CSD-250 Cutter Suction Dredger
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
u This cutter suction dredger is designed to operate in sheltered inshore waters and under tropical climate conditions. Build under enterprise standard with reference to ZC standard.
u She is of all welded steel construction ,bottom plate 8 mm thickness and shell plating 6 mm thickness, frame distance 500 mm, with 2 fixed spuds on the aft ,ladder support A frame in the front and 3 hydraulic operated winches ,2 double bollards(fwd and aft) and 1 single bollard in the center on each side.
u The whole dredger is dismountable in road transportable sections.
u The engines and dredge pump are located in the center pontoon, the 2 side pontoons serve as fuel bunkers, ballast tanks and store.
u Engine room and pump section are accessible by watertight hatches
u Cutter shaft runs on roller type bearings in an enclosed shaft housing flooded with lubrication oil a lock oil tank to ensure a positive pressure inside the bearing housing is located on top of the wheelhouse.
u The spacious control cabin is ergonomically designed fitted on a raised platform with all around non obstructed view ,2 operators consoles containing engine instrumentation and controls for winches, dredge pump, suction and discharge pressure gauges, navigation light controls, airconditioned and well insulated .
u Below the control cabin is a changing room located with table, chairs and washbasin
u The underwater section of the dredger is protected with a marine coating system and cathodic protection for use in a saltwater environment。
TECHNICAL SPECIFICATION CSD250 | |||
No. | Item | Description | Remark |
1. | General Principle |
|
|
| (1). Overall Length | 26m |
|
(2). Side Pontoon Size | 17m |
| |
(3). Main Pontoon Size | 11.0m |
| |
(4). Breadth | 5.2m |
| |
(5). Moulded Depth | 1.6m |
| |
(6). Mean Draft | 1.0m |
| |
(7). Dredging Depth | 10m |
| |
(8). Pumping Distance | 1000m |
| |
(9). Pump Flow Capacity | 1400m³/h |
| |
(10).Suction Pipe Dia | 350mm | Out Diameter | |
(11) Discharge Pipe Dia | 350mm | Out Diameter | |
|
|
| |
2. | Main Pontoon |
|
|
| (1). Dimension | 11m*2.2m*1.6m |
|
(2). Bottom Plate Thick | 10mm | ||
(3). Side Wall Thick | 8mm | CCSB marine plate | |
(4). Front and Rear | 14mm | CCSB marine plate | |
|
|
| |
3. | Side Pontoon |
|
|
| (1). Dimension | 17m*1.5m*1.6m |
|
(2). Bottom Plate Thick | 8mm |
| |
(3). Side Wall Thick | 6mm |
| |
(4). Front and Rear Thick | 6mm |
| |
|
|
| |
4. | Main Engine |
| Drive dredger pump only |
| (1). Make | weichai |
|
(2). Model | 8170 | Marine Engine. Cummins is optional | |
(3). Power / rpm | 601Kw @ 1500 rmp |
| |
(4). Fuel Consumption | 85L/h |
| |
(5). Cooling Style | Water Cooling |
| |
|
|
|
|
6. | Axle Generator |
| Driven by auxiliary engine |
| Make | STANFORD |
|
Power / rpm | 24Kw |
| |
|
|
| |
7. | Harbor Generator |
| Drive hydraulic pump & axle generator |
| Make | WEICHAI +STANFORD |
|
Power / rpm | 24Kw |
| |
Fuel Consumption | 4L/h |
| |
Cooling Style | Air Cooling |
| |
Output Voltage | 220V/ 380V |
| |
|
|
| |
8. | Dredge Pump |
|
|
| Make | SHIJIAZHUANG |
|
Model | 250G-G |
| |
Suction Pipe Diameter | 300mm |
| |
Discharge Pipe Diameter | 250mm |
| |
Head | 65m |
| |
Rpm | 650rpm |
| |
Water Flow Capacity | 1200m³/h |
| |
|
|
| |
9. | Gearbox |
|
|
| Model | L620 |
|
Ratio | 2 : 1 |
| |
|
|
| |
10. | Cutter |
|
|
| Style | Hydraulic Motor+ Planetary Gearbox | |
Cutter Power | 60kw |
| |
Crown Diameter | 900mm |
| |
Cutter Out Diameter | 1000mm |
| |
Blades | 5pcs | High manganese alloy | |
Cutter Teeth | 33pcs | High manganese alloy | |
Rpm | 0-10-30rpm |
| |
|
|
| |
11. | Ladder Winch |
| Hydraulic Drive |
| Winch Motor Brand | XINHONG | Sino-Italy Joint Venture |
First Layer Pull | 4 Ton |
| |
Wire Rope Dia | 18mm |
| |
Wire Rope Capacity | 120m |
| |
Wire Speed | 0-20m/min |
| |
|
|
| |
12. | Swing Winch |
| Hydraulic Drive |
| Winch Motor Brand | XINHONG | Sino-Italy Joint Venture |
First Layer Pull | 4 Ton |
| |
Wire Rope Dia | 18mm |
| |
Wire Rope Capacity | 120m |
| |
Wire Speed | 0-20m/min |
| |
Quantity | 2 sets |
| |
|
|
| |
14 | Spud |
|
|
| Length | 13m |
|
Diameter | 325mm |
| |
Weight | 2200Kg | Each | |
| |||
15 | Spud Cylinder |
|
|
| Cylinder Stroke | 2.0m |
|
Cylinder Dia | 140mm |
| |
Working Pressure | 16Mpa |
| |
Travel Speed | 0.2m/s |
| |
| |||
17. | Anchor |
|
|
| (1). Type | HHP Anchor |
|
(2). Weight | 300Kg |
| |
| |||
18. | Operation Cabin |
|
|
| (1). Operation Board | Control all dredger movement commands and monitor equipments running condition. PLC system from SIMENS | |
(2). Adjustable Chair | For dredger master. Leather. |
| |
(3). A/ C | One set |
| |
(4). Lounge | First floor cabin has space for two persons rest. | ||
| |||
19. | Hydraulic System |
|
|
| A. System Introduction | Hydraulic system is designed to supply power for winches, cutter, spud cylinder. Hydraulic pump separately is driven by engine free end.
