Q:How many watts are there in one meter, 70 bead, LED lamp?

A 70 meters Pearl LED lamp belt, if using 5050 beads, its power is 14 watts; if the 3528 beads, its power is 4.2 watts; if the 2835 beads, its power is 14 watts; the lamp power is not the same.

Q:PCV flame retardant material toxic? (LED background light band)

From the aspects of health, non-toxic materials design products to the high price, especially indoor LED lighting, do not use cheap smell of LED lighting, currently only a handful of LED manufacturers are manufactured using non-toxic materials, identify the method can be directly used nose respectively, smell a lot of products at lower prices than no odor. Similar toxins, such as lead, mercury and cadmium, should be analyzed by professionals. From the application of environmental safety, there is a reliable dust control design, material fire, UV protection, anti - low temperature cracking LED products high prices.

Q:The new LED lights are always flashing. What's the matter?

This kind of problem is estimated in two cases: 1. Does the plug and socket of your power supply match and make sure that it is normal? Please replace the plug or socket try, check whether the normal power supply; 2, is also a "flash", should die power drive problems, there may be driven by the output voltage and the LED lamp with your required driving voltage is not uniform (you can test whether, or understand your lights need the driving voltage), there may be power supply inside the drive has been damaged, you change a driver, try it;

Q:How does the PS make the band?

This simple ah, on a new layer, with a white brush, or other color you want, draw a strip (lines), and then to the layer with a layer style, choose the Outer Glow layer style, select the color you want, and the appropriate size, value can be.

Q:LED lights with 0-10V dimming when flashing what reason?

When the input voltage is lowered, the loop current is also reduced to below the SCR holding current, and then the thyristor is turned off.

Q:How do I choose the light belt?

Light color choice belt mainly according to the customer's own style of decoration and color to determine the general Jiezhuang recommended with warm white, the color is yellow and white light color comfort, moderate brightness, decorative effect is warm. White LED decorative effect, clean and tidy. Light color consistency is good, suitable for simple style. The yellow light effect LED tone warm, but because the Yellow LED lamp luminous efficiency is not high, light is dark, so the color is dull. The use of more than the recommended number. Blue can be placed in the bar, the effect of the dream is fresh, whole room decoration ring can also highlight the glamorous and elegant style of decoration. The red and green light belt needs to be used with the background. It is not recommended. The color light needs to be coordinated with the controls. It can be used in audio-visual rooms and other decorations.

Q:What are the features of a LED lamp?

The biggest thing about LED is energy saving.The LED crystal lamp comprises a lampshade, a base for fixing the lampshade, a lamp cap positioned at the top of the base, a plurality of circuit boards electrically connected with the lamp head in the lampshade, and LED crystal and crystal arranged on each circuit board.

Q:Series parallel Led light band problem

It depends on the power supply voltage of your lamp belt. I don't know what you're using. If one meter is as long as 7 meters, it doesn't matter. As for the principle of luminescence, they are the same. But sharing the same transformer, that is, the power supply, must be the same as the two required supply voltage, otherwise it is easy to burn the lamp belt.

Q:Does the LED light band save energy?

LED lights must be more energy efficient than traditional ones, and the brightness is high

Q:LED lamp with a whole such as bad if not how to detect the lamp with a lamp quality

Designed for series LED light band, if a string of LED burned out, the whole string is not bright. The lamp band can also be a series of series LED series parallel connection, such as a low voltage lamp belt; 2 x2=3v batteries connected with five 1.5V batteries are connected to the lamp string, and each LED can detect the bad LED.