ul fm sprinkler hanger and pipe clamps

Ref Price:
$0.03 / pc
Loading Port:
Qingdao
Payment Terms:
TT LC
Min Order Qty:
100 pcs pc
Supply Capability:
300000pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Usage: Pipe Clamp
Material: steel、matel;Galvanized iron ,stainles
Band width:3mm/20mm
Connection:welding
Model number:As your requirement
Structure:Swivel clamp
Certificate:ISO9001:2008
Feature:
1.Use the open internal and external circle structure,and with screw fixed.It is effectively to solve the problem that when small diameter solft tube connect the hared tube,it is easy appear dead angle,and liquid or gas leakage problem.Easy structure,Easy maked.
2.Edge is no burrfree,it is ability to prevent the tube damaged
3.By a efficiently hydrogen relief treatment,long-term use needn't to worry fracture and other problems
Surface: zinc plated Packaging
4.Accord with DIN3017 Standard.By 48 hours salt and fog test,it has a good corrosion resistance
5.By our last 48 hours elastic test,to insure a high strength mechanical properties.
6.Easy to fix.
Working Temp: -40 ℃ ~ 110 ℃
Size:3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2
Structure: Suspension Clamp and so on On-time shipment and pre-shipment product quality safeguards clamp is mainly used in automobiles,tractors, ships, gasoline engine, and so on each kind of mechanical
device for oil, gas, hydraulic hose connector, various types of
rubber tube interface must join parts fastening.
Detail: plywood case ,pallets or any other package as buyer's requirements
Delivery Detail: about 20-30days

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to measure the current limiting resistor of electrostatic ring?
In addition, there is a kind of clamp type meter like grounding resistance tester, will be measured a forceps, data is displayed, but very expensive, to tens of thousands of yuan a
Q:Emerson DC panel
The float into module frequent discharge state, with second questions. The second question will be ready as soon as it is ready.
Q:How to find out the broken capacitor in the three-phase capacitor of the reactive compensation cabinet with the clamp table?
Electrical operation rules specified in the current method for measuring power capacitor should be removed after online with the corresponding voltage level of the shaking table measuring attention before measuring the discharge if there is damage to the capacitor must immediately remove power treatment to prevent explosion harms people body and equipment safety of capacitor fault.
Q:How to use the correct measuring clamp current meter
Using the graphic method of current clampClamp meter AC DC current measurementClamp meter measuring voltage clamp meter surge current measurement
Q:Clamp type meter use
The clamp type meter is a meter for measuring the current size of a running electrical circuit. It can measure current in the case of constant power.
Q:The specific use of the clamp meter
Clamp a line, the measured value is the current of this line, if there is a line can not be clamped, you can clamp two at the same time.
Q:The power consumption of the same load, different power motors?
When the 380V/55KW motor is full, the current is 100A. You only have 70A now, which means that your load is only about 35KW37KW motor can be used instead of the current slightly less than 70A, but not much. Nothing changed, slightly less. Idle work will be much smaller.
Q:How to maintain and maintain the communication and power room?
The quality standard of power supply should be uninterrupted to the communication equipment. First of all, the quality of power supply should be guaranteed to meet the standard. In the regulation of telecommunication power supply maintenance China Telecom "(hereinafter referred to as the" Regulations "), the DC power supply voltage, DC power supply circuit connector (outside the joint pressure drop distribution screen, DC) the parameters of voltage, power supply standard AC mains power and AC power supply in the oil machine noise voltage, frequency and power factor so do the detailed requirements. At the same time, the regulations also specify the parameters such as three-phase supply voltage unbalance, voltage waveform, sine distortion rate and so on. From the above standard requirements, we can see that in the test of daily power supply quality
Q:How to auto discharge clamp current meter
The secondary winding clamp current meter straight through current transformer winding in the core and AC current meter is connected to the primary winding, it is measured through the wire transformer center. The knob is actually a range switch, the movable wrench role is part of the core and core transformer, so as to clamp people measured wire.When measuring the current, press the wrench, open the jaws, the measured current carrying wire in a bushing type current transformer, when measured in alternating current through the wire, flux of AC current induces a current in the transformer windings, the current through the coil of the electromagnetic current meter, the pointer has the deflection, the dial scale that the measured current value.Before measuring, check whether the indicator of current meter points to zero, otherwise mechanical zeroing should be carried out. Before measuring, should also check the opening and closing of the jaw, jaw for movable part freely and with close contact on both sides of the jaw. If there is oil and debris on the jaw, application of solvent wash; if there is rust, should gently wipe. Make sure that the jaws are tightly joined in order to reduce leakage flux and improve measurement accuracy.
Q:How to measure the motor current with a multimeter?
Measurement of direct current. The first black probe into "COM" hole. If the measured current is more than 200mA, will be the red pen into the "10A" Jack and the knob to direct "10A"; if the current measurement is less than 200mA, the red pen into the "200mA" Jack will knob to the appropriate range of DC within 200mA. When adjusted, it can be measured. String the multimeter into the circuit and keep it steady until you read it. If the display is "1.", then to increase the range; if the numerical left "-" appears, indicates that the current from flowing into the black pen multimeter.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range