CDD16-970 / 1.6T Electric Pallet Stacker

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Counterbalanced Electric Pallet Stacker Technical Specification

 

Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically a programmable logic controller, with a human-machine interface for display, connected to a central control system.

 

Other than stacking, a stacker has three basic movements:

 

Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers.

Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected by bevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller's cabin above the boom conveyor or boom. Modern stackers can be controlled remotely.

Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel or helical gears.

The conveyor belts used in stackers may be made of fabric or metal wire, depending upon the material to be handled. They are driven by pulleys, which in turn are driven by DC motors. The motors and gear are coupled by fluid coupling.

 

Most stackers are electrically powered by way of a trailing cable. There are basically two types of cable trailing: power cord rotating drum (PCRD) and control cable rotating drum (CCRD). Pendulum adjustments are made to ensure the proper alignment of these cables while the stacker is travelling.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How to use the elevator to be safer and more efficient
Annual maintenance Check all hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. Remove the hydraulic oil, remove the oil strainer and remove the oil strainer, clean it up and then put it back in the tank. Be familiar with 'ten notices' 1, pay attention to the agencies should regularly check and adjust the brake of the brake and the clearance between the brake wheel, flexible and reliable. The clean surface, there should be no dirt, in case of dirt must wash with gasoline or thinners. 2, pay attention to removing the hydraulic tank of fuel cap, remove the cap around earth, unscrew the cap, remove residual impurities in the joint area (not rinse in order to avoid water seeping into the tank), confirmed to open the cap. 3, pay attention to the elevator remove the hydraulic tank of fuel cap, filter cover, test hole, hydraulic tubing parts, cause the system oil when exposed to avoid dust, remove the parts to open completely clear before first.
Q:There are different kinds of milling machine and vertical lifting machine milling machine
Horizontal milling machine also can use the above all kinds of cutting tools, but not as convenient vertical milling, mainly can use the rack cutter (mainly side and face milling cutter, flake cutter, etc.). Milling tank, milling plane, cutting etc
Q:Seven tons of lift should be fitted with the straight screw and motor
Can be judged according to the accuracy requirement of lead screw grinding or rolling, depending on the load and its acceleration can choose servo power right away and screw the maximum load capacity (do longer engineers can intuitive judgment the diameter of the screw and large), so that you can around the power of the servo motor of the different speed and different lead screw to match, so there will be several different schemes: high speed servo motor with small lead screw (sometimes deceleration machine), big inertia servo with lead screw. Under the condition of the machine cost to determine, from two to three scheme choice, choice of method is to choose low cost, with high stability, cost effectiveness and cost are the same common and suppliers have a spot. If the single from choose the ways of the servo and screw usually have an intuition, like 3000 revolutions of servo goods on the market the most sufficient, screw is according to the supplier's inventory.
Q:Why is the large laser engraving machine plus half the platform?
About whether to lift: all are generally two kinds of the lifting methods at present, screw support lifting and hydraulic elevator, screw because of the limitation of itself bearing part can only support plate lifting platform, so generally make some lifting; Hydraulic lift, JQ1325 hydraulic lift can be fully raised, the hydraulic platform can carry 4-10 tons of stone. More questions can be asked about the r&d department of jinan jinqiang laser digital control equipment co., LTD.
Q:The advantages and disadvantages of using diesel engine as an engine
Polluted air, the exhaust fumes from diesel engines are not processed directly into the atmosphere, making environmental damage more serious. Make noise, noise pollution has become another environmental pollution, the diesel engine will obviously affect people's work and life when working. (3) at low temperature is not easy to start, when the environment temperature is lower than 5 ℃, the machine, diesel brand is undeserved, cause machine, diesel oil viscosity is bigger, the diesel engine crankshaft starting resistance moment is larger, it is difficult to start, affect the normal operation.
Q:How to use the ball screw platform?
Second, heyman screw can see lu, platform settled on first use, carefully to see if there are any more abnormal hydraulic parts, electrical appliances, layout, to ensure that no more than about geomagnetic held before commissioning, no-load again after 3 ~ 5 times a load test.
Q:The characteristic of shear fork platform
Electrical control mode; Work platform form; Dynamic form; Walking actuators and so on. The correct choice of all kinds of configuration, the function of the lifting platform can be maximized, the best use effect is obtained.
Q:Which is good for mobile goods elevators?
Jinan jiyang industrial hydraulic lift characteristics: strong structure, big load, steady lifting, simple and convenient installation and maintenance, is economic and practical goods transportation equipment.
Q:What standard elevator platform needs to go to the special equipment inspection to report
(the state council of the People's Republic of China on March 11, 2003 to no. 373 Based on January 24, 2009 the state council on amending the decision of the < > special equipment safety supervision regulations "amendment)
Q:When the hydraulic platform drops, it feels very shaken and unbalanced. Please answer?
Can you adjust the flow rate to slow down the same amount of pressure and the decrease is much faster than the increase. This does not know that the valve is connected to the solenoid valve, which may be the overflow valve or the balance valve The oil tank has no refueling mouth and oil outlet?

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range