Q:Please use LED lamp beads with other lamp beads is not the same?

It is nonsense, misleading, the landlord said principle two lights are the same, just as there is a single lamp, open circuit protection, but can not reverse voltage higher than the manufacturer's logo. For street lights, open circuit protection is integrated into the drive circuit,

Q:What's the reason why the LED street lights don't work?

The LED lamp power is waterproof power, bad to change new power protection function is not perfect, directly affect the quality of fault phenomenon LED lamp 2, bad part there are several possibilities: 1), such as LED lighting power supply for multi-channel constant output, which may be a group of bad, 2) is LED chip is not good, or is the LED lamp cooling caused by bad burn LED chip.

Q:Will the wisdom of street lamps be the future of development? At present, which is more reliable?

The wisdom of street ideas from the top-level design smart city architecture, post comprehensive functions are dependent on the wisdom of the street lamp intelligent, on the basis of the original city public infrastructure, through a combination of 4G/5G and WIFI micro base station equipment, sensors, video surveillance, RFID, public broadcasting, intelligent lighting, information release, charging pile multi function module, build intelligent interactive module, build intelligence network, for the construction of smart city data collection and provide intelligent services, help to promote the construction of new smart city.

Q:Can the LED power supply be used as street light power supply?

First of all to his high efficiency, high efficiency loss can be reduced, the PF value is higher than 0.96, the rate of loss is greatly reduced and the components, and there shall be 4 in one PWM dimming, dimming, 1~10V dimming, dimming dimming and resistance time

Q:LED technical requirement of street lamp 100W

(5) the environmental temperature of LED street lamp should be -20 to +50 centigrade, and other special requirements such as temperature, humidity and corrosiveness of the local environment should be satisfied.(6) the power factor is greater than or equal to LED 0.95 lamps, lamp power supply efficiency is more than 95%.(7) the working voltage range of LED street lamp is from 85V to 265V (in this voltage range, LED lamps can still work normally).(8) LED street lamp has surge suppression performance (against lightning stroke), the input over-voltage protection, when the voltage is restored to normal, can resume work.

Q:Will LED street lights affect cable signaling?

Maybe there is a high frequency circuit or a spark in this street lamp. In short, as long as it really interferes, the quality is not up to standard or the installation is not qualified

Q:LED street lamp or solar street lamp?

If it is a simple solar light and general lighting than, it is recommended to use general lamps. To tell you the truth, the electricity charges in the province are simply not enough to invest in maintenance and renovation. Therefore, many public facilities of solar energy lamps are bad, because the maintenance and replacement costs are too high.

Q:What is the reason for the low power factor of LED street lamp?

What you said is not too clear, the general LED is to drive the switching power supply, switching power supply method of improving power factor is to increase the power factor correction circuit, power factor correction circuit is more than 50W, can play a role. The LED street light power is generally more than 100W, if the power factor is low, it can only show that its driving power supply, there is no power factor correction, or is not done well. Well done, it should be more than 0.95There is no power correction circuit for the driving power of the first paragraph

Q:How to maintain the LED street lamp?

LED is best used within 3 months of its original packing condition to prevent the stent from rusting. When the LED bag is opened, it should be used as soon as possible. At this time the storage temperature is 5 degrees -30 degrees centigrade and the relative humidity is below 60%.

Q:Method for connecting cable between street lamp and street lamp

Better keep. A breakpoint is produced. First, the operation cost increases, the middle head is needed, and the two is the maintenance cost increase. A breakpoint is a maintenance point.