China Supplier 85% Calcined Bauxite Price of CNBM in China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
11 m.t
Supply Capability:
11111111 m.t/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Structure of Calcined Bauxite Description

Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron.  From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle.  Very difficult to melt.  Insoluble in water,  soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material. 

 

2.Main Features of the Calcined Bauxite

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum

hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns. 

3.Main usage of the Calcined Bauxite

(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc. 
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department. 
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties. 
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries. 
(5)  in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects. 
(6)   manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.

 

4. Calcined Bauxite Images

 

China Supplier 85% Calcined Bauxite Price of CNBM in China

China Supplier 85% Calcined Bauxite Price of CNBM in China

 

 

5. Calcined Bauxite Specification

  

Item

Al2O3

(min)

Fe2O3

(max)

TiO2

(max)

SiO2

(max)

KO2+NaO2

(min)

CaO+MgO

(min)

Bulk Density(g/cm3)

75

75%

3.0%

4.0%

8%

0.3%

0.6%

2.7min

80

80%

3.0%

4.0%

8%

0.3%

0.6%

2.8min

85

85%

2%

4.0%

8%

0.3%

0.6%

3.0min

86

86%

2%

4.0%

8%

0.3%

0.6%

3.2min

88

88%

1.8%

4.0%

7%

0.25%

0.6%

3.25min

90

90%

1.8%

4.0%

7%

0.25%

0.6%

3.25min

 

 

Size: Lumps /Grains:0-1mm,1-3mm,3-5mm,5-8mm /Powders:100mesh, 200mesh,325mesh

Packing: 25KGS/Bag,1T/Bag,1.25T/Bag; Or as per requests.

 

6.FAQ of Calcined Bauxite

1). Q: Are you a factory or trading company?

A: We are a factory.

2). Q: Where is your factory located? How can I visit there?

A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!

3). Q: How can I get some samples?

A: Please connect me for samples

4). Q: Can the price be cheaper?

A: Of course, you will be offered a good discount for big amount.

