Foam PVC Sheet Cutter in Laser Engraving Machines in CNBM

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Usage Life: more than 50 years Size: 1220mm × 2440mm; 1560mm × 3050mm; 2050mm × 3050mm ; or as your request . Thickness: 1-33mm
Density: 0.43mm-0.9mm

Product Description:

Product Specification

Regular size: 1220*2440mm,1560*3050mm,2050*3050mm

Thickness:1-33mm 

Density:0.35-0.9

 

Product features:

1.  Sound insulation, sound-absorbing, heat insulation, heat preservation

2.  Flame retardancy, self-extinguishing fire security, safe to use

3.  Moistureproof, mouldproof, resistance to acid and alkali, moth-proofing, qualitative light, heat preservation, water absorption performance, and the shakeproof effect is good

4. After each series of products made by weather resistance formula, its colour and lustre is permanent, not easy ageing

5.  Lightweight, storage and transportation, construction is convenien

 

Product Uses

1 mm- 5 mm: suitable for advertising supplies, electronic instrument, packaging

15 mm -20 mm: suitable for furniture

10 mm -20 mm: suitable for bath cabinet, cabinets

5 mm- 20 mm: exhibition board, indoor and outdoor decorative plate (different customers have different requirements)

3 mm coated :bus interior ceiling

 

Product Application

(1)Advertising: exhibition display, digital printing, silk screen printing, computer lettering, sign board, light box, etc.

(2)Construction: office and bathroom cabinets, inner and outer decorate panel, commercial decorating shelf, room separating

(3)Transportation: steamboat, airplane, bus, train carriage, roof and carriage inner layer and other industry.

 

Pictures

Foam PVC Sheet Cutter in Laser Engraving Machines in CNBM

Foam PVC Sheet Cutter in Laser Engraving Machines in CNBM

Foam PVC Sheet Cutter in Laser Engraving Machines in CNBM

 

 

FAQ

Q:How can I get a sample?

Answer: FREE SAMPLE can be sent to you .Freight will be collect.

 

                   

 

      

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Are plastic card sheets good coin cases?
As was stated you do not want to store coins in any fashion where they can move. 2X2 staple type Mylar holders are very inexpensive. The 20 pocket 3 ring binder pages are also to too expensive. My main problem here is the coins falling out of the card pages no matter if in or out of a 2X2 holder. Cheap storage for coins in the long run, is always a bad idea and one can lose value on their coins real quick. Morgan dollars are usually always a hot item, so one needs to do them justice.
Q:Why would a co-worker give me old diapers and a used plastic sheet bed?
Your co-worker probably just wants to help and doesn't mean any harm. Sometimes people just don't think when they are giving you something. If your co-worker has never had a baby, they just don't know any better. Also, what do you mean old diapers? Like years old or leftovers? I would take a friends leftover diapers anyday. Even if they are not the brand I use.
Q:Can I use wallpaper paste to stick gravel to plastic sheeting?
Wallpaper paste will not work in this application. It will turn to mush again as soon as moisture gets to it. Most adhesives that apply in liquid form will not work well, and almost all will have smell that remains for some time One adhesive that would work well both on plastic sheeting, have virtually no smell, and will remain solid under dirt is hot glue, but application is time-consuming, and you will have to be careful with the application temperature, as it has to stick onto the plastic, but not melt through it. A heavy-grade plastic sheet will be needed/ You have some choice in the melt points of the glue stick and can ask at the store about the lowest melt sticks they have. . The easiest solution to this might be a small craft-store glue gun and buy the sticks from them (or a dollar store) as they only use glue sticks that have a low melt point Before beginning your main work, practice applying the glue on a spare part of the sheeting and see how quickly you can work with it,
Q:What's the best glue for binding 2 plastic sheets together then filling it with water permanently?Like a pouch
I have the same problem. I have tried melting some of the plastic and pressing it between the sheets. This only seemed to melts the sheets also. I have used Gorrilla Glue, Silicone, Super Glue and Epoxy and have had no luck. Double sided tap sorta worked but it takes a ton of it. So far the best thing I have found is just using Duct tape. It's ugly and falls off in the heat of the summer but does work temporarily. I will definitely buy an iron and try that. That seems like the best idea yet. I did visit an adhessive manufacturers website and they say there is nothing invented yet that bonds sheeting together permanently. I find this hard to believe. I have used a vacumme sealer for freezer bags and it works wonderfully on really thin plastic but the thicker sheeting I need and it has no affect on that.
Q:Bendable sheet of plastic that intensifies heat from sun?
sounds like a fresnel lense
Q:What is an extrusion plate?
With high thermal resistance and low linear expansion ratio, the characteristics of the low, the obturator structure rate reached more than 99%, the formation of a vacuum layer, avoid air flow cooling, to ensure that the insulation performance of lasting and stable, relative to the closed cell foam polyurethane rate of 80%, the leading advantage is self-evident. Practice has proved that the insulation effect of 20mm thick XPS extruded insulation board is equivalent to that of 50mm thick foamed polystyrene and 120mm thick cement perlite. Therefore, this material is currently the best choice for building insulation.
Q:Can you use iron on transfer sheets on plastic?
That depends on the melting point of the plastic in question. It would be good to experiment with just one before you make big plans.
Q:Does anyone know where to find sheet music for Plastic Jesus?
It was a standard of the Chad Mitchell Trio and I know the song well, but I haven't a clue where you could get the music unless you watch the movie Cool Hand Luke with Paul Newman... he sang that song in the scene after his mother died, so you could get someone to write it down for you. Oh I don't care if it rains or freezes... long as I've go my plastic Jesus... right here on the dashboard of my car.... He is plastic, pink and pleasant... always smiling... ever present... whether I am driving near or far.
Q:will a green house made out of plastic sheets benefit my medical marijuana plants?
It might help answer your question better than I ever could
Q:plastic sheet......... ............. ........ ..?
Any store with a good paint dept will also sell plastic drop cloths of various sizes and thicknesses, one of them will meet your needs.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range