Air Vent Valve on Hot Sale from China with High Quality Now
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:G what's the meaning of the valve?
- Valve with other function or with other special mechanism, fill in a Chinese language before the valve type code number
- Q:HH valve company in the United Kingdom, how about the valve?
- Our factory boiler has this brand of valve, used for many years, has been no problem, really good.
- Q:How to check if the gas valve is open?
- Method 1: gas valve has a handle, the handle is parallel to the pipe, that is open, vertical is closed. If there is no handle, there is a rectangular main handle on the valve, the handle is parallel to the pipe, that is, the open state, vertical is closed.Method two: the valve handle and pipe to "one" word proved to come, into "ten" word is off. Also, turn the handle clockwise and turn counterclockwise.
- Q:the use of natural connections, is strictly prohibited counterparts. What do you mean by "strong opposition"?
- Strength of the corresponding meaning is: the valve used to connect the original way of normal connection, such as silk mouth with the same specifications of the silk mouth connection. You can't connect the wires with different sizes.The pipe clamp is fixed in the counterpart application, from the interface at 200mm was measured with a ruler, when the nominal diameter is less than 100mm, the tolerance of sigma <1mm, when the nominal diameter is greater than 100mm, tolerance for a <2mm, but the length of tolerance is less than 10mm, no strong counterpart or eccentric pad counterpart.
- Q:What do O and S mean on the valve?
- Generally used in process valves, operating conditions required to open and close, especially in the case of pneumatic actuators installed, the loss of power and gas supply valve when the state
- Q:Symbols for all types of valves
- In addition to the throttle valve (L) valve (H) valve (U) valve (Y) of the four types of valves, the other is according to the first letter of the easy to remember the four valve but also second word the first letter and the other valve is repeated with the first letter of a very good record I was just valve knowledge I hope to help you!
- Q:Can the angle valve of York central air conditioner be replaced by other valves?
- Definitely. But I want you to tell me what you're doing, or give me a picture. I can give you some advice
- Q:1) the valve plate, valve gate valve, the difference (my personal understanding is that if it is on the ball, called the valve, if the valve is called the gate, is actually a meaning in different valve called, please help me understand it right?)2) valve clack. What's the spool?3) the valve seat is welded inside the valve, or is it directly installed inside without welding?4) when opening the valve, if the valve seat is not welded, then, under the pressure of the medium, why not open the seat?.5) excuse me, pressure self sealing (my personal understanding is that when the valve is closed, the valve plate and valve seat depend on the pressure of the media, and they fit together to seal the effect
- The first question is basically the same, and you can understand that for the secondThe 3,4 problem, there are several seat connections, such as thread connection (threaded, the valve seat is connected with the valve), modular connection (such as adding the cage to a fixed seat, the crushed) as one of the body and there is (some welding). The valve seat must be fixed.The fifth question, you are right!
- Q:How big valves are used in the DN90 pipeline?
- If you use a 97 tube, the inner diameter of 89- phi 90., nominal pressure is low, then try to use DN80, DN80 valve diameter of 80, you can try butt welding
- Q:What valve is the DN 25?
- That is, the inner diameter of the valve is 25 millimeters
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Vent Valve on Hot Sale from China with High Quality Now
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords