PVC Pressure Pipe PN10&16 Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:How to detect the reliability of rubber hose
- Hose size measurement: the inner and outer diameter, outer diameter, wall thickness, enhancement layer concentricity, inner and outer layer of glue thickness, assembly diameter, new GB and ISO increased the length and the measuring point mark, provides no pipe joint and a hose length of various pipe joint measurement method.
- Q:The selection of valves and fittings has the following requirements
- The selection of hose inner screw thread joint can be rotated, because not hose and the joint body can rotate freely after buckling, configuration of internal thread after disassembly for hose.
- Q:The pipe of the gas water heater is buried in the wall. It is made of nylon tube and rubber tube. Is it possible to use rubber tube?
- Plastic pipes and rubber pipes are available, but the length, time and conditions are clearly defined.
- Q:The rubber tube of the gas cooker is aging. It's leaking. Can you change it for yourself?
- You can change it yourself. However, many families do not yet know that in the past two years, the state has made great efforts to change rubber tubes into metal hoses, because metal hoses are safer, longer life and better sealing. They will certainly replace rubber pipes in the future.
- Q:Toilet hose and water tank joints leaking, how to repair?
- No rib sleeve, the use of pipe outside the buckle fixed, sealed, may be the aging of the tube, buckle clamping difficulties and other reasons. If the pipe is aging, you can cut or replace the tube in the aging part. It is difficult to buckle and clamp, so you need to change the buckle.
- Q:What's the difference between hose and hose for compressed air?
- In use, it is usually marked with color. For example, the intake is made of blue, and the exhaust is made red, but it is not necessary.
- Q:How to determine the tensile strength of GB rubber joint?
- The tensile strength of adhesive joints that can resist the ultimate capacity rubber tensile failure, tensile test piece refers to fracture when the unit section of the load, also known as tensile strength, tensile strength, unit MPa (MPa). Tensile strength is generally used as the main physical and mechanical standard in rubber joint industry.
- Q:Faucet hose connection problem
- It is recommended to buy two kinds of hard bellows, soft metal hoses (black silk stripes). When the metal hose is installed, the joint should be horizontal or vertical, and the water pipe and gasket are not sealed properly. It will leak and do not need to be eaten with raw material.
- Q:How long is the service life of the gas hose?
- The protection work is very important, regular replacement of gas hose and make use of the gas hose gas pipeline safety in general, the gas hose has a life span of two years, usually pay more attention to inspection / check whether the aging hose, wear, corrosion or bad connection, avoid leakage.
- Q:What kind of material does hose screw protection cover have? What are their advantages and disadvantages?
- Hose cover is usually made of nylon or polyethylene
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pressure Pipe PN10&16 Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords