Forklift Truck 2.5ton Gasoline & LPG with CE
Packing:In The Nude
Engine: Nissan K25
Wide-view mast, solid overhead guard,
Ergonomic adjustable steering wheel and seat.
|2||Power Type ||Gasoline/LPG|
|Characteristic& Dimension ||5||Lift Height||mm||3000|
|6||Free lift height||mm||120|
|7||Fork Size||L× W× T ||mm||1070× 122× 40|
|8||Mast Tilt Angle||F/R||Deg||6° /12°|
|9||Front Overhang (Wheel center to fork face)||mm||482|
|12||Overall Dimension||Length to face of fork(Without fork)||mm||2530|
|14||Mast Lowered Height||mm||1985|
|15||Mast Extended Height(With backrest)||mm||4030|
|16||Overhead Guard Height||mm||2070|
|17||Turning Radius (outside)||mm||2240|
|18||Min. right angle asisle width||mm||2000|
|Performance||19||Speed||Travel (No load)||km/h||20|
|20||Lifting (Full load)||mm/s||490|
|22||Max. Drawbar Pull(Full load)||kn||13.5|
|23||Max. Gradeability (No load/Full load)||%||20|
|Power& Transmission||30||Battery||Voltage/Capacity ||V/Ah||12/90|
|33||Rated output/r. p. m.||kw||37.4/2300|
|34||Rated torque/r. p. m.||N@ m||176.5/1600|
|35||No. of Cylinder||4|
|36||Bore× Stroke||mm||89× 100|
|38|| Fuel Tank Capacity||L||60|
- Q:What is a forklift truck
- Forklift front end of the apparels, paper roll for efficient, safe, without damage of handling operation, widely used in papermaking, carton packaging production, printing and other industries and the newspaper.
- Q:Where should I take the special operation equipment certificate for the forklift?
- The forklift card shall be the special operation certificate of the quality inspection bureau. You can go to the local quality supervision bureau special equipment department or the special equipment operator training school to take the exam training.
- Q:The forklift has no oil. How can you put it on when you have refueling
- The forklift truck fuel on the diesel filter near a flowline screws to open, then oil clams clams oil with the hand, only to the oil spray out, put the screw, or look at the instructions on the use of forklift truck.
- Q:What information do you want to prepare for the forklift
- Requirements: Ask for physical health and no medical opinion that you can't drive a forklift (this depends on the results and conclusions). Material: Two copies of the id card and id card, four color photos and one in black and white. Sign up for the fee, and then go for a check-up for 57 yuan (depending on the case).
- Q:I want to learn about the forklift truck. I don't know how well the forklift man works.
- If you go to school to study and study the word to be asked about 1500, a certificate of 700 to 900 is ok, the forklift truck is very simple, two hours is learned
- Q:A manual forklift oil leak, what if you can't get up?
- The relief valve spring failed Work pressure relief valve is used to adjust system, keep the pressure in a certain range, prevent due to overloading, the hydraulic cylinder piston to the limit position or other reasons caused by the damage of parts of hydraulic system. The relief valve is mainly composed of spring force to press the ball to achieve the purpose of open and close of valve position. When the hydraulic pump output pressure in excess of the prescribed value, high pressure oil pressure overcomes the part of the oil in the high pressure relief valve oil spill tank back. When the oil reaches specified value, the spring under the action of prestressing force in itself, the steel ball pressure on the valve position, the relief valve closed. If the relief valve spring failure, hydraulic oil under pressure from below system regulation would have forced from ball valve position into the oil spill: and cause of leakage, make the system failure. Repairs must be replaced the spring, and then using the adjusting screw to adjust the spring pressure to the provisions of the 14 mpa. The adjustment according to the 600 mm from the center of the load in the demand of load 7.5 t of the goods, when goods in seems up with locking nut locking, the pressure is needed to adjust the pressure.
- Q:The scope of the forklift truck
- There are many brands of forklift brands available on the market today, and the products are complex and the products are technically strong and professional. This paper mainly introduces the selection, brand selection and performance evaluation criteria. The model and configuration required for the selection of the car. There are usually three types of car types: internal combustion forklift, electric forklift, and forklift truck. (1) internal combustion forklift truck is divided into general internal combustion forklift truck, heavy lift truck, container forklift truck and side forklift truck. (1) general internal combustion forklift Generally use diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 ~ 8.0 tons, homework channel width is generally 3.5 ~ 3.5 meters, emissions and noise into consideration, usually used in outdoor, workshops or other places with special requirements for emissions and noise did not. Due to the convenience of fuel replenishment, long time continuous work can be achieved, and can be suitable for work in bad environment (such as rain).
- Q:4 tons of cross-country forklift lifts the four-meter cross-country forklift
- Forklift truck is an industrial transport vehicle, which is a variety of wheeled transport vehicles for loading and unloading, stacking and short-range transportation. International standardization organization ISO/TC110 is called an industrial vehicle. Often used for the transportation of large items in storage, usually with a fuel engine or battery. Forklift truck is an indispensable member of warehouse and logistics equipment, and forklift truck is a great service for cargo handling. Forklift is a wide variety of vehicles and is widely used in various industries, depending on the use of the forklift truck.
- Q:Skill and use of side forklift?
- Forklift truck definition forklift is a variety of wheeled transport vehicles for loading and unloading, stacking and short-range transportation. International standardization organization ISO/TC110 is called an industrial vehicle. Material handling machinery. Widely used in the national economy, such as station, port, airport, factory, warehouse, etc., it is an efficient equipment for mechanized loading and unloading, stacking and short distance transportation. Self-propelled forklifts appeared in 1917. During world war ii, forklifts were developed. China started making forklifts in the early 1950s. English name: Forklift or Forklifttruck scope of industrial carrying vehicles are widely used in ports, railway stations, airports, depot, workshop, warehouse, distribution center and distribution center, etc., and can enter the cabin, car, and the container pallets of goods loading and unloading, handling operations. It is a necessary equipment for pallet transportation and container transportation.
- Q:What is a forklift for?
- Selection of forklift brands on the market at present is numerous, complex models, together with the product itself technology is strong and very professional, so the choice of models, such as the supplier of choice is a lot of choose and buy the companies often are faced with the problem. This paper mainly introduces the selection of car, brand selection, performance evaluation criteria and the contribution rate of Chinese forklift truck overseas.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range