Q:LED underwater lamp features of LED underwater lamp

Antistatic measures should be made. LED underwater lamp products to adopt certain anti-static measures, in the process of production and installation such as bench to ground, workers should wear anti-static clothing, anti-static ring belt, and belt of anti-static gloves, conditions can install electrostatic ion wind machine, but also to ensure the installation the air humidity is about 65%, in order to avoid the air is too dry to produce static electricity. In addition, different quality grades of LED anti-static ability is not the same, the quality of high grade LED underwater lamp antistatic ability better.

Q:LED how many protection levels does the underwater lamp have?

Dust ratingThe national standard stipulates that the dust rating of lamps shall be divided into 6 grades. Among them, sixth is the highest, LED underwater lamp dust level should reach 6, and its mark is: IP6X.

Q:How can the underwater lamp be buried in the pipeline?

The protection grade is IP68., and the lamp has a special stainless steel waterproof terminal box under the water.

Q:How can I check the LED light?

There are different technical requirements, such as moisture-proof, dust-proof, antimagnetic, lightning protection etc..

Q:Installation method of underwater lamp and matters needing attention

As for other wiring, wiring joints do waterproof, general water electrician, decoration workers can basically deal with

Q:What are the components of the LED underwater light source?

The last one to use 5630 beads, each 0.5W, usually used as a floodlight (such as lamp, lamp panel, Mian Guangyuan), the lens is relatively small, with a kind of light diffusion plate.

Q:LED underwater lamp, LED underwater lamp, transformer characteristic

In theory, the safest approach is to place the high pressure (220V) part above the surface of the water, and the lower part to be placed in the water.

Q:What method of wiring underwater lamp will not enter the water to burn it?

Some attention should be paid to the installation of the LED underwater lamp:1 、 LED underwater lamp should be powered by DC constant current power supply. In the constant current power supply under the control of LED wall lamp, LED lamp, LED underwater lights, LED lights buried according to the pressure drop increases with the temperature of LED chip becomes smaller, so the situation is not too large for LED underwater lights. But if it is a constant voltage drive, it will cause LED underwater lamp chips to increase with the temperature, the current is increasing, and in serious cases may even destroy the LED underwater lamp. Therefore, the LED underwater lamp should be powered by DC constant current power supply.2, need to do anti-static measures. LED underwater lamp products to adopt certain anti-static measures, in the process of production and installation such as bench to ground, workers should wear anti-static clothing, anti-static ring belt, and belt of anti-static gloves, conditions can install electrostatic ion wind machine, but also to ensure the installation the air humidity is about 65%, in order to avoid the air is too dry to produce static electricity. In addition, different quality grades of LED anti-static ability is not the same, the quality of high grade LED underwater lamp antistatic ability better.

Q:What are the main parts of LED spotlights?

The LED lamp can be very good for exposure to a specific location or specific items in order to highlight the role of the general LED lamp is 15 degrees, 30 degrees, 45 degrees, 60 degrees and the angle of illumination, such as hotel, Home Furnishing, bars, shops, clothing stores can be used, use is very extensive

Q:What is the LED power of underwater light?

Single 1W power high-power lamp of the lamp is so general LED 3W6W9W. Max also has dozens of Watts