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the concept of lightweight refractory material?
Lightweight refractory material has high porosity, mechanical strength and erosion resistance. Compared with normal refractory bricks, it is a kind of refractory material with large volume shrinkage in high temperature, low thermal conductivity and small bulk density. It is used as thermal insulation material in industrial furnace and other thermal equipments. It has poor wear resistancel.
Q:What is the role of the vermiculite fireproof material?
It can be widely used in construction, decorative ceiling, wall, floor and fireproof door . Especially suitable for airport, railway station, passenger terminal, exhibition hall, hotels, shopping malls, hotels, and other public places and factory, fuel warehouses which have high requirements for fire proofing, etc. With its special thermal insulation, it can also be made to the various types of heat insulation board offered to machines (such as a variety of industrial furnace and assembly line equipment) and furniture, etc. Due to the low density of the product itself, a lot of shipyards in foreign countries use it as ceiling, wall and deck, so the development potential of the domestic shipbuilding market is huge.Expanded vermiculite is porous, lightweight, and dystectic, the most suitable for insulating materials at high temperature (below 1000℃) and fire insulation materials. In the experiment, 15cm- thick cement vermiculite burns for 4-5 hours under 1000℃, but the back temperature is only 40℃. 7 cm-thick vermiculite slate burns for 5mins through the fire flame welding net under 3000℃, the frontage melted, but you don’t feel hot with your hands holding the back side. According to aforementioned, vermiculite slate is superior than all insulating material, such as asbestos, and diatomite products.
Q:What's the difference between refractory metal raceway and fireproof raceway?
In terms of fire protection, fireproof raceway means that it is composed of the material with certain combustion performance and generally made of flame retardant or incombustible material. While for the refractory raceway, according to GA 479-2004 "Fire Resistant Cable Tray", its most important properties are: Fire resistance of the cable tray should meet with the following requirements: The cable tray of I grade fire resistance should keep the working time more than 60min, of II grade fire resistance should keep the working time more than 45min, and of III grade fire resistance should keep the working time more than 30min. Hope this is helpful for you! Thank you.
Q:About the use of horseshoe glass kiln refractories
the lower portion of advanced clay brick, the lower portion of magnesia-chrome brick arch - high-purity silica brick; flue - clay brick; breast wall--33 # fused zirconia corundum brick (with shrinkage); fused zirconia bottom --33 # fused zirconia corundum brick (with shrinkage); regenerative chamber- the upper part of sintered magnesia-chrome brick, cooling section 33 # electric smelting no shrinkage fused zirconia corundum brick; the wall - the melting section 41 # no shrinkage fused zirconia corundum brick (including 41% of zirconium; the lattice- superstructure of high purity magnesia brick, the same below); small stove --33 # fused zirconia corundum brick (with shrinkage). It can be said that it is the maximum configuration, if the funds is limited it can be downshift appropriately.
Q:What are the specific steps of stirring the steel ladle castable?
Steps are as follows. 1 Compulsory mixer is used to stir the castable and bags, rope and other debris can not mix in the castable when stirred. 2, Castable should be unpacked on the scene. Stirred volume depends on the capacity of the mixer. Castable should be accurately measured and put into a blender. 3 The process of first dry mixing and then wet mixing is adopted. After the castable is added to the mixer, it is dryly mixed for 2 minutes, add about 5.2 to 5.5 percent of water and continue to add water while stirring. Water that is 80% of the total should be added, and then decide whether to continue to add or not depending on the consistence (noting that the water must be clean water and sewage can not be used). Then it is wetly mixed for 4 minutes and stirred for not less than 6 minutes at one time, until castable is even. In general, the bottom is slightly dry and the wall of the ladle is slightly dilute (the amount of water is only for reference). 4, The amount of water and mixing time should be controlled strictly when stirred to ensure that the needs of the consistency are met. If castable is too thin, it will seriously affect the quality of the material. The stirred volume, stirring time and water that is added should be consistent and they can not suddenly be thick or suddenly be thin. If the consistency does not meet the requirements, the castable should be put back to the mixer and stirred with appropriate water or dry materials. 5, It should be stirred evenly and casting should finish in 20 minutes, in order to avoid sclerosis, affecting structural strength of ladle lining 6, After each completion of construction, varieties of castable should be changed and the mixer should be cleaned 7, Stirring can stop in halfway. If the mixer breaks down and it can be repaired in a short time, some of the materials have to be removed before the machine is opened. If the machine can be repaired on time, castable refractory should all be removed.
Q:As for fireproofing material rock wool and glass wool, which one is better?
Rock wool board and glass wool board are a kind of new construction thermal insulation material, it's widely applied in construction and has replaced traditional thermal insulation material to some degree. With the gradually deepening study of rock wool board, glass wool board, we can find that these insulation materials have advantages in many aspects but there are also many deficiencies, particularly there exists a lot of controversy about the impact on the human body. The production process of rock wool board and glass wool board usually includes: after melting in high temperature of rock or glass, inorganic fiber is produced by high-speed centrifugation equipment, and at the same time add binder,dust laying oil,silicone oil at certain proportion, then produce sheet material according to different requirements. It has good thermal insulation properties, mechanical property, sound absorption characteristics, belong to incombustible material and is cheap. In general, insulation, security and economy should not be contradictory, three aspects should be taken into account, balanced chosen and developed. Rock wool board and glass wool board and other such materials should be properly selected and applied to the appropriate structure, so that the choice of material will play their strengths and avoid their weaknesses.
Q:Do you know where I can buy refractories?
Refractories are sold in following companies : Address of Huadu Refractories Co., Ltd. : NO.11 Huanjin Road, Fuyang, Hangzhou Address of Zhenxing Special Fire-Proof Material Co., Ltd. : No. 54 Pingjing Road, Yuhang District, Hangzhou Address of Zhongnai Refractories Co., Ltd.: No. 345 Fuyang, Hangzhou, Zhejiang Province
Q:How much is the content of boron carbide in refractory material?
Boron carbide is used in refractory material. For example, generally we could add 0.2% of boron carbide into magnesia carbon bricks. It is suggested that 0.5% is enough, because it has strong effect in boosting melt. It is said that 0.5% would be alright since boron oxide after oxidation belongs to material of low melting point, so the amount should be limited within 0.5%-1%,
Q:What are the fire endurance requirements of class A fire resistant door ?
Hardwares are professional fire resistant lock, fireproof door closer, fire hinge, handle, latch and sequencer, and they can also be configured according to user needs. Fire resistant time of class A and B fire resitant door is 12h and 09h respectively. It can also be customized according to customer needs into a variety of non-standard specifications. Steel fire door is developed in accordance with the national standard GB12955-2008, and in line with ISO3008, BS476 standards. Requirement: fire endurance should meet the A,B and C fireproof requirements respectively. You can also choose to install hold-open door device to leep the door leaf usually in open. Doorframe and door leaf is made up of imported or domestic quality electrolytic steel plate, electro galvanized steel plate or stainless steel plate, filled with quality expanded perlite fireproof panel which can withstand high temperature above 1200 ℃. The surface is processd with electrostatic spraying plastics, and auxiliaries are stainless steel fire resistant lock (or pipe shaft lock ) , galvanization for steel (or stainless steel) fire hinge, domestic(or imported) door closer.
Q:What kind of material is refractory bauxite?
Refractory bauxite, also known as bauxite alumina or bauxite with high alumina, is the main raw material for the production of high alumina (aluminum content ≥48%, belongs to LAS) refractory.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range