1.Material : Brass, the cylinder lock made by new material,not recycle material.
2.supply cylinder lock with various kinds of images or according to customers' drawings
3.Min. Quantity: 3,000 sets each model
4.lock cylinder keyway:
a.The size of the cylinder is very precise
b.The product line is very straight,the key cylinder never fade.
c.If the key cylinder drops,It can't be fragile.
d.The surface of the mold is very flat. We pay attention to the specifications.
e.The cylinder is made by brass,from plug,cylinder,shell,no adulteration.
We can accept you to check.
a.defective cylinders, must be a replacement,you can return us for new items for free
b.the logo can design as your request
|Certificate||ISO 9001 (2008 Version)|
|lock pin||5 pin and 6 pin available|
|keys||2 or 3 pcs of brass key|
|packaging||One set/one poly bag/100~200sets per master carton|
|design||as your request|
- Q:Anti-theft door lock key inserted into the bad pull out how to do?
- Hello, this is a good solution. Three methods, one with a knife scraping pencil powder, spread to the key, and then inserted into the keyhole, so that powder into the lock cylinder. Two to the hardware store or binary shop to buy "sewing machine oil", the oil must be the other can not, this powerful, not easy to insert the key, the door is not good hit, low enough. Three can not change the words can only change the lock.
- Q:How do I identify the door lock level?
- Anti-theft door lock cylinder is generally divided into A-level, B-class and ultra-B-class. Anti-theft door security, in addition to the facade of the anti-theft, anti-theft door lock is also very important. Anti-theft door locks are good or bad, a direct impact on anti-theft door anti-theft function is good or bad.
- Q:Anti-theft door lock key cross good or flat good
- The cross is better than the flat cross is very difficult to open the flat is not the same friends
- Q:Bedroom door lock key do not insert how to do?
- 1: key direction problem. Or is the wrong direction, or in the absence of the case of the back, the key out.
2: There are foreign bodies inside the keyhole.
3: the door in the absence of a lock in the case of the key will appear to insert into the situation.
4: in the absence of foreign body, the right direction, with the tiger pliers gently knock into the key, you can open the door. And then get some pencil ash blown into the later like to open.
- Q:Do not lock the key?
- First, see if there is no window open can go in. There are windows can enter the room, then everything is fine.
Second, if there is no window can be entered, then there is a second way, that is, through the cat's eye to open the handle. Cat's eye can be opened in general, if it is a large cat's eye, you can use a curved pole into it, thus opening the handle.
Third, if it is no way, had permission to open a qualified staff. But the door was destroyed, but also had to give up.
- Q:Home room door lock, the key fell inside the way to open?
- The best foot faster, their first can do
- Q:How is the key to the top lock?
- And the installation of the contact or aftermarket to the distribution, this special key outside the basic no match, return to the manufacturers more insurance. If the key is lost, take the lock this thing to the key is not a good match, even with the price is also large, cost-effective program is more for the lock cylinder.
- Q:The door key does not move
- Lubrication, add some oil
- Q:Security door key broken in the door, and how to take out
- The key to the security door in the lock inside, and first look at the key is not dislocation, the correct location should be inserted into the key position. Find a medical tweezers try can not be taken out, if you can not twist, then find a bike gate wire in front of a small groove can try to hook out.
- Q:Key to insert the door lock is very strenuous, how to solve?
- You said is not the key is difficult to insert, you can add some pencil powder into the lock hole
We offer a wide range of high quality products made by brass, nickel silver, and iron with globalized material sourcing, transportation and customer service.
1. Manufacturer Overview
|Annual Output Value
||US$2.5 Million - US$5 Million
||North America; Southeast Asia; Eastern Asia; Western Europe
||Factory Audit Reports; Quality System Certificate
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||71% - 80%
|No.of Employees in Trade Department
||English, Chinese, Japanese, Korean
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range
||High and/or Average