fastener Steel Scaffolding Safety Technical Specification" 'Structural Requirements'.
- Q:The traditional ceramic insulation board, the existing thermal insulation coating in addition to the process and the construction period there are similarities and differences there are differences? Which energy-saving building is better?
- Because the middle of the lap will lead to fasteners, fasteners can not withstand such a large force, and the top can withstand
- Q:I set up in October 2008, the production of XPS board - that is, with the extinction of polystyrene foam plastic plate, is an energy-saving environmental protection materials. Consult experts: I can enjoy the relevant tax incentives?
- the inner wall insulation, as the name suggests is the wall inside the house Hu Dangan citrus spinning song dead building, the use of spraying, bonding, pouring, etc
- Q:What is the difference between extruded polystyrene board and XPS insulation board?
- Brothers asked, what is the price of extruded board in 2008 to do a report need to trouble to tell the next thank you
- Q:25 thick extruded polystyrene plastic insulation board how many kilograms per cubic meter
- 2 fastener type steel pipe stent construction must be prepared before the construction program
- Q:Sound insulation and polystyrene insulation board which sound insulation better?
- Can be considered ultra-fine inorganic fiber spraying, this insulation material is sprayed up, not limited by the shape of the building, the speed is still fast
- Q:Why extruded board (XPS board) is the best insulation board material
- Scaffolding from the erection of the main points on the scaffolding, cantilevered scaffolding and climbing three. High-level general use of floor and cantilever set of set enough to set the dumplings rush to set off the boat to Long. If the number of layers to more than 30F, and the structure can be relatively simple climbing scaffolding, climbing the advantage of the higher the height of the higher relative to the cost of picking. I am a professional scaffolding company, do not understand can ask me. I hope I can help you.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
xps extruded polystyrene tile backer board for Shower Room CNBM Group
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 200000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
