Ceramic Filter Plate - Ceramic Fiber Paper with Good Price
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Low Heat Storage
Low Thermal Conductivity
Excellent thermal electrical insulation
Excellent Machine-processed Capability
Ceramic Fiber Paper is processed from the high purity fiber, which can be used in the field of high temperature insulation.Because we have adopted the advanced processing work.we cannot only make the fiber interweave shapely.but also can control the thickness and the density rigidly.
A spot of bonding agent has been added into the fiber during processing.which has been chosen and controlled scientifically.can be burnt during application.
Characteristic
Low Heat Storage
Low Thermal Conductivity
Excellent thermal electrical insulation
Excellent Machine-processed Capability
Excellent broken resistance
Excellent flexibility
Low Shot Content
Technical Index
Classification Temperature | 1260 | ||
Name | 1260 Ceramic Fiber Soft Paper | 1260 Ceramic Fiber Semi-hard Paper | |
Code | HLGX-236B | HLGX-236HB | |
Shrinkage on Heating (%) | 1000°C×24h ≤-3 | ||
Theoretical Thermal Conductivity (W/m·k) | (200°Caverage) | 0.075-0.085 | |
(400°Caverage) | 0.110-0.121 | ||
(600°Caverage) | 0.160-0.170 | ||
Organic Content (%) | ≤ 10 | ≤ 8 | |
Theoretical Density (kg/m3) | 200±15 | ||
Tensile Strength(Mpa) | ≥0.3 | ≥0.2 | |
Moisture Content(%) | ≤1 | ||
Specification (mm) | 10000/20000/30000/40000×610/1220×1/2/3 /4/5 | 10000/20000/30000/40000/50000×610/1220 ×0.7/1/2/3 /4/5 | |
Package | Plastic Bag Inside, Carton Box Outside | ||
Quality Control System | ISO9001-2000, ISO14001-1996 | ||
Application
Industrial Insulating ,Sealing and protecting materials
Electric and thermal insulation materials for electric industry
Insulation materials for instrument-equipment
Insulating materials for motor industry
Filling materials for expansion slot.
Isolating materials as the sinter resistance
Sealing gasket for molten metal
Fireproof materials
- Q: Performance advantages of ceramic filter
- A ceramic filter for fine coal mud recovery, there is a base, the lower part of the frame is provided with a fine slime liquid trough, the fine slime liquid material groove is provided with a liquid level controller, the slime liquid material at both ends of the groove is provided with a negative pressure water tank, the water tank is provided with a negative pressure suction connection assembly fixing the other side is provided with a vacuum pump pipeline, the pipeline is communicated with a vacuum pump and vacuum pump;
- Q: How many degrees does the ceramic filter melt?
- You should say clearly what ceramic you useHowever, as a melting furnace or filter medium, alumina products are the most versatile, but also silicon carbide, corundum, mullite, spinel and so on. They use very high temperatures.
- Q: The vacuum degree of the ceramic filter is normal and the cake water is large
- There is a difference between the vacuum display and the actual vacuumThe main speed of the ceramic filter is too fastThe water content of the filter cake is gradually increased within 0~8 hours after the equipment has been continuously turned onThe ceramic filter plate does not meet the aperture range and the opening rate is lowThe ceramic filter plate has a near life and serious blockageCeramic filter cleaning standards (acid, ultrasonic, backwash water)The scraper can not be completely discharged, and the surface of the ceramic plate is coated with a thin filter cakeFailure to manufacture equipment or other causes of failure
- Q: How much is the accuracy of 50nm ceramic membrane filtration?
- It should be noted that due to wear, plugging and so on, the new and different degrees of ceramic film, the pore size will change. Micron scale ceramic membrane filtration accuracy is very good, nano scale aperture range of such a small ceramic film does not know in what way.
- Q: What is the reason that the ceramic filter does not absorb mineral powder?
- There may be a fault filtrate pump, diaphragm pump damage, pump mechanical seal failure, a leak, two is no output or output to the liquid, the pressure is too low, the cleaning effect is not good, the pressure is too large, will cause damage and reduce the concentration of slurry filter plate.
- Q: How can I avoid the backwash pressure in the production of ceramic filter?
- The backwashing system of ceramic filter is usually made up of water inlet, water inlet, pressure gauge, water filter and filtered water pressure gauge, and then connected to the inside of ceramic filter. Such as the discovery of ceramic filter recoil pressure became smaller or even no recoil pressure, you can carefully observe the surface of the ceramic filter plate is wet or ceramic filter plate wear without water injection at the discharge point, investigation and the reasons for the following aspects:Is the water inlet pressure or normal?How about the sealing performance of the water filter? Does the filter element need to be replaced?Is the recoil system piping (metal pipe, ceramic filter plate, connecting pipe, etc.) broken, leaking or dripping?Is the distributor valve properly installed and is it worn?Are there any cracks in the ceramic filter plate?Is the pressure gauge broken?The most likely reason is 1, 2, two, the best water should not be too dirty, filter should be replaced regularly. I hope the answer can help you.
- Q: The vacuum of ceramic filter is not enough
- Maybe the vacuum meter is broken. It doesn't show or show the data is different from the actual data.It could be the source of the vacuum, the vacuum pump failure.Pipeline leakage: vacuum system connecting pipes (metal pipes or rubber pipes) corrosion, aging and water leakage.Distributor head leakage: wear or poor sealing.Leakage of ceramic plate: rupture of ceramic plate.Other reasons.
- Q: Beneficiation ceramic filter no problem, the technical parameters are normal, but filter out the concentrate water suddenly excessive, what is the reason?
- The ceramic filter ceramic plate ceramic microporous pumping vacuum adsorption concentrate filtration water, the adsorption parameters according to the angle of rotation, reverse cleaning process, check whether there are loopholes in the exhaust pipe, check the ceramic plate use cycle is too long.
- Q: What is the reason that the whole ceramic filter does not attract ore?
- After the joint cleaning, 0~2 hours of suction effect may be good, 2~4 may drop slightly, 4 hours later will become worse and worse, or even suck. This case should first check the backwash water pressure (instantaneous maximum pressure should not be less than 0.08MPa) is to meet the requirements, should also advance down (to ensure normal and ultrasonic cleaning combined with nitric acid dosage sufficient) and prolong the cleaning time.
- Q: How to determine the quality of ceramic fiber filter board simply?
- Ceramic fiber board quality can be judged from the following aspects:1, appearance. The surface is flat and the cutting surface is well arranged, and vice versa.2 density. Press the hands, and the surface is soft and smooth.3, process. Vacuum suction and continuous production process.4, cross section, slag ball content is low.
Send your message to us
Ceramic Filter Plate - Ceramic Fiber Paper with Good Price
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
