Synthetic Resin Roma Roof Tile in Antique Color
- Loading Port:
- Qing Dao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 SQM m²
- Supply Capability:
- 1300 SQM Per Day m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Antique Color Synthetic Resin Roma Roof Tile
Roma Roof Tile is 6-roll plastic roof sheet coated with synthetic Geloy ASA resin which is supplied by GE USA. Geloy ASA resin greatly prevents roof tile from discoloring, △E is 2.22 after 10,000 hours accelerated aging test.
Roma is an alternative of steel roof tile because it is more stable in physical property and in color even under ultra-violet radiation, dampness, heat, chillness and impact.
It's resistant to most chemical such as acid, alkali, salt, etc. In China National Test Center's wind test performance report, Roma achieves 2.0KPa result. Therefore, it is an ideal roofing material for the applications in coastal areas with severe salt fog corrosion and the areas with severe air pollution.
Parameter:
Type | Roma Tile |
Width | 1045mm |
Cover Width | 910mm |
Wave Length | 328mm |
Length | Customerized |
Standard Weight | 6.1kg/m2 |
Purlin Space | 660mm/990mm |
Thickness | 2.5mm/3.0mm |
Finish | Matt/Glossy |
Applications of Antique Color Synthetic Resin Roma Roof Tile
The Synthetic resin Roma roof tile is suiltable to be used in the area of prefabricated building, modular house, residential/commercial building, carport, shed.
Package& Delivery of Antique Color Synthetic Resin Roma Roof Tile
Wooden pallet,according to custom requires.
Properties of Antique Color Synthetic Resin Roma Roof Tile
--Environment friendly and energy saving: no asbestos and no carcinogen released
--Color lasting: according to the ourdoor service result in Arizona and Florida in USA which have strong sun shine, it is proved that ΔE≤5 can be guaranteed within 10-15 years
--Load bearing
--Sound absorption and heat insulation
--Stable volume
--Corrosion resistance
--Good water resistance
--Temperature bearing: -40°c~72°c
--Light weight
--Difficult to be burned
- Q:Synthetic resin tile used in what place more, in addition to flat slope change it ~
- With a light weight, high strength, waterproof moisture, anti-corrosion flame retardant, noise insulation and other fine features Need synthetic resin tile can be found in the rich Plastic Co, Ltd their price is more reasonable, not expensive, and their product quality Very good, make a phone call to ask it, the phone is 133 ten 281 ten 136 ten fifteen
- Q:What are the properties of the anti-corrosive synthetic resin tile, the roof of the family can use the anti-corrosive synthetic resin tile?
- Experiments show that: salt, alkali and 60% of the following acid soak for 24 hours without chemical reaction
- Q:150 square meters of housing roof pouring glazed tiles how much money
- Glazed tile is a small piece of a small piece of stitching, lap 1 square meters about 33 glazed tiles, glazed tiles of the market price of 2-2
- Q:I would like to ask you, in addition to ASA synthetic resin tile, what is the tile ah?
- According to me, it is sure that it is the ASA synthetic resin tile. There are PVC anti-corrosion tile, PPVC composite tile, APVC anti-corrosion composite tile, ASA four super-decay resistant composite tile, wall tile, giant force tile, anti-corrosion purlins, translucent tile, FRP tile, FRP weather corrosion tiles, FRP lighting tile wait wait wait.
- Q:How to identify the advantages and disadvantages of synthetic resin tile
- Unhealthy synthetic resin tile surface layer will produce chemical reactions, and even produce fading
- Q:What is the best roof for the supply of high-end villas?
- European-style flat tile is a high-end roof decoration, waterproof products, it is natural natural style, was dedicated to the pursuit of grade villas and various high-grade buildings
- Q:Synthetic resin tile the most effective and most direct detection methods are wood?
- ) 2 Artificial aging test report (artificial aging time equivalent to the actual use of 20 years Above) 3 Fire building materials testing report (building interior decoration design fire safety regulations A26 plastic combustion performance to determine B1 level above) standard synthetic resin tile itself has a very good anti-load performance, the national building materials and components quality supervision station testing , In the support interval 750MM, uniform load 150KG case, without any damage Poor synthetic resin tile workers are trampled when they are laid on the tile 4 The standard synthetic resin tile can be long-term resistance to acid, alkali, salt and other chemical substances corrosion, experimental soaking salt, alkali and 60% of the following acids in 24 hours without chemical effect The inferior synthetic resin tile surface layer with its pigment will produce a chemical reaction, or even produce fading ) remind you in the procurement of synthetic resin tile, should pay attention to the following four points: if not for the professional (), the United States, Material sample identification, weigh the sample, too light, bounce up the sound, can not be used; the test report can not explain everything, but there is no problem But also pay attention to some individual small factory fraud behavior; the price comparison point of view, too cheap you have to pay attention to, and may be playing a boring package, the use of poor material synthesis to reduce costs, there have been such cases; as much as possible to choose a more well-known manufacturers or professional manufacturers, do not believe boast so-called "strong", "big", the most important market reputation
- Q:Synthetic resin tile profile, synthetic resin tile specifications, synthetic resin tile installed?
- Is the use of modern technology with antique-style design and construction It is divided into two layers: the last for the anti-aging layer, is 02mm thick ASA resin material covering synthesis The lower layer for the impact, corrosion-resistant, is 28mm thick PVC chemical materials and other auxiliary materials composed of co-extrusion synthesis ASA (English name: AcrylonitrileStyreneacrylatecopolymer engineering plastics is acrylic rubber and acrylonitrile, styrene graft copolymer) PVC that is polyvinyl chloride English referred to as PVC (Polyvinylchloridepolymer = PVC molecular structure), is the role of vinyl chloride in the initiator under the polymerization of thermoplastic resin Reference materials can be under Google: Yiming synthetic resin tile
- Q:Synthetic resin tile tile for flat slope, in the election when the tile, how to choose?
- Synthetic resin tile tile for flat slope, in the election of the tile, pay attention to the following slightly, to ensure that you choose a good tile
- Q:Why is the price of synthetic resin tile 3.0 cheaper than 2.0?
- 2 to 14 (20 mm thickness) by weight of about 2
1. Manufacturer Overview |
|
---|---|
Location | Shandong, China |
Year Established | 1996 |
Annual Output Value | Above US$ 100 Million |
Main Markets | 30% South America 20% Southeast Asia 20% Africa 10% Mid East 10% Eastern Asia 10% Central America |
Company Certifications | ISO 9001:2008;CE |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Qingdao |
Export Percentage | 21% - 30% |
No.of Employees in Trade Department | 21-50 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | 30,000-50,000 square meters |
No. of Production Lines | Above10 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High; Average |
Send your message to us
Synthetic Resin Roma Roof Tile in Antique Color
- Loading Port:
- Qing Dao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 SQM m²
- Supply Capability:
- 1300 SQM Per Day m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords