PVC Tubes Made in China on Sale with Good Quality

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 kg
Supply Capability:
1000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specifications

pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.

Properties of pvc pipes:

1.  Material: pvc pipe unplasticized polyvinyl chloride

2.  Standard: GB, ISO9001, ISO14001

3.  Color: white  pvc pipe, grey  pvc pipe , etc.

4.  Specific Gravity, g/cm3, 20(C): 1.35 - 1.55

5.  Vicat Softening Temperature, (C)  >=79

6.  Longitudinal Reversion, %, 150(C) <=5< span="">

7.  Dichloromethane Resistance Test: No attack

8.  Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">

9.  Tensile Yield Strength, Mpa >=40

10.  Fitness of Water Tightness Test: No Leakage

11.  Fitness of Air Tightness Test: No Leakage

Features of pvc pipes : 
1)  Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2)  Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.

Application of pvc pipes:

1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture

 

Specifications of the pvc pipe:

Outer Diameter (mm)

Wall thickness(mm)

2.5MPA

2.0MPA

1.6MPA

1.25MPA

1.0MPA

0.8MPA

0.63MPA

φ20

20*2.3

20*2.0

φ25

25*2.8

25*2.3

25*2.0

Φ32

32*3.6

32*2.9

32*2.4

32*2.0

Φ40

40*4.5

40*3.7

40*3.0

40*2.4

40*2.0

Φ50

50*5.6

50*4.6

50*3.7

50*3.0

50*2.4

50*2.0

Φ63

63*7.1

63*5.8

63*4.7

63*3.8

63*3.0

63*2.5

63*2.0

Φ75

75*8.4

75*6.9

75*5.6

75*4.5

75*3.6

75*2.9

75*2.3

Φ90

90*10.1

90*8.2

90*6.7

90*5.4

90*4.3

90*3.5

90*2.8

Φ110

110*10.0

110*8.1

110*6.6

110*5.3

110*4.2

110*3.4

110*2.7

Φ125

125*11.4

125*9.2

125*7.4

125*6.0

125*4.8

125*3.9

125*3.1

Φ140

140*12.7

140*10.3

140*8.3

140*6.7

140*5.4

140*4.3

140*3.5

Φ160

160*14.6

160*11.8

160*9.5

160*7.7

160*6.2

160*4.9

160*4.0

Φ180

180*16.4

180*13.3

180*10.7

180*8.6

180*6.9

180*5.5

180*4.4

Φ200

200*18.2

200*14.7

200*11.9

200*9.6

200*7.7

200*6.2

200*4.9

Φ250

250*11.9

250*9.6

250*7.7

250*6.2

Φ315

315*15.0

315*12.1

315*9.7

315*7.7

Φ400

400*19.6

400*15.3

400*12.3

400*9.8

 

 

 

PVC Tubes Made in China on Sale with Good Quality

PVC Tubes Made in China on Sale with Good Quality

PVC Tubes Made in China on Sale with Good Quality

 

