Product Description:
13w LED Corn Light with Patent Certification
Advantage of LED Light:
●Pretty appearance as quality
●More than 80% energy-saving
● Long lifespan(50, 000H)
● Fashion design and different types
● Easy to install and use
●RoHS, and CE approved
●No risk of mercury emission, environmental protection
Application of LED Light:
●Residential Buildings, Home
●Office, Meeting Room
●School, Library
●Factory, Warehouse
●Hotel, Casino
●Parking Garage
●Hospital
●Commercial Center
●Supermarket, Shopping mall,anywhere you want
Main Features of the LED Light
Part number | Dome/s107D | Dome/s109D | Dome/s111D |
|
Description | LED PL CORN TUBE(PLC), AC85~265V input voltage, 360° view angle |
Materials | AL body,G24D/G24Q/GX23-2/G23-2/E27/E26/B22 base(180° rotatable) |
Light source | Taiwan A class chip; 2835 SMD LED; light efficiency:133lm/w; CCT:2700K~7000K available; CRI: >80 |
Basic size | C41×124(L) mm | C41×134(L) mm | C41×144(L) mm |
|
LED quantity | 54pcs | 63pcs | 72pcs |
|
Power (PD) | 7.5W | 9.5W | 11.5W |
|
Luminous flux | 600~680Lm | 800~850Lm | 950~1100Lm |
|
Remarks | MOQ:50pcs, Warranty:3 years, Package:white box |
Stucture of the block
| power | LED Qty | size | Luminous Flux |
| 3w 3U | 36pcs SMD3014 | 40*116mm | 272lm |
| 3w 2U | 16pcs SMD2835 | 40*116mm | 272lm |
| 5w 3U | 48pcs SMD3014 | 42*135mm | 388lm |
| 5w 3U | 24pcs SMD2835 | 42*135mm | 388lm |
| 7w 3U | 72pcs SMD3014 | 42*150mm | 576lm |
| 7w 3U | 36pcs SMD2835 | 42*150mm | 576lm |
| 9w 3U | 96pcs SMD3014 | 50*150mm | 897lm |
| 9w 3U | 48pcs SMD2835 | 50*150mm | 897lm |
| 12w 3U | 120pcs SMD3014 | 52*175mm | 1138lm |
| 12w 3U | 60pcs SMD2835 | 52*175mm | 1138lm |
| 16w 4U | 160pcs SMD3014 | 60*1184mm | 1790lm |
| 16w 4U | 80pcs SMD2835 | 60*1184mm | 1790lm |
| 24w 4U | 240pcs SMD3014 | 75*250mm | 2050lm |
| 24w 4U | 120pcs SMD2835 | 75*250mm | 2050lm |
| 30w 4U | 300pcs SMD3014 |
| 2900lm |
| 36w 4U | 180pcs SMD2835 |
| 3000lm |
PACKAGE:
Delivery:
1.Sample lead time:3 working days once we comfirm the order or recieved payment.
2.Minimum order:MOQ is 50pcs per item.
3.Packing:Routine standard package.All moulding and tooling charges for customers'special packaging will be on customer's account.
- Q:Why can't the voice switch control the time of the LED bulb?
- The power of LED bulb is much less than that of incandescent lamp, and the control loop and light bulb of simple sound control lamp are connected in series, and the load is different and the time delay is different
- Q:LED what is the glue between the aluminum base of the bulb and the cooling aluminum?
- A lot of sticky glue can live it yourself have not tried to guess 502 good brothers of this kind of glue can be, but do not know good heat resistance and high power LED heat is still very large, if you are a small power never mind
- Q:LED what are the bulb screws?
- LED bulb lights are E14, E27, E40, B22. The most common family is E27, also known as big headed screw. There are also some lamps, E14, called small headed screw. These two are the most common energy-saving light interface. Before there are B22, that is, the kind of card, also known as bayonet. It may be common in the countryside, but now it has been phased out. There are some industrial use of more E40, more than 80W energy saving lamps will be used, that is, the interface is relatively thick.
- Q:Will the power of the LED bulb grow longer and longer? Why?
- Could you tell me the measurement method? - how about the side current and voltage? Or, whether direct measurement of active power under mains power supply?Also, can you tell me the circuit of LED bulb? DC power supply or AC power supply? Constant current module drive or RC current limiter? If the power supply is 12 volts low, is the resistor only current limiting?I feel something doesn't make sense......In one case, the longer the duration of the LED bulb, the greater the power:In some advanced LED bulb bulbs, an anti impact "slow start" circuit is added to the design, and a NTC (negative temperature coefficient) resistor is incorporated into the LED power supply circuit.Because of the larger resistance of NTC in cold state, the current of LED is smaller and the power is relatively small;With the use of electricity LED bulbs, NTC resistance temperature gradually increased, the resistance is reduced, the current of LED is also increased, so the power LED bulb also increases, temperature stability, until NTC resistance unchanged so far.
- Q:What's the difference between a glass cap for a bulb and a PC hood?
- Weight comparisonPC specific gravity 1.2,The proportion of glass (usually glass) is 2.5,That is to say, PC is lighter in weight than glass.
- Q:Where can LED bulb be used?
- LED bulb is a new type of energy saving lamp to replace traditional incandescent bulb. The traditional incandescent lamp (lamp) of high energy consumption, short service life, in the global resource environment, has been gradually by governments to ban the production, instead is the product of electronic energy-saving lamp, electronic energy-saving lamp while improving the energy saving effect, but because of heavy metals using a lot of pollution of the environment, trend against the environment protection.
- Q:What are the requirements of the LED series inspection specification for bulb bulbs?
- The temperature rise of the finished lamp is not more than 120K. The temperature rise is equivalent to the maximum value of 60W incandescent lamp.
- Q:What brand of LED bulb is good in quality?
- View brightness. Incandescent lamps usually only talk about wattage instead of lumens, but LED bulbs can count in watts, but wattage does not represent the number of lumens due to the continuous development of LED's luminous efficiency.
- Q:60W how many lumens and how many W LED bulb does incandescent bulb replace?
- General household enough, if in 10 square meters of housing, installation of more than 10W LED lights, brightness is too good, if not the study, it is best not to.
- Q:LED bulb w can replace 40W incandescent lamp
- D lamp lumen value is ordinary incandescent lamp about 3 times, but LED ball bubble mask transmittance should be based on material, can use 10W or so LED acrylic mask ball bubble instead. Because I received a similar customer complaint, 7W's LED light bulb was replaced with an 20W energy-saving lamp, which was not bright enough.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
