Detailed Product Description
pvc wood grain decorative sheet
size: 1.40 * 400 m
thickness: 0.27 mm
pvc wood grain decorative sheet
1.Main material: polyvinyl chloride
2.Used for paint free of indoor decoration and furniture making inductry
3. Applications: covered by vacuum/membrane on the surface of various boards, such as MDF, venner boards, flake boards, fiberboards, block boards and other materials of high-pressure floor slabs, asbestos boards, slates, aluminum and plastic profiles which used for indoor decoration and furniture making industry. Door skin
- Q:Why is the foam plate melted by the wire?
- You do not specifically say anything, rock wool sandwich panels, steel sandwich panels, or other. Such as the arc of the post to drink the United States and Taiwan is to pay attention to the high content of the glue is not used in hot places usually less use, must be used only shaped ceiling, because it can bend, other places do not use.
- Q:What are the materials used in building energy efficiency and why?
- Now a kind of new materials, EPS building energy-saving module wall inside and outside the two layers of insulation, low thermal conductivity, only 0.025w / mk, 0.60w / mk than the national standard requirements, that is, the insulation performance than the national standard requirements 20 Times more than. In the north, northwest with the sea capacity module building, winter without raw stove, only the sun and household appliances generated by the heat, the indoor temperature can reach 15-22 degrees Celsius; summer do not open air conditioning, as long as the adjustment through the curtains, Direct, such as the house, the room Gonggong powder folder grasses mad Wei Fu even within the temperature can be maintained at 27 degrees Celsius, the real winter cool summer.
- Q:What is the meaning of EPS in insulation materials?
- Hey hey Tonight because of work needs, to sort out this information, by the way to answer your question, may not be very full, but at least from the performance side (in fact there are life and corrosion resistance, sealing and maintenance aspects, hydraulic characteristics, transport Installation and construction, etc
- Q:What kind of material to build a house insulation ah
- Insulation layer is a layer of foam board, can not carry the weight, hanging some things are through the insulation wall, hit the load-bearing walls. 1. Indoor insulation generally used "polystyrene foam board" production, the general thickness is 2..3 cm thick, you can use .7 cm expansion screw, to the hardware store to find can match. You can also use welding, then a long screw, is also very simple. Installation steps: . select the larger than the expansion bolt type 2mm hammer drill hole drilling (plastic expansion tube to the same size of the drill on the line), the depth of the length of the expansion tube; . into the expansion bolts; . according to the type of bolt Select the appropriate tools to tighten the bolts: a, ordinary expansion bolts: use the dead wrench or live wrench b, metal expansion bolts: the use of dead wrench or wrench or plum screwdriver c, plastic expansion tube: the use of plum screwdriver according to the actual Requirements, fastened to a certain extent.
- Q:What is the difference between polystyrene insulation board and extruded board?
- Cold and warm is not simple to wear clothes so simple, home is also the amount of warmth is missing
- Q:Can the roof insulation be filled with polystyrene board?
- Phenolic Composites Class A Fireproof Insulation Boards. Its long-term use temperature is -250 ℃ to 150 ° C, fire, nonflammable, dripping in high temperature environment, no softening only surface carbonization. Thermal conductivity coefficient of only about 0.023W / mk phenolic insulation board, insulation performance is very good. Phenolic resin has the advantages of non-flammable, low thermal conductivity, good insulation, sound insulation, good weather resistance, service life of up to 30 years or longer. Has a uniform closed-cell structure, low thermal conductivity, thermal insulation properties, and quite superior to polystyrene foam polyurethane; in a very short period of time can be used for a suitable temperature range of -200 ℃ to 200 ℃, Long-term use, better than polystyrene foam and polyurethane foam (110 ℃); phenolic molecules contain only carbon, hydrogen, oxygen atoms (80 ℃), by thermal decomposition, 140 ℃ to 160 ℃ C, in addition to produce a small Of the amount of CO gas, will not produce other toxic gases, lack of storage and fattening fat plug Dan Dan Dan 5.0% of the maximum smoke density. 25mm thick phenolic foam board can withstand 1500 ℃ flame spray 10min, only the surface of a little carbon carbide burn does not wear fire does not smoke and gas. Of the phenolic foam composite board can be in addition to alkali corrosion, can withstand almost all of the inorganic acid, organic acids, organic solvents erosion. Long exposure to sunlight, no significant aging, which has a good resistance to aging.
- Q:Xps insulation board and extruded board which is good
- The best choice of extruded polystyrene insulation board (extruded board), you said that is called benzene board, much worse than the extruded board, extruded board also qualified to achieve the level, such as B1 level, the market to buy And even the general use of B2 are not reach, especially the cable to produce high temperature, unlike the water to warm. But also to use good, or high temperature certainly toxic
- Q:I work in the polystyrene foam factory, do not know if this thing is toxic. I'm cutting the foam board thanks for everyone
- According to the following construction methods can achieve good results:
- Q:Who has the building part of the building, the decorative parts inside the metal decoration on the staircase handrail aspects of the content.
- First of all, understand a Fu Ding Wei scraping Tan calcium water set down the terminology words: step, that is, step by step short
- Q:What documents are required for external wall insulation supervision?
- Can be on: the cost of the network download. Can be free to register their own download, enter the home page in the upper left corner of the search bar search, you can. Specification of the standard number is as follows: "construction of fastener steel scaffold safety technical specifications" JGJ130-2011 "construction of fastener steel scaffold safety technical specifications" JGJ130-2001 Tip: "construction of fastener steel scaffold safety technical specifications" JGJ130 -2001 is the old version, has been abolished.
We produce 20 different chemical products,dealing with more than 5000 others. We assure you will enjoy good quality and professional service if you import chemicals directly from us. Your satisfication will be more after visiting our high-efficient and professional team here. Quality first is the principle for all our products with strict quality control system.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||19.00% North America
15.00% Mid East
11.00% Southeast Asia
10.00% Eastern Asia
5.00% Eastern Europe
5.00% Domestic Market
4.00% Western Europe
4.00% South Asia
2.50% Central America
2.00% Northern Europe
1.50% Southern Europe
1.00% South America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||71% - 80%
|No.of Employees in Trade Department
||Above 50 People
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range