Q:Why is there no direct relationship between thermal conductivity and conductivity of ceramics?

The advanced production technology enables the fiber to distribute very evenly, and the paper thickness and bulk density can also be strictly controlled. Ceramic fibers have very low thermal conductivity. The thermal conductivity of ceramic fiber paper was measured by thermal flow method.

Q:What's the difference between ceramic fiber paper gasket and ceramic fiber gasket?

Density: ceramic fiber paper gasket HLGX-200DP and ceramic fiber cloth pad HLGX-500DP, the difference is different: the density of the ceramic fiber paper gasket density of 200Kg/m ceramic fiber cloth pad fand, density 500Kg/m fand around.

Q:Which is the best insulation effect of ceramic fiber paper and XPE insulation film?

The insulation effect depends on the temperature. The same material, the temperature is different, thermal conductivity is not the same. At low temperatures, I suggest you use XPE. Ceramic fiber paper is generally used for hundreds of degrees or even thousands of degrees of high temperature.

Q:Where is the best packing area for ceramic fibers?

Compared with asbestos textiles, ceramic fiber textiles have the following advantages:1) the continuous use temperature can reach 1000 DEG C, and the service temperature can reach 1260 DEG C for a short time.2) has good acid and alkali corrosion resistance and aluminum, zinc and other molten metal melting ability.3) good high temperature strength and heat insulation performance (refer to physical and chemical indexes).4) ceramic fiber cloth, band, packing and other products with non alkali glass fiber yarn as strengthening material have higher insulation and high temperature electrical insulation than glass fiber.5) non-toxic, harmless and odorless.

Q:What is the essential difference between the standard of ceramic fiber and ordinary aluminium silicate?

However, insulating bricks and refractory fibers can not be abused at will. So far as the basic oxygen furnace, cement rotary kiln lining, due to the high temperature chemical erosion, temporarily cannot be used for lining fiber. Ceramic fiber products (aluminum silicate fiber products) for continuous heating equipment such as ceramic tunnel kiln, has already achieved by ceramic fiber products (aluminum silicate fiber products) for continuous heating equipment lining, according to relevant reports, quickly push board kiln and tunnel kiln in the energy saving effect of fire resistant ceramic fibers are very significant. In particular, ultra high temperature heating, such as burning temperature in 1538 to 1649 degrees of furnace, the use of refractory fiber energy saving effect is best. Ceramic fiber products (aluminum silicate fiber products) at present, Europe and the United States and Japan all ceramic kiln equipment using ceramic fiber products (aluminum silicate fiber products) lining. Not long ago, Japan will be decomposed into compartments such as gas tunnel kiln structure, and then to the segmented manufacturing factory construction site assembly, all of this is due to the use of ceramic fiber material, greatly saves the cost of more convenient because of the kiln. The research on energy saving effect of ceramic fiber products is also being carried out from the aspects of material modification. Ceramic fiber products (aluminium silicate fiber products)

Q:Is the slag ball of the ceramic fiber useful?

Slag balls are basically useless, just like raw ore.

Q:What fiber glass made of ceramic fiber paper?

Ceramic fiber paper production process is:Beat out - pulp - pulp - long mesh forming - vacuum dehydration - drying - cutting - winding - packaging

Q:Is everybody ceramic fiber cotton poisonous?

Depends on the production process is the above kind, the province may not, but the production process may have some problems.

Q:The difference between ceramic fiber cloth and ceramic fiber paper?

Two ceramic fiber paper and ceramic fiber cloth are refractory insulation materials, both can be used for insulation and heat preservation

Q:How high is the temperature resistance of the ceramic fiber gasket?

Generally divided into standard type and high profile, the standard temperature of 1260 degrees to 1000 degrees of long-term use of high alumina long-term use of 1200 degrees.