Q:What are the requirements for vibrating concrete with vibrators?

The insertion point should be evenly arranged, the spacing can not exceed 1.5 times the radius of the vibrating rod, and the distance between the vibrating bar and the template is 0.7 times the radius of action.

Q:What kind of vibrating method is used in the process of column concrete vibrations?

And the step of dehumidating the concrete mixture discharged into the pouring compartment.

Q:What is the effect of concrete vibrations?

Because it is necessary to remove the bubbles in the concrete, tamping, so that the concrete dense combination of concrete to eliminate honey and other phenomena.

Q:What is the range of concrete vibrating rods?

The upper concrete is to be carried out before the lower concrete is initially primed

Q:What are the concrete vibrators?

Vibrator, attached external vibrator, flat surface vibrator and vibration platform, and other four categories.

Q:What are the concrete ramps?

Each point of vibration time to 20 to 30 seconds is appropriate, the general surface of the concrete was horizontal and uniform slurry and no longer so far, no significant subsidence, that has been vibrant, you can stop the vibrator.

Q:What are concrete vibrating machines?

The vibrator should not be larger than the working radius of 1.5 times; the vibrator distance template should not be greater than 1/2 of the radius of the vibrator; the vibrator should avoid collision with steel bars, stencils, cores, rings or embedded parts.

Q:What are the vibrations of cast-in-place concrete slabs?

1, the use of plug-in vibrator vibrating concrete, the plug-in vibrator moving distance should not be greater than 1.5 times the radius of action of the vibrator, and insert the depth of the lower concrete should be 50mm; 100mm, and the side should be

Q:Concrete vibrations is not divided into artificial and mechanical two?

external vibrator, shaking table and so on. Internal vibrator working mechanism: internal vibrator and surface vibrator is mainly

Q:What are the concrete equipment for vibrating machinery?

Internal vibrator (also known as plug-in vibrator) for large concrete foundation, columns, beams, walls and thicker plates and prefabricated components such as tamping, the reinforcement is particularly dense or very thin structure and components