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:a/c drain tube in 01 eclipse?
OMG we spent a good 40 minutes trying to find the one on a Galant. Look under the dash on the driver's side towards the center up by the front firewall. Up and above to the right of the gas pedal. The left side of the big black plastic airbox is hopefully right there, if it's not covered up in trim panels, and there is the black plastic elbow tube coming from the box then bending forward through the firewall. Use that point of reference to go on the engine side and try to find it poking through the firewall. It only sticks out maybe 1/4 of an inch. Might be some metal hydraulics in the way. Probably a full arm length down, and that's with you draped over the car. It's a nightmare to get at, but it's doable once you find it and then find a way to snake your arm in from underneath. I used a long plastic tube taped to the blow tip of an air compressor and fed it in to the drain tube. Some people say stick a wire in , but I found the 90 degree bend in the tube on the inside made that worthless.
Q:What glue can I use to glue the plastic in toothpaste tubes, potato chip bags etc?
I use E-6000 clear glue for almost everything. I am a sewer and needed some weights so I used this glue on huge metal washers putting two of them together for more weight. I have had these weights for quite a few years. The trick to this glue is to let is set. According to the label is it flexible, paintable, non-flammable, waterproof, safe for photographs, etc. I would suggest not using this in an enclosed area for any length of time. Good luck - Hope that helps.
Q:In my sink I found a plastic tube used to inject drugs with a clear liquid inside it- there was a bitten lime?
Was it a test tube? Sometimes people do shots (alcohol shots) in test tubes. Sarah
Q:how long would it take for air inside a plastic tube 3inch by 1inch to go stale?
What do you mean by go stale? Smell bad? Become contaminated with organics from the tube? I would think you would also need to specify what kind of plastic that makes the tube to have a chance to answer this.
Q:SHOULD I CLEAN THE HAMSTERS TUBE?
Well, we always clean mine. I mean, sometimes that is what is stinking up the cage, so we just clean it out and then it is all better. You probably should clean it out. I clean mine out every week. Hope this helped.
Q:Physics question: magent and wire-wrapped tube 10 POINTS FOR GOOD ANSWERS?
Not slowly, but it will fall somewhat slower because of an induced current when it first enters and exits the wire covered section of the tube. In the middle section the two poles will induce opposite induction currents (and voltages), so the effect will cancel. But if what you want it to show eddy current effects, the coil arrangement is not a good way of doing the experiment. You want the resistance to be minimal so the eddy currents don't dissipate too fast. And you want the eddy currents at both poles of your magnet to be (relatively independent) and not cancel out in a series circuit. The easiest way to achieve that is to use a simple copper tube. Of course, if what the question is trying to do is to test if YOU understand the difference between the coil and the solid copper, then it might actually achieve its purpose. I bet most people will get it wrong. Good Luck with your experiment. Or your homework question. :-)
Q:Where can I buy golf club protector tubes in Toronto?
Do yourself a favour don't buy them,they are a pain in the neck.
Q:Orifice tube location?
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging . Remove the engine air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls--3.1L or Air Cleaner Assembly Replacement in Engine Controls--3.8L. Remove the vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement in Hydraulic Brakes. Remove the condenser tube. Refer to Condenser Tube Replacement . Remove the expansion (orifice) tube: 5.1. Use needle-nose pliers in order to grip the orifice tube. 5.2. Use a turning motion along with a push-pull motion in order to loosen the impacted orifice tube. 5.3. Remove the orifice tube. Important: DO NOT use any solvents or chemicals to clean the expansion (orifice) tube porous plastic inlet filter. Inspect the expansion (orifice) tube for the following conditions and clean or replace with a new tube as indicated: • Broken plastic frame (1) ; replace tube. • Inlet filter (3) damaged or plugged with fine gritty material; replace tube. • Inlet filter (3) coated with metal chips, flakes, or slivers; coating may be removed with low pressure shop air ONLY and reused if cleaned satisfactorily. • If reusing the tube, discard the O-ring seals (2). Installation Procedure
Q:Why, in general, the strong tube is plastic tubes, weak tubes are metal tubes?
The metal tube can be grounded to shield, eliminate interference, and reduce the electromagnetic interference between the weak current
Q:What is the PPR plastic pipe?
As a result of the use of random copolymerization technology, the strength of polypropylene and high temperature resistance have been well guaranteed, and thus become the main force of water pipe material. It has the following advantages:1, health, health and environmental protection. Polypropylene is an environmentally friendly material that can be used for potable water delivery.2, the connection with hot melt connection, become one hundred percent, no leakage, other materials with silk mouth connection, its impermeability is less, and also avoid the glue bonding toxicity.3, high temperature resistance, good pressure resistance, small transmission resistance.4, cheap moderate.5, long service life, according to the national standard GB/T18742 production and use, you can use 50 years.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range