led street light solar street lighting street light
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
▲Adopt imported LED luminous chip,which has no ultraviolet ray and infrared ray with a higher light efficiency and more stable.
▲Adopt three cavity cooling,sealed by high thermal conductivity LED,which can effectively reduce the thermal resistance of lamps.The chip junction temperature can be controlled below 60,ensuring longer working life of lamps.
▲Use high thermal conductivity aluminum radiator.Surface is coated the anti-corrosion superconducting hot-metallic paint,which can ensure that the heat from LED light source escapes faster.
▲Use voltage constant current drive of AC wide voltage input, which has high power factor and low harmonics.
▲The whole light source is combined in the form of module ,which can be arbitrary assembled and transform the overall power of lamps.
Apply to the lighting places,such as expressway,main road,secondary main road,branch and factory/enterprise etc.
We are a diversifide holding company,there are 8 strategic business units,6 real enterprises and more than 1000 staff in Yichang Technology.Yichang intelligence.Yichang Lighting and Xinping Electronic are three prominent components of Yichang Technology which leads the development of the industry.
The production base of Dezhou in state-level economic and technological development zone-economic and technological development zone of Dezhou,the geographical position is superior,the traffic is convenient,It occupies 120000 square meters and more than 500 staff,more than 100 are researchers and 30 with Senior professional title.
Based on technology research and development of Hangzhou and Germany,the cooperation has jointly set up product research and development labs with Shandong University,Tianjin industry University,Peking University and Chinese Acaderny of Sciences.It has also established the production,learning and research base on intelligent systerm and LED lighting ,bringing together the industry's elite.As the same time,company sets up operation centers in Beijing,Shandong,Jinan,Hangzhou,Xi'an,Chengdu and Guangzhou,and sales and service network is all over the country,Meanwhile,it is the member of National Semiconductor Lighting Project Research and Development and industry Alliance,as well as member unit of China Lighting Association.
Now,the company has certifications ISO9001,ISO14001 and the products have certifications RoHS,CE,3C and CQC,we have the city and road lighting engineering contractor qualifications,obtained more than 20 national patents,is the only company that is granted by the Secretary for Commerce and industry with"Abide by the contract,Pay attention to credit"for many times,it is also the member of CSA.
The products that the company develop and manufacture are:mining lamp,project-light lamp,tunnel lightsm,grille lamp plate,the city power/solar street lamp,courtyard light,lawn lamp,tube,ball steep light and other LED lighting products ,intelligent gateway,intelligent socket,intelligent switch,intelligent dimmer module,intelligent control module,infrared transponder and intelligent system equipment.
- Q:Is the price of the street lamp factory in led the same?
- LED lights for their respective products factory price countries has not been unified, now rely on market regulation and macro-control and their purchase of LED street customer awareness of the product, the key is led lamps factory enterprise conscience.
- Q:The width of the road is 20 meters, the distance of the street lamp is 25 meters, and the number of tiles is led. How much is the pole?. How to calculate?
- General road light source is about 250W,If you use LED, there are enough 72---108W, but the earlier to buy more expensive lights, in terms of long-term interests, LED to energy-saving much more cost-effective.The lamp pole is 7----12 meters high and the distance is 30----45 meters.Zhejiang Yao Liang lighting specializing in the production of various types of outdoor lights.
- Q:Can the power supply for the LED street lamp be placed under the lamppost?
- In fact, it is more convenient to put the driver into the electric door directly. If the later stage needs maintenance, it is not necessary to remove the whole lamp.
- Q:How much is the LED street lamp?
- Should not be cheap, power 200W or so, the main driver expensive
- Q:How is the rated current of the LED street lamp holder?
- For example, the rated power of the lamp is 220W, the rated input voltage is 220V, and the power factor is 0.9Then the rated input current is 220W/220V/0.9=1.11A
- Q:Where are the batteries located in the installation of solar street lamps? Buried?
- The specific situation depends on the local decision. You are advised to use buried ground.
- Q:Solar LED street lighting industry prospects really so good?
- All may be bad, and the solar street lamp power is low, can not meet the lighting requirements. It is better to use the LED directly to connect the city power, and the savings of solar panels and batteries are less than the direct payment of the electricity, and the stability is better, and the maintenance is reduced.
- Q:400W high pressure sodium lamp can replace 150WLED lamp? Luminous flux?
- Yes, and under the current technical conditions, the life expectancy of HPS is much longer than that of LED street lamps
- Q:Street lights and signal circuit connections
- LED street light color light than many high-pressure sodium lamp, high-pressure sodium lamp color index is only 23 enterprise directory, while the LED lamp more than 75 of the color index, take into account the psychological point seems to be visually reachedThe same brightness, lighting LED lamp, can be reduced by an average of 20% or more, than high pressure sodium (refer to inluReasonable lighting standard); page 5, LED street light a small decline, a year decline was less than 3%. 10 years still reached the road soHotel and illuminance requirements, while the high pressure sodium lamp big drop, about a year has dropped by more than 30%, so, LEDStreet use power can be lower than that of high-pressure sodium lamp designs; page 6, LED streetlights energy-saving automatic control devices can be achieved in time to meet the situationLighting conditions, as far as possible to reduce the requirement of different maximum power saving energy; Guangyuan Wang Technology Co. Ltd.
- Q:Want to do a LED street lighting, do not know how to start, please recommend books or websites, can understand the whole process of doing LED street lights!
- You want to make street lights, that is easy and not easy, simple and simple, in fact, you want to see the manufacturer's demo assembly process on the Internet is impossible, because it relates to the confidentiality of the company. To see, you can go to the manufacturers to see, contact manufacturers business on it.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
led street light solar street lighting street light
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
