Q:Which mobile shear fork lift is better

Mobile shear fork lift There are four major systems, The mechanical structure system,

Q:What hydraulic cylinder is used

As long as the hydraulic cylinder reaches the required height.I hope my answer will help you.

Q:The ball of the universal milling and lifting platform rolls off, how to install,

Screw has a variety of forms, one of the most common is to use return and return two catheters, if not nut screw the screw will not drop the ball, if there is no turn the screw nut and fell out of the ball, that is to return or return pipe is broken, have to put on reload. Let me be specific. If there is no damage, then use the lithium base grease to keep the ball rolling in separate loops, and then turn the nut back in the way of the regular nut. The key is to start at the beginning, but once the ball comes out, it's going to come back again. Try it twice. (note the non-circular path (snails) don't let the ball drop!)

Q:The automatic mahjong machine has a lift station always one. What is the other three normal

There are two main reasons for this: In the ascent of the aluminum plate, the interference with the limit mechanism

Q:Description of fixed hydraulic elevator

Main USES: installation maintenance, such as power line, lighting, elevated pipe, etc. Applies to can't work of the excavation pit, USES the chain wheel lift height, with a single break, double break, adopt effective guidance system, make the lifting platform in the process of translation and small gap with fixed bed, smooth operation, stepless speed change. The synchronizing device adopts low speed large torsional drive, which can be completely parallel, freely and retractable in the lifting process. The machine is stable and safe, suitable for the supermarket, hospital, restaurant, shop and so on.

Q:Introduction of vertical elevator milling machine

Milling machine is a kind of widely used universal CNC machine tools, can be processed on milling machine plane (horizontal, vertical plane) and groove (key, T slot, dovetail groove, etc.), the points of tooth parts (gear, spline shaft, wheel), helical surface (screw, screw groove) and various kinds of curved surface. In addition, it can also be used for the surface of the rotating body, the inner hole processing and the cutting. Hope to adopt!

Q:How do you remove the horizontal universal elevator milling cutter

Tie rod and the threaded part of the milling cutter is too short, removing cutter bar back a loose, threaded connections even fewer number of buttons, easily when tapping threads dozen hair, and make the cutter not screw down, or make the damage of tie rod.

Q:What can be done when the hydraulic platform is down?

You can't see your schematic diagram, theoretically do not use hydraulic lock, should balance valve, the frequent switch of hydraulic lock causes jitter and unstable. Shunt valve, speed regulating valve or pressure compensating valve is a common solution to solve synchronization problem. Synchronous diverters are expensive

Q:Safety operation of hydraulic platform

4, rise and fall: press the "rise" button, start the motor, the motor spin, the hydraulic system work, the oil cylinder protruding, the platform rises. Stay up to work the required height, "stop" button, the motor stop lifting platform, can work, if not in accordance with the "stop" button, the platform to calibrate height be 8 meters (native) trip switch, platform in height. At the end of the work, press the "drop" button, the solenoid valve action, when the oil cylinder is turned on, the platform is lowered by itself. During the use of hydraulic platform, it is strictly forbidden to overload (the unit load is 300kg), and the operator on the platform will not be moved during the descent. When moving or traction hydraulic platform, the supporting leg should be collected and the platform will be lowered to the lowest position. 7, when platform malfunction cannot work normally, should be promptly cut off the power supply for repair, it is strictly prohibited to equipment to work, in spite of non-professional workers do not remove the hydraulic components and electrical components. Do not use the machine in an unstable condition on the ground. Please do not raise the platform without the platform, the outside legs are not adjusted, the platform is flat and the ground is unstable.

Q:The design of graduation is designed for mobile shearing and hydraulic lift

Hello, jinan Long Hao hydraulic machinery co., LTD. Is specialized in the production of portable shear fork type hydraulic lift 】 【 high quality manufacturer, jinan Long Hao machinery can also be customized according to customer requirements of various special types of elevator