Product Description:
cpvc plastic fittings raw materials from KANEKA japan laser marking high rigidity easy installation corrosion-resistant PN25 ASTM2846 standard size:1/2''--2''
1.Material:Random Polypropylene(Hyosung R200P);
2.ISO9001&ISO14001;
3.Standard:GB/T 18742.3-2002, DIN8077/8078;
4.OEM also ok
- Q:What are the common connecting methods for plastic PP pipes?
- Because the hot melt connection method does not need any additional material, and can melt the connection part as a whole, achieves the body strength, the connection effect is good, therefore, here recommends the use of hot melt connection method. The use of hot-melt bonding method should pay attention to the following: first, the hot melt tool to connect the power supply, to the working temperature, the indicator light before the start of operation; II. Cutting the pipe material, you must make the surface perpendicular to the pipe axis. The general use of pipe cutting scissors or pipe cutting machine, using sharp hacksaw when necessary, but after cutting the pipe section should remove burrs; the PP pipe and pipe connection end must be clean, dry and free of grease; the welding elbow or three pass, according to the requirements of design drawings, we should pay attention to its direction in a straight direction pipe and tube, mark the location with the auxiliary mark the connection, no rotation; the end of the guide tube heating sleeve is inserted into the standard depth, at the same time, no rotating the pipe onto the heating head and reached the prescribed mark; the heating time is reached after, immediately put the pipe and pipe fittings from the heating sleeve and the heating head removed simultaneously, quickly and without rotation inserted into the standard depth, making joints form a uniform flange of the joint can be corrected, but not the rotation; to a prescribed cooling time, will The pipe cover is buckled on the pipe fittings.
- Q:Plastic pipe fittings and plastic doors and windows on the stain in what way?
- With the immersion of detergent in warm water, and then wipe with a sponge that wash water. Then wipe it with a dry towel.
- Q:Plastic pipe fittings and cast iron pipe fittings are not the same technical field
- Plastic fittings are of national standard.Plastic pipes are usually made of synthetic resins, that is, polyester as raw materials, adding stabilizers, lubricants, plasticizers, etc., to "plastic" method in the pipe mill by extrusion processing.
- Q:What's the size of the PPR pipe?
- Using a special scissors cutting vertical pipe, the incision should be smooth, without burr, such as must be cleaned before welding, welding parts, cleaning pipes and fittings, avoid sand and dust quality joint damage.Two. Mark the depth of the end of the tube with a marker.Three, with the welded pipe size matching heating head assembly welding machine, connect the power supply, waiting for heating head to achieve the most work temperature (260 + 10 degrees Celsius)Four. Meanwhile, pipe and fittings are inserted into the welding machine and heated according to the prescribed time. The heating time is shown in the hot melt connection process parameter table
- Q:What is the plastic pipe joint of water supply pipes?
- This depends on what kind of plastic you use, for example, you want PPR that connector is PPR pipe fittings
- Q:What kind of flange gasket does the ABS plastic tube work with?
- A pipe fitting is a piece of pipe that is connected to a pipe. According to the connection method can be divided into socket type pipe fittings, threaded fittings, flange pipe fittings and welding pipe fittings four kinds.
- Q:How to choose PPR pipe and pipe fittings?
- No matter whether touch: fine grain market uniform PPR pipe is mainly lime green colors like white plastic received the promised white is actually tend to think a one-sided point of view with technology updates improve color discrimination PPR standard tube bad bad look can solve the problem of rough particles can touch the impurity incorporation
- Q:TTP-PESI hole net steels belt composite pipe fittings need to be taken?
- The wire mesh and steel band composite plastic pipe is one of the achievements in the Ministry of construction's scientific and technological achievements. As a transportation pipeline, it can be widely used in petroleum, chemical, pharmaceutical, mining, municipal engineering and so on.
- Q:What kinds of PE pipe joint
- PE pipe joint into sleeve, elbow, three, three, two grade saddle.
- Q:May I ask whether the steel mesh skeleton plastic composite pipe can be installed as the same PE
- The steel wire frame plastic composite pipe is suitable for the installation of overhead and underground pipelines with medium temperature of 0~70 degrees celsius.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
cpvc plastic fittings raw materials from KANEKA japan laser marking high rigidity easy installation corrosion-resistant PN25 ASTM2846 standard size:1/2''--2''