| |
B. Hydraulic Motor | From Sino-Italy Joint Venture, YINING. Excellent working performance and durable usage life. | ||
C. Hydraulic Pump | NANJING | ||
| |||
20. | Painting Principle |
|
|
|
Introduction | Do sand blasting before welding. Use good quality marine paint with greater thickness. Paint system is 3 or 4 layers with minimum thickness of 400 micron on the below water line area | |
| |||
19. | Electrical System |
|
|
|
Introduction | All electrical components are from famous brand as Omron and CHINT. Equip overload protection box to control safety. Use high quality electrical marine type cables (smoke and halogen free). | |
20. | Navigation Tool |
|
|
| (1). Elec-mag Compass | Equipped |
|
(2). VHF-Radiotelephone | Equipped |
| |
|
- Q:How much dredging can the 4000 side /h suction dredge dredge in one day? Soft silt
- The pump in the cabin and the underwater pump are full load. The length of the pipeline is within 3 kilometers, and the depth is about -16 meters. According to the rate of 18 hours per day, the production rate is 61200 according to 3400.The actual amount should be between 45000 and 55000.
- Q:The working principle of a trailing suction dredger
- Loading trailing suction dredger, basically is a kind of from the seabed dredging ship, the dredging method and vacuum cleaners.
- Q:3800m3 cutter suction dredger
- Should be the hour efficiency of 3800 cubic meters, 3800 cubic meters of water or flow, I feel your problems are wrong, some 3800 type dredger, Holland IHC company, but refers to the total installed power. So I think it is type 3800, not 3800M3.
- Q:Does dredging dredger need relevant qualification?
- But if the local government regulations must be legitimate formal dredging project, estimated to need to apply for a ship's certificate, it is equivalent to a person's identity card! If you need Qingzhou Wynn mine, you can go through the whole process, the relevant costs to consult manufacturers.
- Q:Who knows what's the name of the biggest dredger in China?
- Guangzhou Waterway Bureau has the largest grab ship, the maximum bucket capacity of 50, but the efficiency is not as good as the Shanghai Waterway Bureau fighting capacity of Xinhai 27 party round clam.Most of the ships I've seen before, as well as a dredge called a chain bucket dredger, are now out of date.
- Q:What are the crew members on the dredge?
- The tonnage of dredger is large and small, and the dredging method is also divided into many kinds, so it can not be generalized.
- Q:What is the working principle of a cutter suction dredger?
- Adjust the transverse retractable cable winch, traverse speed and stop, to change the movement speed and cutting cutter position change in different sections. The mud pump is then pumped through the sludge line and the muddy water mixture is delivered to the designated blow in area. The cutter suction dredger by dredging machinery and equipment according to the design requirements of the excavation dredging area of rivers and lakes, and the dredged material through the mud pipeline transportation to dike back water side with fill; it is conducive to the expansion of cross-section, and it helps to prevent the foundation piping failure. It has been widely used in river and lake dredging works.
- Q:Who has the construction plan of dredger dredger after dredger dredging and dredging with dredger barge?
- Would dig into the mud barge, barge by suction dredger, using force pump suction dredger through pipelines on shore
- Q:Classification of trailing suction dredgers for trailing suction dredger
- Trailing suction dredger is one of suction suction type. It sucks in mud by raking the head of the two side of the ship's hull or at the tail to work with mud and side navigation. Is the use of mud rake scarification, boat design sediment tank, tank volume said the size of the ship. A single to rake or harrow, are arranged on the ship or on both sides. Suction dredger is flexible, high efficiency, strong wind waves, suitable for coastal ports, the wide river and ship anchorage operation in large waves and without the cover of coastal and estuarine areas, should choose the self-propelled trailing suction dredger. Soil works suitable for loosening and less than clay hardness. The self-propelled boat is equipped with a mobile power unit (paddle machine) to drive the dredger.
- Q:The famous type of cutter suction dredger
- The famous famous suction dredger is China's sky whale, (Tianjin River Navigation Bureau), sky Navigation Bureau, 5000kW and so on. At present, the world's largest is Luxemburg, Jan, De, Nul dredging group JDN8069.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
CSD-250 Cutter Suction Dredger
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords