Q:Bathroom shower room installation, has been waterproof, and not shop tiles, is not this time buried stone base?

Stone processing: for the corner of the cylinder and can not be installed in the basin can be used as a stone-based water treatment, stone foundation can be embedded, embedded in the wall and the ground 1-2 cm, can also be paved the ground and then loaded stone Base, and then the shower room can be installed in the above, but please note that when the custom shower room to reduce the embedded part of the wall, stone-based artificial stone and real stone points. Direct use of the ground brick shower pockets: according to the size of the pockets provided, the pond surface is less than 2 cm on the ground floor, floor drain with stainless steel pieces, the overall effect is better and can avoid the wall, the cost is low.

Q:Is there a shower room in the countryside?

As long as the bathroom space conditions permit, can be used

Q:In a small house corner to do a simple shower room, if the wall, then also posted tiles, trouble and high cost. I would like to enclose a rectangular shape, can be installed on a door, I would like to ask what materials are cheaper and easy to use, making it convenient! Best, around, the top, the door can use the same material, it is more trouble!

Aluminum alloy with frosted glass, the top directly with aluminum plate or pvc buckle board to catch on the line

Q:Because the top of a window is only about 80 cm, I was wrong to do the partition

What is the relationship between the size of a shower room it; to solve the life must be the main, do not have to consider other too much. Want to cut off the course of course more simple, relatively thin glass, in addition to the root, as long as the above can be separated from the sight of the purpose of the line can be. Please consult the site staff will not have too much problem.

Q:Shower room glass glue mold point how to remove?

You can use a hot cloth to wash away the detergent, and then use alcohol disinfection. To remove many of the methods, you can try the following: 1, with soap plus a little ammonia and turpentine mixture, you can remove many dirt 2, with a good sticky transparent glue repeatedly tear, you can remove some of the surface 3, with a little bit of sodium water to wipe off, or paint thinner can also be. 4, you can use hair dryer dry, and then gently scraping on it 5, wipe with a cotton swab dipped in water. 6, wind oil fine wipe. 7, use a special cleaning agent or sports shoes to remove the cream wipe. 8, with the drawing with the 4b rubber is very soft that kind of Korean rubber can erase it. 9, if it is a long trace of traces have been hardened, you can use a hot towel to get it soft and then rub.

Q:Which brand of shower is better?

Vancouver shower room, my home with eighty-nine years. Did not encounter any problems! High quality, trustworthy!

Q:What is the main choice of the shower room? Is it good for the Furui shower room?

Obviously, this is the manufacturers of vicious competition again carnival, my family Furui shower room with 5 years feeling very durable!

Q:Home to install the shower room, to the building materials market saw several brands. As if there are many kinds of glass selection, there are Yaohua Yaohua, in the end what kind of good point. Feeling shower room square price gap is very large. There is no home has been installed under the guidance of people, what is the difference?

Now generally do the steel, the choice of space is not, due to repeated push and pull, it is recommended to pay attention to the shower room accessories shower room pulley quality.

Q:Shower how to install ah, mainly asked how to set up hot and cold water pipe joints ah

1. The first step should be for the installation of the basin. For the installation of the basin, it is important that the water in the bottom basin is very important. If you keep the water, then the installation will have a great impact. At the same time the bottom basin and pipe connection, pay attention to solid, to prevent water leakage. Hose, you can adjust the distance as needed. 2. Use water to check to ensure the accuracy of the installation, and to ensure that the water can flow normally. And then followed by the drilling operation, used to fix the wall of the aluminum material. 3. Then into the fixed particles and other ingredients, and then the aluminum bar is fixed above the wall, and then will be used to fix the glass material in the bottom basin drilling place. 4. Drill a hole in the fixed glass, then install the mount, and then connect the jacking. Then it is for the installation of the shelves. We know that the shower room if you do not put the shelf, then go into the bath when the replacement of clothing is not good to put. 5. Install the activities of the door, you can save space, and push and pull will be more convenient. Then do good waterproof work between the glass. With glass glue to seal the need to seal the place is also sealed. 6. Then for the installation of the shower room to check, to ensure that the installation of the shower room waterproof normal, smooth drainage, can be used normally. If there is a certain lack of water and drainage, pay attention to the renovation, while the screw and the like to tighten out. And then remember to wipe the shower room with a rag.

Q:What is the fixed shower in the bathroom? There is the shower between the glass and the glass between the fixed, glass and the ground is a fixed stone?

Retaining the water can be buried with cement ------ is posted in the bathroom when the floor buried in the place you want to install, retaining the groove inside the groove to fill the cement. Between glass and glass, there is a professional hinge or stainless steel connection between the connectors that require a suitable angle between the sealing strips. The fixing between the glass and the ground or the retaining strip can be fixed with a special anti-mildew glass glue.