230V 27 Smd 5050 120Degree Aluminum Spotlight 4W Led Lamp E14

Ref Price:
$1.30 - 1.90 / pc
Loading Port:
Shanghai
Payment Terms:
L/C,T/T
Min Order Qty:
1 Piece pc
Supply Capability:
220,000 Pieces Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

PART NO.

CME14-5027A

Housing MetalAluminum with cover
Demension(D×H)mmΦ50×65mm
Input voltage230V AC
Wattage4W
Beam angle120°
LEDQuantity27
Stype5050
Luminous Flux380LM
Luminous Flux(Lm)380Lm
Replace Halogen lamp40W
Colour rendering index(Ra)80
Colour temperature(K)3000K / 6000K
Average Lifetime(Hr)>40000Hr
PackageQuantity250PCS
Gross weight14Kg
Size53×36×28cm

Feature:

12V 230V 27 SMD 5050 120degree Aluminum Spotlight 4W LED Lamp E14

 1. LED Light Feature:

A. Lifespan: more than 40,000hr;

B. Indoor lighting for domestic using;

C. Fast light brighting,no dely and flicker;

D. Energy-saving: saving 80% than the ordinary lamp;

E. Green and health protection,no pollutio,more comfortable for our vision.

 

Product Advantages:

A. Passed EMC,LVD and ROHS certification;

B. Environment-friendly and no UV or IR radiation;

C. Wide range of available operating voltage and low consumption;

D. Easy to install and maintain,replacement of traditional bulbs and no subsidiary fixture.

 

Application Area:

A. Basic commercial lighting;

B. Generally matching in downlight, celling light, household lighting etc;

C. Shopping, lighting, specialty lighting, hotel lighting, office lighting, home light;

D. Commercial show windows and bars, airport, subway, cloverleaf junction and architecture field.

 

Our Service:

A. Your inquiry related to our products or prices will be replied in 24hours;

B. Protection of your sales area, ideas of design and all your private information;

C. Well-trained and experienced staffs to answer all your enquires in fluent English;

D. Distributoership are offered for your unique design and some our current models;

E. OEM&ODM, any your customized lightings we can help you to design and put into product.

 

Cautions:

A. Non-dimmable;

B. Indoor use only;

C. Switch off the power before replacing lamp;

D. Keep away from direct sunshine and high temperature;

E. If any doubt about installation or use of this product consult competent electrical.

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference between LED to shoot the light and PAR light
LED lamp is to use leds as a light source to shoot the light. Traditional lamp used more halogen lamp, luminous efficiency is lower, more power consumption and environment temperature rise by illuminate, service life is short. LED light source on the luminous principle, energy-saving, environmental protection level are much better than traditional lighting lamps and lanterns. And LED the unidirectional formed to shoot the light distribution of the perfect support. PAR lights (Parabolic Aluminum Reflector light), which is also called, canister light, its structure is also useful in specular light bulbs installed in the cylinder reflective bowl of bromine tungsten bubble, main feature is that penetrate the fixed beam, beam Angle width of light spot size can adjust
Q:Led bulb light beam width led ball steep light Angle is usually?
These lights in addition to the LED fluorescent lamp is 1 wled do, you will find your LED lamps and lanterns of parameter has its light Angle, generally is 160 degrees, one is 160 degrees, 10 or 160 degrees, what do you say? And the LED fluorescent lamp is made of 3528 LED, the light Angle is greater than 120 degrees
Q:A dim light LED shoot the lamp to disconnect the zero line
LED lamp belongs to low pressure constant current electric equipment, want to use the power adapter when ac 220 v power supply to drive. Now the high frequency switch power supply, LED power supply is almost working frequency is controlled in 100 KHZ, input and output impedance is very high, start up easily. When turn on the fire didn't answer the zero line, power shell or internal circuit board is exposed to air, larger area to form a minor loop and outward radiation energy, cause the power weak vibration, low output voltage. This phenomenon is not obvious when the air is dry. Therefore, in order to use electricity safety and environmental protection, use LED lamps and lanterns is best according to the standard connection, namely switch must control the fire. Of course, there are still many LED lights manufacturer in order to reduce costs, using a simple capacitor step-down type power supply for the LED power supply. Because the source is a capacitive load, even after the switch wire through line can the distributed capacitance between the conduction small current, lead to LED lights dim.
Q:The LED lamp and built-in ballast which good
LED to shoot the light is better than with ballast lamp. LED to shoot the light small power consumption, high brightness, long life, less heat, its driver USES the way ChengHeng current source power supply switch power supply, small volume, high efficiency, low noise, is a new energy-saving products. And built-in ballast product, are generally not fluorescent lamp, most use inductive ballast (now also has a switch power is applied to make ballast, but the volume is bigger than the LED constant current source), ballast itself than switch power supply, power consumption is easy to produce power supply hum. Lights glowing on the filament heating, heat.
Q:Led lamp have drive, don't drive, what's the difference?
Don't have to drive LED lamps and lanterns, the choice of the LED will be similar to Seoul, South Korea, 220 v LED semiconductor, there is no drive LED lamps and lanterns is non-conforming
Q:Led lamp power consumption how much every day
Power consumption calculation: 1 hour because 1 kw is 1 degree, if according to the 5 w, 10 hours, computational method is, 0.005 kw x = 0.05 degrees, 10 hours a month (30 days) power consumption is 1.5 degrees.
Q:What kinds of leds are included?
LED to shoot the light is roughly including LED lamp cup, LED ceiling lamp, LED downlight etc, PAR lamps and the LED lamp, LED bulb is not big. Because the lamps and lanterns of LED lamp is refers to the condenser, and the ball bubble lamp is glistening divergence. Former friends right!
Q:What happens if the LED lights are on the L and N
Will be bright, this is not a motor without inversion, as long as you don't take the line of fire and zero line to a can!
Q:LED lamp is negative would pick up the light damage?
Of course. Especially the constant current drive leds. General LED reverse and pressure is not high.
Q:Led to shoot the light is broken how to change
Now turn off the lights switch (for safety) had better be to turn off the total power supply, and then into the drive power line (also can be directly cut short), then remove the bad driver And then put the new drive power input skin, two light thread dial the skin. Let one of the root drive power cord wrapped around the lamp power cord (chaozhou both positive and negative), on the one of tie up good, good electrical tape, another root connection same good tangle on electrical tape.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range