Factory Newest No Need Power Supply 110V/220V 60Leds/M Flexible Led Strip Light Strip Led Strip 5050
- Ref Price:
-
$0.52 - 2.06
/ m
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Meters m
- Supply Capability:
- 1,000,000 Meters Per Month m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
Factory newest No need power supply 110v/220v 60leds/m flexible led strip light strip led strip 5050
Specification
Voltage | AC100-120V or 220-240V (50-60Hz) |
Total Power | 500W |
Color | R/Y/B/G/W/WW/RGB |
Length | 50m/roll |
LED sources | SMD5050 |
LED Qty | 60pcs/meter |
IP grade | IP67 |
Cuttable unit | every 0.5 meter |
Lifespan | 35,000 hours |
Warranty | 2 years |
Certifications | CE and RoHS |
Advantages:
220V high voltage led strip is an "updated version" of the low voltage strip.The use of DC 12V led strip has to be with a miniwatt adapter,and its best length is 5 meters.For the projects,this is very inconvenient. Now,our high voltage strip could solve all the problems.100 meters in one line without connection,and no signal amplifier needed. Cost-saving on power supply and installation,easy to transport and install.
Features:
1. Can be run in 220V or 110V without extra adaptor or power source.
2. Can be max run 100 meter and also be cut or connected in every meter.
3. PVC tube provides good waterproof and can be used both indoor & outdoor.
4. 3528 & 5050 LED provide greater brightness compared to 3mm LED used in rope light.
5. Solid-state for high vibration resistance and good flexibility for any shape.
6. Independent LED, one led broken will not affect next leds (3538 double row and 5050).
Installation Diagram:
1.Install:Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.
2.Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.
3.Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
Application:
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
Advantage of Flexible High Voltage SMD LED Strips.
1.Chip:
All the chips BET adopt is from Taiwan Epistar brand with 18-20LM, with uniform light and low light decay with high quality and long life span, Two years Guarantee,CE&ROHS approved.
2. PVC
BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet,
While most of the other normal strips only adopt muddy plastic material, this makes strips not so bright and will be easily turn yellow after short time using.
3.Technology:
The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted.
This will be not so easy to fall off with the mounting when make installing.
4.Copper Wire:
BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light. While the common one only use the iron wire with low material cost and poor conduction.
5.PCB
The PCB width we adopt is with 8MM,While others is only with 5MM,
wider PCB is better for heat dissipation and protect the LEDS.
6.Craft
BET adopt advanced machine and technology for every process,
you can see our BET’s PCB inside is flat while other’s is curly.
About us:
1. Your inquiry related to our products or prices will be replied in 24 hours .
2. Professional led manufacturer both on led component and application product .
3. Professional support on technology and distribute direction .
4. Well-trained and experienced staffs to answer all your enquires in fluent English .
5. Distributorship are offered for your unique design and our current models .
6. Protection of your sales area,ideas of design and all your private information .
7. All the products must through 10 hours aging before delivery to ensure the quality .
8. 4 assembly lines, capacity of 500000pcs led lights in a month .
9. Unique appearance design and ideal recommended services are offered .
10. OEM&ODM are welcome , any your customized lightings we can help you to design and put into product .
11. On time delivery and prompt response to your enquiry .
12. Satisfied after-sales service,welcome all requires and we will reply promptly .
Packaging & Delivery
Package:
1 x Brown Carton
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: The problem of residual light in LED lamp after power failure
- The power line can be switched to zero. The main switch is off and caused by a zero line.
- Q: How to install the car LED lamp belt?
- Each LED lamp belt must be equipped with a special plug (plug with transformer); when connected, it is necessary to remove the bright plastic cover, then connect the test lamp and then cover it. Cannot cut directly with the lid join, such short circuit is easy!
- Q: Why can't the LED light band be broken from the fracture, but it can be light from the middle?
- From your point of view, the whole bunch of LED should be connected in parallel, and the lines are all connected.The reason why the port is not bright: most likely the following is broken under the port pad.
- Q: How do you cut the LED light belt?
- When electrons and holes are combined, they can radiate visible light, so they can be used to make light-emitting diodes. In circuits and instruments, as an indicator, or in combination with text or digital display. GaAs diodes glow diode gap, green silicon carbide, yellow light diode, light emitting diode gan. Because of the chemical properties and organic light-emitting diode OLED and inorganic light-emitting diode LED.
- Q: How to solve the problem of LED lamp heating problem?
- Specifically, the heat generated by the LED chip comes out of its metal heat sink, first through the solder to the aluminum substrate PCB, and then through the heat conductive glue to the aluminum radiator. Therefore, the LED hotel engineering lamp heat dissipation actually includes the heat conduction and the heat dissipation two parts. However, the size of LED lamp cooling according to power and place, also have different choices.
- Q: Which kind of LED lamp is better?
- See attachment. LED lamp with formal will attach instructions and specifications in the lights inside the boxes, also equipped with LED lights with a connector or card holder; not the accessories and LED lamp with copycat version of the box, because some manufacturers still can be saved.
- Q: How do you control the two LED lights with a remote control?
- A controller using light and white light RGB can not only remote controller is used to control the RGB is also the color of colorful light, white light is remote control of current and voltage to control the light, and the light is 4 RGB with the line, white is the 2 with the two, not mixed together with a controller!!
- Q: Where is the difference between the LED lamp belt and the ordinary lamp?
- Electrical characteristics LED soft light belt power supply and incandescent lamp, fluorescent lamp is very different. The incandescent lamp can be directly connected to the alternating current of the 220V. Although there are ballasts and switches for fluorescent lamps, they also use 220V alternating current. The LED power supply requires a constant DC current, so the AC 220V is converted to dc. The efficiency of the power supply is not high, will directly affect the efficiency of the entire lighting, so improving the efficiency of the power supply is very important for improving the efficiency of the LED soft light band lighting.
- Q: According to the LED lights, how to judge the quality of the products?
- Look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.
- Q: How many volts does the LED light belt need to start?
- General LED lamp belt is 12V, 3 beads and a resistor in series, a lamp minimum starting voltage of about 3V, almost 3 9V, although it is lit up, but the brightness is very low, want to achieve higher brightness or to 12V, then 9-12V lamp belt between the lights. Of course, some factories also have 24V, and the same principle.
Send your message to us
Factory Newest No Need Power Supply 110V/220V 60Leds/M Flexible Led Strip Light Strip Led Strip 5050
- Ref Price:
-
$0.52 - 2.06
/ m
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Meters m
- Supply Capability:
- 1,000,000 Meters Per Month m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
