Quick Details Of High Quality Aluminum Foil Tape T-FG1801RS:

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

CONSTRUCTION Of High Quality Aluminum Foil Tape T-FG1801RS:

Backing: Foil-fiberglass Cloth Laminate (Foil 18u / Fiberglass Cloth 80gsm)

Adhesive: Flame-retardant, solvent-based acrylic adhesive

Liner: Silicone release PE-Coated paper, white color.

TYPICAL PHYSICAL PROPERTIES Of High Quality Aluminum Foil Tape T-FG1801RS:

Peel Adhesion to backing: 15N/25mm (PSTC-1)

Rolling Tack (11mm ball): ≤20 cm (PSTC-6)

Fire Rating Class “O” (BS476 Pt.6 & 7)

Service Temperature ranger: -10°C +120°C

Sizes of Cut Roll: Width: 48mm, 50mm (2"), 60mm, 63mm (2.5"), 72mm, 75mm (3"), 96mm, 100mm (4").

Length: 27m (30 yards), 30m (100 feet), 45m (50 yards), 50m, 100m.

Based on order, special sizes and log rolls or jumbo rolls are also available.

1. The products should be stored at room temperature and kept from wet and heat source.

2. Shelf life:One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight.

3. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.

Transport Information Of High Quality Aluminum Foil Tape T-FG1801RS:

Not a hazardous material for DOT shipping．

UN：None

Packaging sign：According to the buyer

Packaging Category：No information found/According to the buyer．

Shipping Marks: According to the buyer

Remarks Of High Quality Aluminum Foil Tape T-FG1801RS:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.