Product Description:
Product Name: High Efficent 4.0T Forklift Truck with Good Price
1. Specification
GENERAL INTRODUCTION | 1 | MODEL | | FD40B-W1 |
2 | POWER TYPE | | DIESEL |
3 | RATED CAPACITY | kg | 4000 |
4 | LOAD CENTRE | mm | 500 |
CHARACTERISTIC AND DIAMENSION | 5 | LIFT HEIGHT | mm | 4000 |
6 | FORK SIZE | L×W×T | mm | 1070×125×50 |
7 | MAST TILT ANGLE | F/R | Deg | 6°/12° |
8 | FRONT OVERHANG（Wheel center to fork face） | mm | 487 |
9 | GROUND CLEARANCE | mm | 140 |
10 | OVERALLDIMENSION | OVERALL LENGTH（Without fork） | mm | 2460 |
11 | OVERALL WIDTH | mm | 1150 |
12 | MAST LOWERED HEIGHT | mm | 1985 |
13 | MAST EXTENDED HEIGHT （With Backrest） | mm | 4030 |
14 | Overhead Guard Height | mm | 2070 |
15 | TURNING RADIUS (outside) | mm | 2170 |
PERFORMANCE | 16 | Speed | TRAVEL（Full load） | km/h | 19 |
17 | LIFTING （Full load） | mm/s | 490 |
18 | MAX. GRADEABILITY | % | 20 |
FRAME | 19 | TIRE | FRONT | | 7.00-12-12PR |
20 | REAR | | 6.00-9-10PR |
21 | WHEELBASE | mm | 1600 |
22 | SERVICE WEIGHT | kg | 3350 |
POWER AND TRANSMISSION | 23 | BATTERY | VOLTAGE/CAPACITY | V/Ah | 12/90 |
ENGINE | |
25 | MAUFACTURE | | ISUZU C240 |
26 | RATED OUTPUT/R.P.M | kw/rpm | 37/2650 |
27 | RATED TORQUE/R.P.M | N·m/rpm | 148/1800-1900 |
28 | NO.of CYLINDER | | 4 |
29 | BORE×STROKE | mm | 90×105 |
30 | DISPLACEMENT | cc | 2540 |
31 | FUEL TEAK CAPACITY | L | 60 |
32 | GEARBOX | TYPE | ELECTRICAL SHIFT/MANUAL SHIFT |
33 | STAGE | F/R | 1/1(2/2) |
| | | | | | |
2. Application
For Transporting Goods
3. Package
Put into containers.
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some 4.0T Forklift Truck according to customers request?
A4: Yes, we can produce 4.0T Forklift Truck according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:How wide is the internal-combustion forklift pass?
- How are you, answer your questions 1, the world's basic no 1.75 t forklift, if you want to fork up 1.75 t of the goods, suggest to choose 2 t forklift, different forklift brand turning radius and rectangular storage channel width is different, so please select the brand you want to use, and then find the corresponding forklift suppliers, to learn about their forklift parameters. (the second is the size of your goods also affect your right Angle stacking channel width, now the right-angle stacking channels provided by the forklift general standard pallet is 1200 mm * 1000 mm, so when asked forklift supplier, please provide the size of the goods) 2, the goods fork length selection is according to the goods, when a variety of goods, please? How long is the direction of the fork, normally enough. Unless your goods are very long. There are very few forklifts in the world with 1.75 tons of capacity, and you are advised to buy two tons of forklift. Your goods are raised to four meters, which is not a problem. 1, give you some advice in the warehouse with belong to the indoor environment, it is recommended to use electric forklift truck, there are 2 tons of electric forklift, can fork up your goods, please feel free to choose. Electric forklift is environmentally friendly. It also saves a lot of cost compared to internal-combustion forklift.
- Q:Is a forklift a special type of work
- It is a special equipment operator. It is not necessarily a special type of work.
- Q:What the forklift needs to be aware of...
- Seven, the driver at the fork, on-demand check goods fork spacing, load balance, make the two fork pallet fork deep under the load should be as much as possible, pay attention to the pallet fork pointed cannot meet any other goods; Use the smallest door frame to lean forward to stabilize the cargo and avoid slipping backward. The bottom of the cargo fork should be kept at 300 to 400mm. The forklift truck should be turned into a forklift when the driver's sight is hidden from view. When reversing the car, it is necessary to make a reverse signal, and the rear wheel has to pay attention to the swing of the car, the speed of the car should be steady, and the car and pedestrian should be observed before and after. Nine, driving forklift may not be the goods at the scene of the in and out of work or driving fork rises too high, pay attention to the above the presence of obstacles blocking, banned cargo moving in on the brakes and high-speed turning. No more than 30km/h will be allowed to drive a forklift in the main road of the factory, and no other road should exceed 20km/h. Keep a certain distance from the vehicle in front of you, and when you go forward, you should send a signal to pedestrians or vehicles.
- Q:What are the procedures for buying a forklift?
- Special equipment operator (original and photocopy); Product quality certificate (original and photocopy). Note: all copies need to be covered with the official seal.
- Q:What are the requirements for a forklift
- Forklift workers have conditions for both employers and employers: Recruiter: Industrial units that are lawfully operated and operated by relevant regulations; The forklift truck needs to meet the ISO/TC110 industrial vehicle standard.
- Q:Notice those items before the forklift
- Check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective.
- Q:Battery lift truck charging requirement
- Different types of charging machine output parameters are different, and the method should follow the instructions of the charging machine. The electric forklift truck. The wire and socket should be checked before electricity is damaged. If any damage is found, it should be repaired and replaced before recharging. 3, check whether the battery is intact and wiring are in good condition, and open the charging flap, observe the electrolyte is in accordance with the provisions of the liquid level height, add distilled water when necessary, the injection liquid level higher than protective piece of 15 to 20 mm advisable.
- Q:What if the forklift oil is burned and the oil is burned
- Gas in the tubing, not oil.Have you had electricity for half a day? Electricity is not enough,
- Q:What is the section 4 and 3
- The certificate of operation certificate and technical grade of forklift truck is issued by the bureau of quality and technical supervision, human resources and social security bureau.
- Q:Does anyone know what the anti-explosion forklift principle is
- Watson explosion-proof forklift truck quality is not bad, it is also one of the domestic rare good explosion forklift truck manufacturer Passed the national explosion-proof test, explosion-proof principle of specific can consult on Watson website, there will be a professional solution for you. The hope can help you..
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
