100W LED Corn Light

Ref Price:
Loading Port:
Shenzhen
Payment Terms:
L/C,T/T
Min Order Qty:
10 Pcs pc
Supply Capability:
100000 Pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

‍Led warehouse:
1.Luminous flux:13000lm
2.Replacing 300W CFL
3.Offering 3 years warranty
4.CE&Rohs

 

Product Name:  100W LED warehouse replacing 300w CFL, 100W LED Warehouese light

 

Specification:

1.Input Voltage: AC100-300V

 

2.Power Consumption: 100±10%W

 

3.Power Factor: 0.97(110V),0.94(220V),0.9(277V)

 

4.Frequency Scope: 50/60HZ

 

5.Operating Temp.: -20-40degree

 

6.Socket Type: E40,E27,E39

 

7.Beam Angle: 360degree

 

8. LifeSpan: >50,000hrs

 

9.LED Quantity: 1652pcs

 

10.Color Temp.: Cool White (6000k),Neutral White (4000k) ,

 

Warm White (3000k)

 

11.Luminous Flux: 13000lm (6000k),12500lm(4000k),12100lm(3000k)

 

12.3 years warranty

 

Features & Advantages:

1.Our new designed 80W LED corn light can replace high power conventional lamps like Metal halides,CFLs, Mercury lamps and HPS.

 

2. We use Internal Aluminum alloy heat sink and Fan to cool the lamp, Also we designed a  Board between the Driver and leds to stop the heat produced by LEDs from going to the LEDdriver.

 

3.Adopting high temperature-resistance LED Driver.We cooperate with good driver manufacturer and manufacture the good quality LED  Drivers for Our Corn light series. Stably work and will not burn out easily.

 

4. Using LED Corn light instead of metal halide,CFL,Mercury vapourwill help cusomters save energy 

 

consumption and cut the electricity bills,meanwhile add more electrical power needed for others like air-conditioning.

 

5.Safety :  LED warehouse light operatee at much lower temperatures and generate very little heat. Incandescent,metal halide and CFL are hot enough to cause fire,and they frequently do.

 

6.Long Lifetime: 50000hours.

  

Application

Our led corn lights are applid in office,warehouse,supermarket,schools ,colleage and so on.

  

Package:

 

12pcs/ctn

 

Ctn Size: L350*W135*H135

 

G.W.:15.2KG.

 

Size of 100W LED warehouse:

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the principle used in SMD LED lamp, should pay attention to what the problem?
LED white is the light emitting diode, a PN junction to the most important use of SMD beads is the heat, according to the different manufacturer beads, glue package is not the same, should pay attention to pre baking time and temperature, the latter should pay attention to the patch temperature, the most important is the price, many manufacturers in order to cost savings, internal chip used is too small does not meet the standards, support steal frugal material, with iron, the failure cycle shortened, LED lamp can not reach the ideal effect. Again, the LED supply current must not exceed the rated value, which is an important factor in damage to lamps and lanterns
Q:What is the rated current for the white patch LED?
LED high power and low power, small white rated current and LED wafer, such as a chip is 20MA two 40MA.... High power 0.5W, 100-150MA, 1W, 350MA current rating in the relevant product specifications
Q:How many volts is a single LED on the LED patch band?
The single LED on the LED patch band is around 3.3V.LED light emitting diode, which is a nonlinear component, its operating voltage (tube pressure drop) is also different: ordinary red LED about 1.5 V; ordinary green LED about 1.8 V; bright white LED up to 3.3 V or so.
Q:What does "1210" mean in patch LED?
1210 represents the size of the LED package specification (size, specification), and represents the length and width of the resistanceSpeed adoption!!!
Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
Packaging is for TOP series LED, that is, the type of plastic molding. The patch is based on the PCB circuit board for molding. Mold release agent is used in molding.
Q:Notes on patch LED
Clean, do not use an unknown chemical liquid to clean the patch LED: an unknown chemical liquid may damage the patch LED. When necessary, immerse the patch LED in alcohol, less than 1 minutes at normal room temperature, and dry naturally for 15 minutes before starting to use
Q:How do led patches measure good or bad?
Use the two stage tube test of the multimeter, the red pen is connected, and the black pen is negative. If there is a bee, the sound is bad, and if the light is bright, it is good
Q:What are the storage requirements of SMT patch LED (LED)?
Keep in storage- the original sealing bag packing in the condition of the <40 C and <90% RH degrees for 12 months, more than the storage period will bake.Please check the leak before opening the packing bagIn opening the sealed bag, should be placed in SMD LED and C 60%RH. < < 30 degrees under the conditions in the above conditions, SMD LED must be in the open package using reflow within 24 hours. If placed more than 24 hours, you need to bake- baked, SMD LED in C + 80 degrees 5 degrees C and <=10%RH relative humidity in the oven for 24 hours• remove the pouch before baking, and do not open the oven door frequently
Q:Patch LED manual welding, how can welding not burn lights?
First of all, welding LED and other electronic products with line electrostatic ring, to prevent static light.When welding the patch LED lamp, first add the tin on the pad of the lamp board, then clamp the LED patch lamp with tweezers. Then, the soldering iron will melt the tin of the solder plate of your lamp board, and then push the LED lamp onto the pad with tweezers. The whole welding process should not exceed 5 seconds, otherwise it will burn the lamp easily.
Q:How does the LED patch lamp differentiate between positive and negative poles?
You can also use the ohmmeter's ohmmeter. To dial multimeter, to "ohm X1" file, the light emitting diode when the red pen is connected to the positive terminal of SMD LED, the black probe is connected to the negative terminal of SMD LED.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range