Aluminium-plastic Panel with high quality pangyuhe skill fight

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
123123 kg/m²
Supply Capability:
500000 kg/m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction

Introduction of Fiberglass Geogrid:

Fiberglass geogrid is based on fiberglass woven cloth coated with modified bitumen or PVC, it was developed to address the problem of pavement cracking on highways, roads and runways, driven by a need to reduce cost for infrastructure maintenance and repair.

It is characterized by high tensile strength in axial and lateral directions, low stretch rate, alkali-resistance, low temperature- resistance, as well as convenience in construction and low price. It can be used on pitch pavement to prevent cracks and prolong pavement service life. It also can be used as a basal reinforcement material for hillsides, reservoirs, harbors, ports, water channels, seawalls, etc.

 

Proformance

Proformance of Fiberglass Geogrid

--- High strength, low enlongation

---Heat-resistant, high modulus

---Light weight, good flexibility

---Anti-erosion, long lifetime

---High modulus, low temperatures resistance

 

Applications

Applications of Fiberglass Geogrid

--- Reinforcement for road pavement

--- Reinforcement for railway basement

--- Reinforcement for Tunnel

--- Reinforcement for Slope

--- Reinforcement for embankment

---Soft soil reinforcement, improve road whole bearing capacity and prevent crack

Specifications

 Specifications of Fiberglass Geogrid
 

 

Tensile Strength (KN)

Warp

>30

>50

>60

>80

>100

>120

>150

>200

Weft

>30

>50

>60

>80

>100

>120

>150

>120

Elongation(%)

<4< span="">

<4< span="">

<4< span="">

<4< span="">

<4< span="">

<4< span="">

<4< span="">

<4< span="">

Mesh Size(mm)

25.4*25.4

25.4*25.4

25.4*25.4

25.4*25.4

25.4*25.4

25.4*25.4

25.4*25.4

25.4*25.4

Elastic Modulus

76

76

76

76

76

76

76

76

Width(m)

1~6

1~6

1~6

1~6

1~6

1~6

1~6

1~6

Length(m)

50~300

50~300

50~300

50~300

50~300

50~300

50~300

50~300

Temperature Resistant(℃)

-100~280

-100~280

-100~280

-100~280

-100~280

-100~280

-100~280

-100~280

Resin Content (%)

18~20

18~20

18~20

18~20

18~20

18~20

18~20

18~20

Glue Type

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

Bitumen PVC  SBR soakage

 

FAQ

·         How about the delivery time of Fiberglass Geogrid?

·         2~4 weeks.

·         Can you produce Fiberglass Geogrid according to customers' requirements ? 

·          We are professional manufacturer of fiberglass geogrid, OEM and ODM are both welcomed.

·         Can you offer samples of Fiberglass Geogrid ?

·         Yes, we can offer samples of fiberglass geogrid free of charge before order for testing quality.

·         How about your Fiberglass Geogrid quality?

·         We are state company, with ISO certification. The fiberglass geogrid prodcuts are with the best quality. We can meet Europe standard, American standard, Chinese standards and so on. We can also manufacture products according to your requirement on quality. 

·         How about your service of Fiberglass Geogrid ?

·         We promise to reply all customers requirement on fiberglass geogrid within 5 hours. 

·         We have warehouse in Russia, Ukraine, USA,  Germany, UAE, India, Vietnam,Indonisia,  Brazil, Chile. We provide all kinds of service, including after-sales service, storage service.

