DN160mm PVC Pipe for Water Supply on Sale
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1. Length: 6m, 12m or In compliance to your requests
2. Pipes are available in the form of coils or straight lengths
3. A comprehensive range of pipe fittings are always held in stock.
2.Packaging & Delivery
Packaging Detail: | standard packing for export or as requested |
Delivery Detail: | 1~5weeks |
3.size range
Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | |||
Wall thickness(mm) | Wall thickness(mm) | PE80 | PE80 | PE100 | PE100 | |
Nominal Outside Diameter(mm) | SDR17.6 | SDR11 | SDR17.6 | SDR11 | SDR17.6 | SDR11 |
20 | 2.3 | 3.0 | 0.132 | 0.163 | 0.133 | 0.164 |
25 | 2.3 | 3.0 | 0.170 | 0.211 | 0.171 | 0.212 |
32 | 2.3 | 3.0 | 0.222 | 0.278 | 0.224 | 0.279 |
40 | 2.3 | 3.7 | 0.283 | 0.430 | 0.284 | 0.432 |
50 | 2.9 | 4.6 | 0.438 | 0.666 | 0.440 | 0.670 |
63 | 3.6 | 5.8 | 0.686 | 1.053 | 0.689 | 1.058 |
75 | 4.3 | 6.8 | 0.975 | 1.470 | 0.980 | 1.478 |
90 | 5.2 | 8.2 | 1.411 | 2.130 | 1.419 | 2.141 |
110 | 6.3 | 10.0 | 2.084 | 3.159 | 2.095 | 3.176 |
125 | 7.1 | 11.4 | 2.670 | 4.098 | 2.684 | 4.120 |
140 | 8.0 | 12.7 | 3.347 | 5.108 | 3.364 | 5.135 |
160 | 9.1 | 14.6 | 4.368 | 6.705 | 4.391 | 6.740 |
180 | 10.3 | 16.4 | 5.549 | 8.474 | 5.578 | 8.519 |
200 | 11.4 | 18.2 | 6.817 | 10.451 | 6.853 | 10.505 |
225 | 12.8 | 20.5 | 8.596 | 13.228 | 8.641 | 13.298 |
250 | 14.2 | 22.7 | 10.611 | 16.268 | 10.666 | 16.354 |
280 | 15.9 | 25.4 | 13.274 | 20.396 | 13.343 | 20.502 |
315 | 17.9 | 28.6 | 16.804 | 25.818 | 16.892 | 25.953 |
355 | 20.2 | 32.3 | 21.398 | 32.861 | 21.510 | 33.033 |
400 | 22.8 | 36.4 | 27.164 | 41.706 | 27.306 | 41.924 |
450 | 25.6 | 40.9 | 34.320 | 52.688 | 34.499 | 52.964 |
500 | 28.4 | 45.5 | 42.311 | 65.135 | 42.533 | 65.476 |
560 | 31.9 | 50.9 | 53.169 | 81.583 | 53.447 | 82.010 |
630 | 35.8 | 57.3 | 67.134 | 103.347 | 67.486 | 103.888 |
4.size range (water pipe)
Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | |
SDR11 | SDR13.6 | SDR17 | SDR21 | SDR26 | SDR33 | |
Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | |
PE80 | PN12.5 | PN10 | PN8 | PN6 | PN4 | |
PE100 | PN16 | PN12.5 | PN10 | PN8 | PN6 | |
Nominal Outside Diameter(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) |
20 | 2.3 | |||||
25 | 2.3 | |||||
32 | 3.0 | |||||
40 | 3.7 | |||||
50 | 4.6 | |||||
63 | 5.8 | 4.7 | ||||
75 | 6.8 | 5.6 | 4.5 | |||
90 | 8.2 | 6.7 | 5.4 | 4.3 | ||
110 | 10.0 | 8.1 | 6.6 | 5.3 | 4.2 | |
125 | 11.4 | 9.2 | 7.4 | 6.0 | 4.8 | |
140 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 4.3 |
160 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 4.9 |
180 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 5.5 |
200 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 6.2 |
225 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 6.9 |
250 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 7.7 |
280 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 8.6 |
315 | 28.6 | 23.2 | 18.7 | 15.0 | 12.1 | 9.7 |
355 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 10.9 |
400 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 12.3 |
450 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 13.8 |
500 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 15.3 |
560 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 17.2 |
630 | 57.2 | 46.3 | 37.4 | 30.0 | 24.1 | 19.3 |
710 | 52.2 | 42.1 | 33.9 | 27.2 | 21.8 | |
800 | 58.8 | 47.4 | 38.1 | 30.6 | 24.5 |
5.FAQ
Q:What the Raw material?
