SMD 5050 flexible led strip with CE ROHS
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1.Great advantages of the flexible strip:
-eco friendly
-long life span standard warranty 3 years
-complete cut / connection accessories
-no need of constant-current power feed
-low power consumption
-custom packing
-white and warm white interlaced arrangement
-CCT can be adjusted, wider CCT range
-can display several changing patterns with a controller and remote
2.Applications of the flexible strip:
-Cove lighting
-Architectural lights for canopy, corridor, window, archway
-Backlight or edge lighting for signage
-DIY lights for home use
-Path and contour marking
-Decorative lights for holiday, event, show, exhibition
3. Features:
1.Connect with DC12V power supply, which can connnect several LED flexible strips in series.
2.Adopt excellent flexible PCB material to apply to various shapes' installation, the flexible PCB could be in white,yellow,black.
3.The max. power of single color product: 7.2 W/M, the max. current: 600 mA/M. The max. power of RGB product: 6 W/M, the max. current: 500 mA/M.
4.The series could be customized to be waterproof LED strips(IP45,IP67,IP68,etc.) according to customers' requirements.
5.Lifetime:50000 hrs.
4. pictures
5.Our service:
1.Your inquiry related to our products or prices will be replied in 24hours.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3.OEM&ODM, any your customized lightings we can help you to design and put into product.
4. Monthly output over 800,000 meters
- Q:Led how to install the light belt?
- Please don't light the band when the 1.LED light is in a roll.2., only on the lamp belt with a scissors mark on the body to cut, otherwise it will cause a unit is not bright.3. installation, please bring light bent to one side, exposing the 2-3MM copper wire, and wire cutters cut clean, there shall be no burr, avoid short-circuit.
- Q:Led how to install the lamp belt, LED lights with the installation process detailed
- Do not use the power supply during the installation or assembly of the lamp belt. Only the connection, installation and the correct condition can be used to connect the power supply,
- Q:My living room, I do not want the ceiling can use LED lights? How can we install it?
- First, punch the holes on the top, fix the panel, or screw it.
- Q:How does the LED light band connect the dimmer controller?
- The LED light belt needs to be connected with a drive with dimming function. This can be connected to the dimming controller via the signal line.
- Q:Does the LED belt need 3C certification?
- LED lights belt does not need to do 3C certification, if you want to do domestic certification, you can do CQC certification, if you have drive sales, then the purchase has 3C certified LED driver on it
- Q:Can the 220V LED belt be transferred to the 12V on board?
- If you have a little electrical knowledge, the 220V lamp is divided into 20 sections, the 20 section light into parallel form, and remove the LED light input part of the rectifier part (circuit AC to DC), directly to the 12V DC voltage on it. In fact, LED 220V lights, is the 220V AC into 300V (the voltage is not certain, some have a buck, there is a full wave rectifier could reach 380V DC DC), added to the N series of LED lights, as long as you have this clear voltage on the line; because the working voltage of LED lamp the DC and DC voltage of single LED light value is generally between 2.7V~4V.
- Q:The difference between high voltage and low voltage LED light belts
- Low voltage lamp with 12V and 24V, 12V low voltage work, step-down instability, leading to the front and rear light uneven.24V step-down stabilization. Uniform brightness. Long service life. It is recommended to use 24V light belt.
- Q:Is the LED belt safe?
- This line is best not to do any extension treatment, the cut may be thin after the good connection, you can extend the plug in front of the power line well. No-load voltage is not allowed, as long as the lamp can be used normally, do not measure it.
- Q:Home decoration, lights band 5050 and 3528 what is the difference?
- 5050 lights with more than 3528 large beads beads and chip material is good, so the 5050 light weight with the stronger, but the market price is more expensive. And although the 3528 lights are not 5050 bright, but can also be used in home improvement.
- Q:What is the minimum number of light bands?
- General LED lamp belt is 12V, 3 beads and a resistor in series, a lamp minimum starting voltage of about 3V, almost 3 9V, although it is lit up, but the brightness is very low, want to achieve higher brightness or to 12V, then 9-12V lamp belt between the lights. Of course, some factories also have 24V, and the same principle.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
SMD 5050 flexible led strip with CE ROHS
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
