DSOW-90H Double Sided OPP Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CONSTRUCTION:
Carrier: OPP film, 25 micron
Adhesive: Water based acrylic
Liner: Silicone release PE-coated paper, white colour.
TYPICAL PHYSICAL PROPERTIES:
Total Thickness (adhesives + OPP film): 90 ± 5 micron
Initial Tack (14# steel ball): ≤80 mm
Peel Adhesion (Kg/25mm): 1.2 ± 0.2 Kg
Holding power: ≥ 200 min
PACKING:
Jumbo Roll:1.02 x 1000m
Packaging:Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
REMARKS:
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±5%; Width: ±5mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and be kept away wet and/or heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q:How do you remove the sponge double glue on the wall?
- 3, can also use the heating way to make double-sided adhesive glue softening: with a hair dryer blowing it to viscose softening, when double-sided adhesive adhesion is weak, can be removed more easily. If there is a little trace, wipe the varnish with the varnish to clean it.4, in the removal of time, whether to use light water or vinegar, must let these supplies completely soaked double glue mark, can be effective and effective removal!
- Q:How do you apply double-sided adhesive tape?
- 4. The joint of the double adhesive tape should be staggered with the joint of the plate;5, with adhesive tape, it is best to use rubber scraper, in a parallel sweep way, the tape evenly affixed to the roller, in the tape and the roller can not leave the bubble; (if the bubble retained, the application needle punctured)6, in determining the location of the printing plate, should avoid the printing plate and tape premature contact, to determine the printing position, remove the tape protection layer, the plate with rubber roll, in parallel with the way on the adhesive tape;
- Q:What are the general use of double-sided tape?
- They are widely used in leather, nameplate, stationery, electronics, automobile decoration, shoes, paper making, handicrafts, paste, positioning and so on. Hot melt double-sided adhesive mainly used in stickers, stationery, office and so on.
- Q:The advantages and disadvantages of the mesh double sided adhesive tape, and the influence of the density of the mesh on the adhesive tape.
- The utility model has the advantages of easy tearing and convenient use;Strong adhesion, can be affixed to the surface of various items, there is good adhesion;
- Q:Which is more sticky, the double adhesive oil glue and the hot melt adhesive?
- Good. And hot melt viscosity (just good colloidal strong). A long time (three months) is not easy to fall off in the winter was easy to fall off. The glue glue easy to kill. The price is low and the quality is poor
- Q:How can I use double-sided adhesive tape? I glued it for half a day without sticking it
- Tear off the required length, and then use fingernail scratch tape attached to the bark, peel can paste.
- Q:What is the relationship between the temperature of the double adhesive tape and the force of the adhesive tape?RT, double-sided adhesive tape at room temperature bonding fixed plastic products, with the increase in temperature, the adhesive force will increase or decrease, the temperature drop?In use, the material is subjected to certain external forces and minor shocks. If you want to ensure the optimum state of viscosity, should you avoid high temperature or avoid low temperature?
- If the material is relatively heavy, dangling may lead to bond failure
- Q:The double-sided adhesive thickness 0.05~3mm, similar to A3, the A4 paper size? One by one?
- In the paper, cloth, plastic film substrate, then the elastomer pressure-sensitive adhesive or resin adhesive coating made in the substrate of the roll type adhesive tape is composed of base material, adhesive, release paper (film) is composed of three parts.
- Q:How do you clean the tape on top of your notebook?
- Two: use nail polish to remove the water to see, but because the water is likely to make the original color of the wall also fell off, so it is recommended to try in a less obvious small place firstThree: take a piece of vinegar coated dry cloth to cover the entire double-sided glue mark place, and until the double-sided adhesive after soaking wet, you can easily remove with a ruler
- Q:The door frame is glued on both sides of the curtain. Now the curtain doesn't work. It can't be cleaned on both sides. How can it be removed? But it doesn't break the paint on the door It's a little bit on the wall, too.
- 3, and so on 5 minutes later, with a dry cloth to wipe, you can quickly get rid of.4, if you still feel a little sticky, just do it again in the same way.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DSOW-90H Double Sided OPP Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords