Pedestal
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- Matching The Quantity of Floor pc
- Supply Capability:
- No Limited pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Pedestal for Raied Floor:
High quality, galvaized steel ,used for raised access floor adjustable ,any height can be made.
1.This kind of the pedestal`s height could be 35mm ---150mm .
2.The best height is 50 mm
3. with or without square tube stringer steady connect the system
4.Save the space of the room.
Product Description of Pedestal
Cross Head Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M18 or a M20 solid steel rod which is welded to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm-2.5mm, Diameter 22mm-50mm) and provides greater load bearing capacity.
Finished Floor Height: 80mm - 1500mm. Each access floor pedestal allows for approximately 15mm-25mm height adjustment.
Floor Pedestals Coating: Galvanized or an Electrophoretic coating
Performance Selection Chart
Item |
FFH(mm) |
Horizntal Load (N) |
Vertical Load (18KN) |
Pedestal head |
Screw Rod |
Pedestal Tube |
Pedestal Base |
CL-PDT 80~150 |
80~150 +/-15 |
500 |
Did Not Collapse |
70x70mmCross Aluminum |
M18 Or M20 |
/ |
100x100mm |
CL-PDT 200~500 |
200~500 +/-25 |
500 |
Did Not Collapse |
70x70mmCross Aluminum |
M18 Or M20 |
Dia. 22 or 25mm |
100x100mm |
CL-PDT 550~800 |
550~800 +/-25 |
500 |
Did Not Collapse |
70x70mmCross Aluminum |
M18 Or M20 |
Dia. 32mm |
100x100mm |
CL-PDT 850~1500 |
850~1500 +/-25 |
500 |
Did Not Collapse |
70x70mmCross Aluminum |
M18 Or M20 |
Dia. 38mm |
120x120mm |
- Q:Computer room anti - static floor of the room design standards
- Activities under the floor of the space only to use the cable laying, the floor height of not less than 250mm. If used as air-conditioning static pressure box, the height of not less than 400mm
- Q:General room commonly used anti-static floor what price?
- Package installed. The About 150-200 yuan a flat. The Need to be able to find me
- Q:Why the same is the polyester fiber clothes some static serious some will not
- Static electricity, it should be the clothes of the material is not anti-static pretreatment. No static or static it serious, must be added anti-static agent.
- Q:Do the best anti-static flooring brand which?
- The elephant floor of the brand should be the boss of the bar, sales have been very good, especially the old man prostitutes 薨 magic weapon for its quality, environmental protection is also good, as if the recent news that the elephant floor by the State Forestry Administration Awarded low-carbon competitiveness of the leading enterprises.
- Q:The height of the static floor in the central control room is not required
- Of course! The height is related to the material of the electrostatic floor
- Q:Will the silk be static?
- Silk will not be static, only artificial nylon material will be static!
- Q:How to install anti-static floor
- Step: 1, floor cleaning; 2, carefully check the surface flatness and perpendicularity of the walls, such as found not to meet the construction requirements, the departments concerned party; horizontal pull, the well floor mounting height with elastic ink line on the wall, ensure that the laying of the floor at the same level, the measuring chamber length, width, and appropriately select the laying reference position to reduce the cutting floor. the installation grid lines bracket the ground; to be mounted bracket is adjusted to the height of the same needs and the stent Ling Li and Gu pad pedicle cutting jig placed slightly bite into the ground of the cross grid lines; 3, with the screw secured to the frame beams, and with a spirit level n beams, perpendicular to each other and so that on the same plane ; with a suction plate is placed on the transom in the assembled floor: the square by four, if the size is less than the remaining wall length of the floor itself, the available methods for cutting floor fight Lee; 5, Edge; 6, clean up the site, completed; note 1, when the laying of the floor, with a bubble level leveling, the height adjustment bracket on the floor; 2, placing heavy apparatus at the room, the device should be in the base The lower plate installation bracket to prevent deformation of the floor; 3, when the floor needs to be cut or opening, the application opening in the corner drill hit Φ6mm-Φ8mm circular, veneer prevent breakage.
- Q:Anti-static activities floor steel anti-static floor 600 * 600, with 300mm high bracket above is a list of items, thank you tigers Hong Kong Kaifu yellow song wounding brother Big Brother to help solve! More
- There is nothing on the scale of their own can be compiled.
- Q:Network room anti-static floor, how to do grounding
- Ground bomb box grid line, bomb line to be repeated correction. In the room around the wall to install angle steel bracket, metal shielded net (with 10mm wide copper and paved all the room under the floor of the foot, the formation of the following figure, and then press the multi-point and fixed in the room around the copper strip separated by 5-5.5 and copper With a connection) and the machine room connected to the copper, connected to form a complete room shielding system, with grounding, anti-static, anti-interference effect.
- Q:Is there any level of anti-static floor?
- There is material of the points, the resistance parameters of the points.
1. Manufacturer Overview |
|
---|---|
Location | Changzhou, China |
Year Established | 1991 |
Annual Output Value | Above US$ 50 Million |
Main Markets | Mid East; Western Europe; North America; Oceania; Eastern Asia |
Company Certifications | ISO9001-2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 100% |
No.of Employees in Trade Department | 30-50 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | 150,000 square meters |
No. of Production Lines | 5 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | Average |
Send your message to us
Pedestal
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- Matching The Quantity of Floor pc
- Supply Capability:
- No Limited pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches