Item specifice:
| Color Temperature: |
Warm White |
IP Rating: |
IP65 |
|
, |
| Power（W）: |
12 |
Lamp Body Material: |
Aluminum |
| |
Product Description:
Product Description
| Size | 1000mm |
| Color | RGB |
| Voltage | DC 24V |
| Power | 30W |
| Control | DMx512 |
| DMX Channel | 3 |
| Diffuser | Clear |
| Cable Entry | Side&Bottom |
| Base | E27 |
| Operating Temperature | -20~60 |
| IP rate | IP65 |
| Warranty | 3 Years |
Product Pictures
Technical Drawings
Workshops
Machines
Our Service
1. Your inquiry related to our products or price will be replied in 24hours
2. Well-trained and experienced staff to answer all your inquiries in fluent English.
3.OEM & ODM, any your customized lightings we can design and put into product.
4. Distributor shop is offered for your unique design and some our current model.
5. Protection of your sales area, ideas of design and all your private information.
- Q:Will the LED bulb, T8, T5 lights, radiator lamps, is the hotter the better? What's the regular temperature? What are the common heat release materials? Specifications?
- Of course, the hotter the better, because for the same material, the hotter it is, the more heat the LED chips use, the less good the quality of the chips. The thermal characteristics of lamps is mainly to measure the junction temperature of LED Shenglai rather than the temperature of heat sink. Aluminum is commonly used in heat dissipation materials.
- Q:How to identify Ic constant current LED bulb?
- Look at the power supply, there are a few simple electronic and capacitive circuit board, it is not constant flow, cross flow is larger, so understand? Cross flow IC, that is, the meaning of intelligent voltage regulator, so that the LED is not easy, bad capacitor driven LED is relatively easy to damage, easily breakdown, and power consumption than the cross flow
- Q:Led the bulb is flashing. What's wrong with it? How do you fix it?
- The general power supply too much heat to stimulate the overheating protection function itself with the power supply, power supply is a protection device, when the heat is too large, may cause it has an adverse effect on power and light, power will take the initiative to make the lamp power, rest, fully dissipated heat later. Bright. So, this is the power overheating protection at work. It will not be the case if the outer shell is enlarged or the room is ventilated and the heat should be cooled.
- Q:What is the 15 Watt lumen of the LED bulb?
- In general, every W is 60 to 100lm, the average is about 80lm, 15W is about 1200lm
- Q:In a bulb, the ambient temperature of the LED is LED, the temperature of the air in the bulb, or the temperature of the aluminum substrate
- LED working environment temperature refers to the temperature of the air in the LED bulb, not the temperature of the aluminum substrate. The temperature of the aluminum substrate will rise as the LED lights up, and rise to a certain extent, which will involve the highest environmental temperature.
- Q:What does the LED bulb patch mean?
- The patch is referring to the lamp is put up, refers to the non patch lamp is plugged in, the distinction is probably a stick is inserted.
- Q:LED thread specifications for bulb bulbs?
- Specifications also include bulb, E27, E26, B22, E14, G10, E40;E27 specifications are in the majority.
- Q:Seeking the production process of LED bulb... Thanks
- First of all, of course, the preparation of materials, the specific operation of the lamp to practice, each lamp has different methods of assembly, there are different work instructions. Only through practice can we write good and practical processes. Figure is a flow chart of MR16 assembly.
- Q:What's the difference between a glass cap for a bulb and a PC hood?
- Weight comparisonPC specific gravity 1.2,The proportion of glass (usually glass) is 2.5,That is to say, PC is lighter in weight than glass.
- Q:LED bulb after the power failure, still glimmer, can last hours or even all day, what is the reason?!
- If it is to continue the glimmer of minutes, the main side is the use of resistance and step-down circuit caused by the normal phenomenon. It's very rare for the factory to use this old model to make LED balls. Circuits that run for hours or all day on the side of the LED bubble are out of order. It's not normal to shine for so long. Now most of the LED bulb is using IC constant current supply circuit, no such situation has emerged.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