A:We use 100%Korea material.
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:You find this tubing with home cinema equipment cables. It's mounted on the wall and does not need any wall cable grippers or anything.
- ITS A CONDUIT, THEY CAN BE METAL OR PLASTIC.
- Q:underwater does air move faster thru metal or plastic tubing?
- Assuming the tubing has the same ID, metal or plastic Underwater makes no difference UNLESS you are deep enough that the plastic tubing is compressed by the water pressure.
- Q:I need to buy plastic (or clear colored) plastic tubes with caps. Approximately 5 or 6 inch in length and close to 1 inch or close to it in width. Would appreciate any suggestions where I find it.
- the hardware giants like Lowe's and the Ho Depot are your best bet ... go in the store and ask for plastic tubing==== HEY !! you might do better to go to a friendly pharmacy and get some clear plastic medicine bottles ... go and ASK ... and if this is
- Q:My house is two floors, though I think it was originally a one-story cape cod, and the upstairs was a single semi-second floor/attic. Anyways, the attic is now higher up, but the walls still slope on the sides. The air/heating unit is in the crawl space, duct work runs directly to vents/returns on the first floor, but for the second floor there are these two really large plastic(?) pipes that run up to the second floor from which I believe the ductwork is distributed. What are these called?
- Vertical duct work. In general, if forced air, heated, cooled or even unconditioned, goes through it it is called duct work, unless it is an accessory / fitting such as a grille, diffuser, register etc. It's called duct work or vertical duct work if you would like.
- Q:Are plastic tubes suitable for hydrostatic pressure testing?
- Yes, plastic tubes can be suitable for hydrostatic pressure testing. Plastic materials such as PVC, polyethylene, and polypropylene are commonly used for this purpose due to their strength and ability to withstand high pressure. However, the suitability of plastic tubes depends on various factors like the specific type of plastic, thickness, and intended pressure levels. It is important to consider the properties and limitations of the plastic material before conducting hydrostatic pressure testing.
- Q:I'm talking about toothpaste, hand cream, hair products, etc. They changed their packaging so that you can't roll the bottom up anymore. It unrolls and it is almost impossible to get the rest of the product. Today I just cut the bottom off!
- Ha! You figured out as I did. It's the only way to get the last drops from the top of the tube. Hulk Hogan isn't strong enough to squeeze the last part out.
- Q:Are plastic tubes suitable for agricultural irrigation?
- Yes, plastic tubes are suitable for agricultural irrigation. They are commonly used due to their durability, affordability, and resistance to corrosion and weathering. Plastic tubes are flexible, making them easy to install and maneuver around crops, and they can efficiently deliver water to plants in a controlled manner, conserving water resources. Additionally, plastic tubes are available in various sizes and can be customized to meet specific irrigation needs, making them a practical choice for agricultural applications.
- Q:Are plastic tubes resistant to bending fatigue?
- Yes, plastic tubes are generally resistant to bending fatigue due to their flexibility and ability to withstand repeated bending without breaking or becoming damaged.
- Q:Are plastic tubes resistant to cracking?
- Yes, plastic tubes are generally resistant to cracking.
- Q:How do you measure the diameter of a plastic tube?
- To measure the diameter of a plastic tube, you can use a caliper or a ruler. Place the tube on a flat surface and use the caliper's jaws or the ruler to measure the distance from one edge of the tube to the opposite edge, ensuring that the measurement is taken at the widest point. This measurement will give you the diameter of the plastic tube.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DN160mm PVC Pipe for Water Supply on Sale
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords