Q:How can I install the patch LED lamp belt on the wood chip casting board? With double-sided glue will be hot, and can not use the clip on the screw, what should I do?

With double-sided adhesive, the temperature will not be very high. So it won't fall either. That's how I got it. It took me more than half a year, and I didn't have any problems

Q:How many volts is a single LED on the LED patch band?

The single LED on the LED patch band is around 3.3V.LED light emitting diode, which is a nonlinear component, its operating voltage (tube pressure drop) is also different: ordinary red LED about 1.5 V; ordinary green LED about 1.8 V; bright white LED up to 3.3 V or so.

Q:What is the difference between patch LED beads and LED beads: General

A LED chip is led lamp. Common LED has two or four pins, and there is no needle foot, close to the circuit board, copper foil welding, are the same. You should choose the lamp the key is to consider the color temperature, color rendering index, light efficiency, light, and power quality, buy these things to buy better quality, common is topclass photoelectric

Q:Indoor full color LED display module and LED what is the difference between a full color?

Indoor full color LED display module and LED chip has three full color difference. The first part: Second: third light emitting display module: maintenance: LED full color display is not easy to maintain. LED full color patch is relatively easy to maintain.

Q:What, in what way do I shunt the LED?

The voltage problem is determined by the size of your POWER SUPPLY, according to Ohm's Law: the series voltage is accumulated and the shunt voltage is the same.

Q:SMD LED lamp working voltage?

Voltage range of white LED lamp: 3.0-3.4VThe pressure drop of the red LED is 2.0--2.2VThe yellow light emitting diode has a pressure drop of 1.8 - 2.0VThe green light emitting diode has a pressure drop of 3 - 3.2VThe blue light emitting diode has a pressure drop of 3.0-3.4VSMD voltage is basically the same as double lead line. Current is generally 20~60mA, and some work current can exceed 100mA.

Q:0603，0805，1206，3020，3528，5050，355 what is the current and voltage of these patch LED? Please give advice!

LED patch: 0603, 0805, 1206, 1210, 5050. The 0603: conversion to metric is 1005, that of the LED element length is 1.0mm, width is 0.5mm. The trade is abbreviated as 1005, and the English name is 0603. The 0805: conversion to metric is 2125, that of the LED element length is 2.0mm, width is referred to as the 2125 inch 1.25mm. industry, it is 0805. The 1206: conversion to metric is 3216, that of the LED element length is 3.2mm, width is 1.6mm. The trade is abbreviated as 3216, and the English name is 1206. The 1210: conversion to metric is 3528, that of the LED element length is 3.5mm, width is 2.8mm. The trade is abbreviated as 3528, and the English name is 1210. The 5050: This is a metric called, said that the LED element length is 5.0mm, width is 5.0mm. Industry abbreviation 5050

Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?

Packaging is for TOP series LED, that is, the type of plastic molding. The patch is based on the PCB circuit board for molding. Mold release agent is used in molding.

Q:What determines the brightness of the patch LED?

The brightness is consistent over a short period of time, that is, only by considering current and voltage consistency.Long term brightness is consistent with the consideration of the spacing and heat dissipation of different circuits. Uneven heat can also affect brightness.

Q:What is patch SMD-LED?

This really do not know how to answer you, like a sheet of the same type of solder paste used to operate, it can be said that the plug-in is not, it is patch it!