CDD12-910 / 1.2T Electric Pallet Stacker

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 Counterbalanced Electric Pallet Stacker Technical Specification

Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically a programmable logic controller, with a human-machine interface for display, connected to a central control system.

 

Other than stacking, a stacker has three basic movements:

 

Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers.

Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected by bevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller's cabin above the boom conveyor or boom. Modern stackers can be controlled remotely.

Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel or helical gears.

The conveyor belts used in stackers may be made of fabric or metal wire, depending upon the material to be handled. They are driven by pulleys, which in turn are driven by DC motors. The motors and gear are coupled by fluid coupling.

 

Most stackers are electrically powered by way of a trailing cable. There are basically two types of cable trailing: power cord rotating drum (PCRD) and control cable rotating drum (CCRD). Pendulum adjustments are made to ensure the proper alignment of these cables while the stacker is travelling.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Introduction of vertical elevator milling machine
Vertical knee-type milling machine is a general-purpose milling machine. Vertical milling machine by end milling cutter, end mill, cylindrical milling cutter, saw blade milling cutter, wafer cutter, end milling cutter, and various forming milling cutter for machining various parts.
Q:There is no elevator on the 7th floor of the home to install a lift or lift
Comrade as an ordinary elevator work I tell you, the guerrillas installation of lifts is commonly used or is directly discarded ladder refurbished, safety exist great hidden trouble. If you see your family's life as a game, you can take a baidu elevator and install team.
Q:How to maintain the platform?
The platform comes in many forms: a, hydraulic. B, mechanical, etc. Hydraulic platform maintenance essentials: 1, to minimize the use of the rustbelt for safety and safety. 2, the joints should be lubricated regularly and lubricate. Regularly check for corrosion or damage to the top of the high pressure tubing and tubing. 4, the limit switch is maintained in good condition, not water or moisture. Always check the oil pump pressure and the oil gauge line. 6, check regularly for oil spills. 7, daily clean maintenance work.
Q:The hydraulic platform can't rise. Why?
The hydraulic platform and the control line are relatively simple, the hydraulic pump running at the point of rise will drive the oil hydraulic drive plunger up. Turn on the solenoid valve when the point is lowered. Be described in the hydraulic pump caused by dirt Chen Ji which reduces the pump fluid efficiency, hydraulic pump will be removed to clean the pump tablet, does not rule out the filtrate may be network jam.
Q:There are several reasons for the hydraulic cylinder oil leak on the elevator
Oil cylinder in and out tubing joint cracking; (I've seen a lot of this in practice.) 2) the sealing damage of the piston rod with the piston rod is caused by the pull of the piston cylinder. 3) cooperate with cylinder liner piston rod out end seal is damaged, this is caused by long-term use of seal aging more, also has a lot of end cover on is too hard to seal extrusion is damaged, there is a lot of domestic manufacturer of hydraulic cylinder design is not reasonable cause (mostly in order to save costs)
Q:What is the phenomenon of the worker's transport of wood using a lift
Imobile elevator accessory device can be configured for any combination, such as lifting capsules can be used with the inward and outward transportation equipment, make fully automated conveying process, operators need not enter the elevator, so as to ensure the personal safety of operators, and can realize the goods transport between floor, to improve the production efficiency; Electrical control mode; Work platform form; Dynamic form, etc. Limit the function of the elevator to achieve the best use effect. Imobile elevator optional configuration of hydraulic power, convenience and the surrounding the lap joint of frame, roller rolling or motor, prevent pinches safe touch, organ type safety guards, moving or motor rotary worktable, hydraulic flip table, to prevent falling elevator safety support bar, stainless steel security guard network, power system of electric or hydraulic elevator walking, mesa of ball. A stationary lift is heavy in weight. It's not affected by the environment.
Q:What is the difference between elevator and elevator platform and high-altitude platform
The elevator will use the motor to reverse the deceleration and pull the cable to lift the basket. The platform, like the high-altitude operating platform, USES hydraulic oil to pressurize or unload the platform. High altitude (pinyin: gao kong zuo ye) refers to the work performed at a certain location on a high level. National standard GB 3608-2008 "high job grading" regulation: "where in the fall for more than 2 m height datum (2 m) to operate the heights of the likely to fall, are called high homework." According to this rule, the scope of the construction industry is quite extensive. When working in a building, operate on a shelf above 2m.
Q:Is there a replacement for similar elevating functions?
Some machines, if not mass-produced, become products, may not have a generic name, The unit may design a machine based on its own needs Your picture is related to the tyre. Can you say you want to use this device?
Q:What is the hydraulic platform driven
Choose an electric motor or internal combustion engine based on load and situation
Q:How is the lifting handle of the universal knee-milling machine very tight
Maybe it's too tight.I hope my answer will help you.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range