 

Photos

 

Aluminium-plastic Panel with high quality pangyuhe skill fight

Aluminium-plastic Panel with high quality pangyuhe skill fight

Aluminium-plastic Panel with high quality pangyuhe skill fight

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to do the inspection data of the geogrid? What are some of the specifications
Lower bearing layer smoothness
Q:What criteria should be used in the construction of Geogrid
1, the construction site: requirements compaction flat, horizontal, removal of the protrusion. 2, in the formation of compaction: Geogrid laying site, installation of the grid the main stress direction (longitudinal) should be perpendicular to the axis of the embankment, laying should be smooth, no wrinkles, as far as possible tension. With the plug pin and the earth pressure is fixed, the laying of the grille main stress direction is best long without joint connection between the amplitude and the amplitude of the manual banding lap, lap width not less than 10cm. If the grid is set above two layers, the seam should be staggered. After laying a large area, the overall adjustment of its flatness. When the cover of a layer of soil, not rolling before, should be used manually or machine tensioning grid, the strength should be uniform, so that the grid in the soil for the tension state. 3, the choice of packing: packing should be selected according to the design requirements. Practice has proved that, in addition to frozen soil, swamp soil, domestic waste, chalk, diatomite can be used as filler. However, the mechanical properties of gravelly soil and sandy soil are stable, and the water content is very small. Packing size should not be greater than 15cm, and pay attention to control the packing gradation, to ensure the compaction weight. 4, the packing of the paving and compaction: when the laying of the grid positioning, should be filled in a timely manner, the exposure time shall not exceed 48 hours, can also take the side of the laying of the backfill flow shop. First spread the filler at both ends, the grid will be fixed, and then to the central propulsion. Rolling sequence is the first two sides after the middle. When the roller compaction can not directly contact with the reinforced material, the non compacted reinforcement generally do not allow the vehicle to travel on the above, so as to avoid the dislocation. The degree of compaction is 20-30cm. Pressure...
Q:How to determine the number of geogrid detection method
What are the geogrid testing items1) place: in the surface layer of 50cm thick sand gravel or sand (egg) gravel cushion, and compaction, which is not only conducive to improve the friction between the soil and the grid, but also conducive to the consolidation of the foundation drainage.
Q:How to effectively control the quality of Geogrid in the process of construction
3 when laying geosynthetics, the direction of high strength should be placed in the main stress direction of the embankment.4 geosynthetic materials should be paved after the design requirements of the back section, and timely coverage with sand.5 rolling and transportation equipment, such as rolling or walking directly on geosynthetics.6 the width of the lap and anchor meet the requirements.7 of the original land drainage should be formed 4% of the crown.8 shop geosynthetics are hidden works, the construction process should have the quality control personnel on-site monitoring and do a good job of hidden engineering inspection records, report to the supervisor can be recognized for the next construction process.
Q:The cheapest two-way plastic geogrid manufacturers, two-way plastic geogrid prices?
Its elongation rate is only 10% ~ ~ of the original plate of 15%. If the carbon black and other anti-aging materials are added in the geogrid, the utility model has the advantages of good acid resistance, alkali resistance, corrosion resistance, aging resistance and the like.
Q:How to apply the fixed scale of Geogrid
Remove the geogrid as long as you take the reinforcement of things, such as U type nails, packing belt, gasket, steel nails and other reinforcement, and then roll up on it.
Q:What does the geotextile 200# mean?
200 grams, the unit is g/ square meters per square metre, representing the weight of Geotextiles
Q:What way to quickly cut the geogrid
3, one-way geogrid for reinforcing the dam and road slope and retaining wall: the traditional embankment especially filling high embankment filling and often need to shoulder edge easy compaction, resulting in slope rainwater invasion, collapse phenomenon, at the same time with a gentle slope, covers an area of large, retaining wall have the same problem with Geogrid embankment slope or retaining wall reinforcement can be reduced by two points a area, prolong service life, reduce the cost of 20 - 50%.4, one-way geogrid to reinforce the River seawall: made of stone cage, with the grid and use, prevent the dam washed collapse, stone cage is permeable and can reduce the impact of the waves, prolong the life of the dam, save manpower, shorten the construction period.
Q:Is it possible to add fiberglass grille between asphalt pavement and asphalt pavement
If you want to be perfect, it is best to shop floor grille
Q:What are the specifications of the geogrid
Four kinds of glass fiber geogrid and polyester warp knitted polyester geogrid.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range