LED PAR LAMP PAR 30
- Ref Price:
-
$4.00 - 5.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED PAR LAMP PAR 30
General Introduction of PAR LAMP
White Surface E27 Base Plastic Lamp Par38 Led Bulb
Specifications: | |
Bulb | PAR30 |
LED Counts | SMD LEDs |
Lamp type | LED Warm White/Neutral White/Daylight |
Light Output | 1200 Lumen |
Beam Angle | 25° |
Body Materials | Plastic with Aluminum inside |
Voltage | AC90-250V |
Wattage | 15W |
CRI | 80 |
Life Span | 30000hrs |
Primary Application | Indoor Floodlight/reflect lamp |
DIMENSIONS | |
Maximum Overall Length (MOL) |
|
Bulb Diameter (DIA) | |
Special Features not for use on dimmers | |
Feature of PAR LAMP
-PC lens with high light transmittance
-Aluminum heat sink with special technology on surface for cooling
-No screws design and un-disassembled
-Long lifetime 25,000 Hrs,2-years warranty
Switch off the electricity replacing the lamp.
Keep a way from direct sunshine and high temperature.
Be good at heat-releasing
Highly shock and vibration resistant
FEATURES OF PAR LAMP
FAQ:
Why choose LIGHT fom CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED Light ?
A: Instant
Q:What is the Power Factor of Led Bulb ?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI 65 (OPTIONAL 70RA, 80RA )
Q:What is the beam Angle?
A:270° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:Which Kind of mount installation you can offer ?
A: Recessed type and Surfaced mounted Type
Q: How Long of Warranty
A: Minimum 2-3 years, and upto 5 years
- Q:Would the LED light clothes according to rub off
- LED cold light source, he is heat conduction through the aluminum base plate to the radiator to send out, so there is no any things according to rub off the idea
- Q:What about a three-male led light?
- Also, the main strengths is the electronic ballast and matching lamp plate bracket tired engineering lighting products. 2, the LED lamp is to use leds as a light source to shoot the light. Traditional lamp used more halogen lamp, luminous efficiency is lower, more power consumption and environment temperature rise by illuminate, service life is short. LED light source on the luminous principle, energy-saving, environmental protection level are much better than traditional lighting lamps and lanterns. And LED the unidirectional formed to shoot the light distribution of the perfect support.
- Q:What clothing store LED lamp, LED lamp can choose?
- 1. The lamp is placed near the ceiling upper or furniture, also may be placed on a wall, dado or play crural line, the light immediate illuminate is on the items to be highlighted implements, to highlight the subjective aesthetic effect, to highlight atmosphere and unique environment, abundant, rich and colorful artistic effect; 2. Shoot the light is downy, elegant, can play a leading role to the overall lighting, and local lighting, foil atmosphere. 3. Shoot the lamp to save electricity: shoot the light reflectors with powerful function of refraction, around 10 watts of power can produce strong light; 4. Shoot the lamp to be concentrated: concentrated light, can highlight or emphasize a particular object or space, adornment effect is obvious; 5. Shoot the lamp to be comfortable: shoot the light color close to natural light, the light reflection 'to metope, not dazzling; 6. Shoot the lamp to change more, can use a small bulb project make a different effect
- Q:LED lamp is not lit, how repair?
- 90% is probably the main step-down capacitance is broken, is the middle of the big red, a dollar or so. As for the diode and the probability of electrolytic capacitor bad within 10%, the multimeter amount is known.
- Q:How can you make the led lamp not dazzling
- Into visible light solid state of semiconductor devices, it can be directly put DianZhuan into light. The heart of the LED is a semiconductor chip, chip attached on a bracket, at the end of the end is negative, the other end connected to the power of the anode, the whole chip is encapsulated by epoxy resin. Semiconductor chip consists of two parts, one part is a p-type semiconductor, dominated by holes in it, the other end is n-type semiconductor, here is mainly electronic. But this two kinds of semiconductor connected, forming a p-n junction between them. When a current flows through a wire to the chip, the electron will be pushed P area, electron and holes in the P zone compound, then will be issued in the form of photon energy, this is the principle of LED light. And the wavelength of light was the color of the light, is determined by the formation of p-n junction material.
- Q:How do I get the light
- Shoot the lamp to generally have a lamp holder, transformer, lamp cup plug into the socket, lamp holder line received 12 v low voltage output from the transformer online, on the other side mark 220 v line and zero line. Under normal circumstances, the power supply lines to diameter need to match, according to the total wattage lamp don't overload, easy to cause line heat causes fire hazards. As for the integrity of the design and decorating can such as first place, and where there is injury can mend the great white, scratch putty in general. (this is simpler, prevent the remodeling of large area)
- Q:Tube lamp, metal halide lamp, lamp, LED lamp, the difference between more than advice please!
- Metal halide lamp is astigmatism metal halide lamp's color is better than to shoot the light So the metal halide lamp foil effect is better than to shoot the light Is common in commercial lighting LED a lot of kinds of condenser and astigmatism. In the domestic. Than normal because of the price of the LED energy-saving lamps. Price difference is very big So now not used in common ordinary lighting.
- Q:The luminous flux LED to shoot the light, technical parameters, MR16 GU10, chips and other parameters
- LED shoot the light cup MR16 voltage: 12 v, 3 x1w flux: 240-300 LM this is to see what is the single light bead chip size to LM, like 45 ml 112 LM chips do no problem, then flux have 312 LM, GU10 voltage can be done as required.
- Q:The LED lamp mainly used in what place
- LED lamp is mainly used for decorative lighting, commercial space and building decorative lighting, etc., with the development and progress of LED technology, the market of LED lamp performance advantage is very outstanding, high purity aluminum reflector, the beam is the most accurate and reflective effect is best; Symmetrical narrow Angle, wide Angle and asymmetric light distribution system, and the projection lamp with scale plate, people can according to the calibration convenient to adjust the irradiation Angle. In addition, in order to facilitate maintenance, LED projector lamp adopts open behind replacement bulbs. Excellent decorative lighting effects, LED project-light lamp can realize the gradient, jump, color flashing, random, alternating gradient and chase, scan and other dynamic effect. LED projection lamp and LED underwater lamp, LED buried lights, LED wash wall lamp, etc. Can be used independently, also can be used alternately, which result in more volatile, and LED projection lamp is mainly used for monomer architecture, historical buildings exterior lighting, landscape lighting, building outside light through lighting, billboard lighting special facilities such as lighting, lighting and bars, dance halls and other places of entertainment atmosphere, such as market development prospects.
- Q:Does the background wall light 3 watt led enough
- 3 watts also enough, almost look like, if you like the brighter or metope color is suitable for higher brightness can also be adjusted wattage and see which is more suitable.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
LED PAR LAMP PAR 30
- Ref Price:
-
$4.00 - 5.00
/ pc
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
