Features of White Top LED PLCC 2 LED 3528 LED
Emitting angle: 120°
Driving current: 20mA
LED chips: Taiwan Epistar/Japan Nichia
Packaging: bulk/tapping reel
Colors: white/warm white/red/green/blue/amber/orange
CCT: 2800 to 10000K
OEM, ODM and customized designs are welcome
Operating temperature range
Storage temperature range
Peak pulsing current
Indicator and backlight for audio and vedio equipment
Indicator and backlight for office and family equipment
Flat backlight for LCD's, switches and symbols
Light pipe application
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
30-40 business days
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:What is the rated current for the white patch LED?
- LED high power and low power, small white rated current and LED wafer, such as a chip is 20MA two 40MA.... High power 0.5W, 100-150MA, 1W, 350MA current rating in the relevant product specifications
- Q:What is the principle used in SMD LED lamp, should pay attention to what the problem?
- Table 1, contact electrostatic protection LED product should be covered with protective electric tape, and its reliable grounding; 2, personnel shall wear groundstrap in contact with LED (best for cable, protective gloves, anti-static ring) allows better wear anti-static clothing, anti-static shoes and static electricity cap; 3, the application in the process of exposure to LED equipment must be reliable grounding, such as iron, shearing machine, bending machine and welding equipment. Conditional still can install plasma fan to eliminate electrostatic; 4, in use or when designing electronic circuit, must consider the harm that excessive current has to LED
- Q:LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- L electrode for eutectic solder reflow, the other can be used, regardless of the kind of welding, the temperature is not lower than 100 degrees, the flammable soluble materials have strict requirements, depending on whether the welding temperature is lower than the melting point of what you said or. Otherwise, there will be deformation or damage to the material in the reflow process.
- Q:Why is the patch LED blue light dim?
- If you choose the brightness of blue light in the light of the relatively high, so when debugging the white balance (by changing the resistance to change the current, and then change the RGB brightness LED lamp), it is difficult to transfer to the pure white. Therefore, when selecting the lamp, the blue light is generally not bright.
- Q:How many voltages and how many W drivers are used in series and parallel connection with 20 1W patches LED?
- In series, the voltage is 20 times the rated voltage, in parallel, the voltage is rated voltage, but in tandem, a LED is broken, it is not bright, so it is recommended not to use it.
- Q:How to detect LED SMD beads
- Resistance voltage ordinary pointer table 1.5V in general, and some only in the high resistance file (*10K file) with 9V or 15V battery, so the pointer table to measure LeD beads to hit the highest resistance profile measurement, otherwise useless, of course, at this time the brightness is very small, can not see, can only to judge the positive and negative resistance values see.
- Q:What is the difference between patch LED beads and LED beads: General
- A pin of the lamp, and outside a resin cap, because the reason LED beads can spotlight cap;There is no pin on the patch and there is no resin cap outside. Because of the lack of cap, the LED patch can not be concentrated.Patch is based on small power, the shape is relatively small (usually 0.5 and 0.5W products)It's called patch because some small ones need Mounter to machine.The ordinary LED lamp, solder joints than SMD beads, now is the largest artificial welding. Regular watts count from 1-300W
- Q:Patch LED manual welding, how can welding not burn lights?
- The welding speed and welding time because certainly give light foot heat, so the speed must be fast, tin wire and tip with better, while heating to tin iron head, avoid heating time is too long.
- Q:What does "1210" mean in patch LED?
- 1210 represents the size of the LED package specification (size, specification), and represents the length and width of the resistanceSpeed adoption!!!
- Q:What is the difference in performance between the LED plug-in and the LED patch?
- No difference, because the core of the two is the same, are diode PN junction, but no packaging, the production process is a little different
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range