DC12/24V Low Voltage Led strip Light, CE ROHS UL SAA Certificate with Controller and Adatper
- Loading Port:
- Yantai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1). Product Description:
1). Products Name: Led flexible strip light,DC12V Led strip light, AC220V Led strip light, etc.
2). Input voltage (V): 85-265V AC
3). Output Voltage (V): DC12V or DC24V or AC220V, AC110V
4). SMD Type: SMD3528, SMD5050, SMD2835, SMD3014, SMD5630, SMD5730,SMD335,
5). Power Consumption Per Piece: 0.08w forSMD3528, 0.24w for SMD5050, etc. 0.10wfor SMD2835, or 0.20w for SMD2835, 0.5Wfor SMD5730, etc
6). LED Qty per meter: 30 LEDs/m, 60 LEDs/m, 96 LEDs/m,120 LEDs/m, 240 LEDs/m, others available.
7). Width: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm widthPCB board, White PCB Board or Yellow PCBBoard, Black PCB Board, etc.
8). Color Temperature (CCT): Warmwhite:2800-3500K, Natural white:4000-5000K, White:6000-7000K, Cool White:8000-15000K, other customized color available.
9). Emitting Color: Warm white, Natural white,White, Red, Green, Blue, Yellow, Pink, Purple, RGB.
10). Power per meter: 4.8W/M, 7.68W/M, 9.6W/M,3.6W/M, 7.2W/M, 14.4W/M, and others
11). Luminous Flux ( Lumens ): 4-5LM/pcs, 5-6LM/pc, 6-7LM/pcs,7-8LM/pcs, for SMD3528, and 11-13LM/pcs, 13-15LM/pcs, 16-18LM/pcs, 18-20LM/pcs, for SMD5050, etc.
12). Waterproof Type: IP20, IP22, IP44, IP54,IP65, IP67, IP68, Non-waterproof, PU glue waterproof or Epoxy glue waterproof, Better silicon waterproof, Hollow tube waterproof, PVC tube with silicon inside waterproof, Phosphor Colourful Waterproof.
13). LED Chip Brand: Epistar, Brightlux, we do notuse Chinese Chips
14). Chip Pcs: 1 chip, 3 chips.
15). Certification: CE-EMC,CE-LVD, RoHS, CCC ,UL, FCC, RoHS, UL, ERP.
16). Drive Current Per Piece: 16mA, 18mA, 20mA,58mA, 60mA, 62mA, etc,
17). Power Factor: >90%
18). CRI (Ra>):80 Ra, others available.
19). Operating Temperature (℃): 40 to +50 degree Celsius
20). Life-span (Hour): 30000 ~ 50000
21). Lamp Body Material: Copper
22). Place of Origin: Shenzhen, China (Mainland)
23). Brand Name:
24). Model Number: KU-3528-5050-60D, many differenttype of models, please refer to our pricelist
25). Warranty: 1,2 and 3 years and 5 years
26). Beam Angle: 120 degree
27). Packaging Details: 1 meter/roll, 3meters/roll, 5meters/roll, 10 meters/roll, 40 meters/roll, etc,
28). Standard export package.
29). Light Decay: less than 3% after 1000 hoursconstant work
30). PCB Board Color: White or Yellow (Brown)
31). Layer thickness: single pcb board, double pcb board.
- Q: LED lights with lights, some light, and some light, or in the middle of a section will not light
- Does the length of a section of lamp belt exceed the standard? No problem under 20 meters.
- Q: LED how much is the band of light a metre?
- At present, our company produces LED soft lamp with 30 yuan /M hard lamp, with 70 yuan /M
- Q: How to make the effect of LED light belt fixed?
- The re purchase controller (usually flat 4 line controller 10 yuan), there are generally 8 kinds of adjustable mode, there is something you need to achieve the effect, and a controller with a maximum of 40 meters with lights on the line
- Q: Led how should I choose the light belt?
- Look at work, beads is generally arranged lengthwise, solder joints in the light belt on both sides, the spot is full, shiny, poor on the contrary, if the solder joint black, said this is the stock for a long time, especially at the end, it is easy to weld, false welding, non-performing rate is very highSee the lamp, DC voltage regulator voltage to about 6-8V, each lamp light, but the light is relatively uniform, good consistency, poor light is a few bright points a few dark spots, especially the 5050 beads, a lamp which has 3 chips, each chip is normal if there is no light, light, or uneven brightness is defective
- Q: How to install the LED lamp with the plug?
- Open the plastic cover with the plug for the LED light. If you don't turn on the light cover, it's difficult even for professionals to take it, so please don't bother. 3, with the lamp with the quasi light belt lead into the inside of the lamp belt.
- Q: What is the minimum number of light bands?
- General LED lamp belt is 12V, 3 beads and a resistor in series, a lamp minimum starting voltage of about 3V, almost 3 9V, although it is lit up, but the brightness is very low, want to achieve higher brightness or to 12V, then 9-12V lamp belt between the lights. Of course, some factories also have 24V, and the same principle.
- Q: How to connect the LED lamp with constant current drive?
- One end of the line connection method: one end of the LED tube is not connected, and the other end of the two pins are respectively lead to the constant current drive power. There is no connection between the two lamp holders. The biggest advantage is that if one end of the LED tube is connected to an alternating current, then the other end will not be charged. When replacing the traditional fluorescent lamp, you need to remove the original starter, change the starter fuse, and install the tube.
- Q: What kind of material does the light belt have?
- The first is the process of LED welding in copper wire above, then put the PVC pipe or equipment used in direct forming, round and flat two, named according to the number and the shape of the lamp wire belt to distinguish between two lines called, round in front with a round, round or flat line; in front with flat characters, namely flat line.
- Q: Where is the difference between the LED lamp belt and the ordinary lamp?
- Electrical characteristics LED soft light belt power supply and incandescent lamp, fluorescent lamp is very different. The incandescent lamp can be directly connected to the alternating current of the 220V. Although there are ballasts and switches for fluorescent lamps, they also use 220V alternating current. The LED power supply requires a constant DC current, so the AC 220V is converted to dc. The efficiency of the power supply is not high, will directly affect the efficiency of the entire lighting, so improving the efficiency of the power supply is very important for improving the efficiency of the LED soft light band lighting.
- Q: Is the LED belt with a constant voltage transformer or a constant current transformer?
- LED lights with all kinds of varieties, with high and medium pressure, low voltage, AC and DC, lamp with internal general only by the current limiting resistor to protect the LED chip, is not reliable, of course, preferably with constant current drive lights, but seldom have this right drive, generally uses the switching power supply has regulated performance they are very sensitive to the change of the LED drive, the power supply voltage, the voltage variation of the weak will bring great changes in current, exceed the rated current of LED is very easy to damage. So the requirements of power supply better performance (in order to avoid the current instability), a better solution is to lower the power supply output voltage, the LED voltage derating, even if the impact is not accidental, overcurrent, caused damage to the LED, such as the low voltage of 12V can be adjusted to use low 11.5V. This will extend the service life.
Send your message to us
DC12/24V Low Voltage Led strip Light, CE ROHS UL SAA Certificate with Controller and Adatper
- Loading Port:
- Yantai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords