DS1-90H Double Sided Tissue Tape

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

CONSTRUCTION:

Carrier: Tissue paper

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + tissue): 90 ± 5 micron

Initial Tack (14# steel ball): 100mm

Peel Adhesion (Kg/25mm): 1.4 ± 0.2Kg

Holding power: 500 min

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll1.02 x 1000m; 1.24 x 1000m

PackagingWrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Do you really think your tape is good?
The tape is the best for your product. Generally, the price of a product is determined by quality and quantity
Q:PE foam double-sided adhesive tape for use?
Motorcycle stickers, electrical nameplate, tops and other aspects of the paste, fixed role.
Q:How do I clean the foam tape marks?
3, with Fengyoujing rub, then dropped.4, you can try a rubber. But in the beginning may feel more and more dirty, but rub a little longer, you will see the effect, this method is relatively tired, have perseverance.5, with blisters, put a little detergent, and then brush with an old toothbrush just fine.
Q:What's the chemical composition of the double adhesive?
The double-sided adhesive on the surface coated with a layer of adhesive.The wide application of polymer as adhesive
Q:What is the relationship between the temperature of the double adhesive tape and the force of the adhesive tape?
If the material is relatively heavy, dangling may lead to bond failure
Q:Does the adhesive force of double - sided adhesive have something to do with thickness?
A thick layer of adhesive on the surface of the infiltration will certainly be better, feel more sticky, but the shear strength of the adhesive will become worse, in the force of the rheological or creep of the probability of thinner than the adhesive layer will also affect the bond strength
Q:How to remove the remnants of double-sided adhesive left
Very simple, you get some industrial alcohol, with a rag to kill, not to engage in alcohol directly with dishcloth Zhanshui rub slowly, do not worry, multi wipe, double-sided adhesive will remain in a heap, and then wipe off with hands as well.
Q:Will the double faced adhesive damage the wall?
The main idea is to see what your wall is made of, if it is a metal paint, then what glue does not matter, and if it is latex paint, ordinary double-sided adhesive can be
Q:Will double face adhesive affect its stickiness in summer?
Check whether the edges of the double adhesive tape are adhered or not, and whether or not the bottom sheet is leaking of siliconDouble adhesive tape edge adhesion or some parts of the bottom sheet leakage of silicone oil, in the processing process will cause waste paper rupture, can not be normal production. Therefore, before processing, take a length of about 1 meters of self-adhesive materials, hand peeling, to see whether the edge or other parts of the smooth, uniform peeling of the parts. Usually, paper and paper edge bottom adhesion occurred in a roll coating adhesive material cutting volume, and generally occurs only in the outer layer of 7 meters to 10 meters, so the drum encountered double-sided tape cutting edge with adhesion, don't immediately assert that the whole roll of paper have this problem.Also note that stripping light weight tissues (such as 60g/m2 and 80g/m2 facial tissue) is more powerful than peeling off heavy paper, and the lighter the paper, the more tightly it feels. Because of this, sometimes, according to the customer's request to cut the shape of the customer's choice of double-sided tape, can not be completed at the regular processing speed.
Q:What are the 3M double-sided adhesive?
No substrate material, double sided adhesive (directly coated with acrylic acid): such as 3M467, 3M468, 3M9473, etc.;PET base material double sided adhesive (made from PET base material, double sided coating acrylic acid glue): such as 3M9495MP, 3M9795B, 3M9495LE and so on

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range