Q:LED lights with warranty period

LED lamps are guaranteed for two or three years, especially for high power LED lamps, which generally have a three year warranty.

Q:How much voltage can the LED lamp withstand?

LED lamp needs constant current driver, single wick turn-on voltage from 2.8V to 3V, and work for a period of time after the temperature rise, the value will be reduced, the lamp is a lamp wick composed of series parallel, because the number of different series, so the voltage is different, when the current basic variable voltage variable.

Q:What is the difference between T4 tube and LED lamp? What are their advantages and disadvantages?

T4 tube is fluorescent three primary color lamp tube. It has a diameter of 12MM.

Q:Led how should I choose the light belt?

Bending, the lamp strip on the finger, normal is also the normal light, the folded into this lamp or camber resistance weldingSaid so much, hands are tired, I hope to give a high praise

Q:What do you mean by "LED" belt model 5O5O and 3528?

This means that the LED chip is enclosed in a bracket and the dimensions of the stent. 5050:5mm*5mm; 3528; 35mm*28mm. Just structure size.

Q:LED what's the color of the light belt?

The LED light source can use red, green and blue three color principle, in computer technology under the control of the three colors with 256 gray scales and arbitrary mixed, can produce 256X256X256 (16777216) colors, combination of different colors. LED combination of light and color is changeable, can realize rich and colorful dynamic change effect and various images.

Q:Which is good for low voltage lamp belts 5050 and 3014?

Power connection method: LED lamp belt voltage is 12V DC, so it needs to use switch power supply, the power supply size according to the power of LED lamp belt and connection length to decide. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, also extended) unified by the total power switch. The advantage is that it can be centrally controlled, which is not convenient. It can not be achieved with the lighting effect and switch control of a single LED light band, which can be measured by itself.

Q:LED lights with lights, some light, and some light, or in the middle of a section will not light

Does the length of a section of lamp belt exceed the standard? No problem under 20 meters.

Q:How many watts does the LED light have?

The band of lights in your picture is high voltage 220V's 5050 meter 60 lamp band. In theory, one meter is 14.4W, but the actual measurement is not so much.

Q:Can different color LED lights come together?

1) Yes, as long as the conventional 5 meter roll of light bars, the voltage is DC 12V, can be connected together;2) just the color of the light bar is different, the color after the light is not the same, depending on your actual needs;3) the same power cord in series together with the light bar, the longer the connection, the back is not bright, generally not more than 2 volumes as well.