Electrodeless Induction Lamp 135 Watt with High-Frequency
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Sets pc
- Supply Capability:
- 10000 Sets per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
135W High-Frequency Electrodeless Induction Lamp
1. Green and environmental -protection.
2. Excellent color rendering
High-efficiency and energy-saving
The lighting efficiency of the system reaches up to 110 lm /w.And the power factor reaches up to 99%.The energy consumption of idle work is reduced.It saves above 90% energy when compared with incandescent lamp and saves above 50% energy when compared with high pressure mercury lamp and high pressure sodium lamp.
Green and environmental –protection
Solid amalgam and lead free glass are adopted .Above 99% materials can be recycled.which meets the international requirement of environmental protection.
Excellent color rendering
The color rendering index is large than 80.And the light color is mild,which can present the natural color of objects.
Optional color temperature
The color temperature ranges from 2700K-6500k.And there are also many patterns of colorful light bulb.
Have no strobe
It works in 2.65Mhz high frequency ,which will not produce harm of stroboscopic effect .
Little light evanescence
The luminous flux maintenance factor of 2000 hours is 95%.The luminous flux maintenance factor of 20000 hours is 80%.The luminous flux maintenance factor of 60000 hours of 75%.
Ultra-long service life
The aging of lamp filament and electrode sputter are the main reason in limiting the service life tional light source .The Electrodeless lamp has no lamp filament and electrode inside and frequency electromagnetic induction coupling way to excite to shine.The working life is above 60000 hours.
Instant –on and restart
It is instant lighted.And the switching number reaches up to 200000.
Large range of working temperature
The amalgam technology is adopted and it needs no further warm-up.It can start-up and work normally in the temperature ranging from -40 to -55.
Good performance of shake-proof and explosion-proof
The shake resistance performance is excellent and the lighting spot can be any place because there is no lamp filament and electrode in the ligh bulb.Moreover ,the surface temperature is very low when it is lighted,which is suitable for the place
- Q:Is the energy-saving lamp a fluorescent lamp?
- Yes, the energy saving lamp is called compact fluorescent lamp. I hope it will be a happy holiday!
- Q:Are there any differences between fluorescent lamps and energy-saving lamps? What are the differences between them?
- Material luminescence can be divided into two categories: one is the material heating, thermal radiation and the light, the other is the object of excited energy absorption and the transition to the excited state (non steady state) in reverse to the ground state in the process of releasing energy in the form of light. The luminescent materials with rare earth compounds as matrix and rare earth elements as activators are mostly in the latter category, namely rare earth phosphors. Rare earth elements are rich in electronic energy levels, because 4f orbitals exist in the electronic configurations of rare earth atoms, which create conditions for a variety of energy levels to achieve a wide range of luminescence properties.
- Q:Why can fluorescent lamps emit various colors?
- The fluorescent lamp uses this principle. The fluorescent lamp itself sends out ultraviolet light, and the fluorescent powder coated on the tube wall absorbs ultraviolet lightAfter the line is changed into visible light, the phosphor is different and the color of the light is also different
- Q:How to adjust light in fluorescent lamp
- Tolerable。 Dimming is mainly the frequency modulation, generally from 10-100%, but must take into account the small power when the filament emitting insufficient electronic problems. Electronic dimming ballast for fluorescent lamp is a molded product. ORSAM has.LUTRON fluorescent lamp, dimming module and dimming ballast are easy to use.
- Q:Maintenance and repair of fluorescent lamp
- Don't switch the lights too often. Too much lighting can cause premature darkening of both ends of the tube, which affects the power output of the tube, and it should be noted that the lights should be switched on for 5 to 15 minutes after the lights are turned off.
- Q:What's the difference between an energy-saving fluorescent lamp and a LED light?
- Different lighting principleAn energy-saving fluorescent lamp uses mercury vapor at low pressure to release ultraviolet light after energizing so as to make fluorescent powder coated on the inner wall of the lamp tube shine.The light emitting element of the LED is a semiconductor crystal,
- Q:What are the types of fluorescent lamps?
- Relationship between the diameter of fluorescent lamp tube and its electrical parameters:1, fluorescent tube, the smaller the diameter, the higher the light efficiency, the better power-saving effect2. The smaller the diameter of the fluorescent tube, the higher the ignition voltage of the glow lamp, the higher the technical performance requirements of the ballastThe diameter is larger than T8 (T8) fluorescent lamp starter ignition voltage is low. Compared with 220V, 50Hz AC, with starting ignition voltage less than 1/2 power supply voltage law. Can use inductive ballast, for starting and lighting operation.
- Q:What is a fluorescent lamp? What are fluorescent lights?
- The fluorescent tube is a glass tube, the inner wall is coated with a layer of fluorescent powder (magnesium tungstate, calcium tungstate, zinc silicate, etc.), different phosphors can emit light of different colors. The lamp tube is filled with thin inert gas (such as argon gas) and mercury vapor, and both ends of the lamp tube have a filament made of tungsten, and the filament is coated with an oxide which is easy to emit electrons after being heated. When the filament passes through the current, the filament in the lamp tube emits electrons, and the temperature in the tube is increased, and the mercury is evaporated. Along with the gradual rise in temperature in the tube, mercury vapor free, inert gas molecular collision when mercury vapor discharge, arc discharge, it radiates invisible ultraviolet light, visible light fluorescent powder in the inner wall of the tube after UV excitation.
1. Manufacturer Overview |
|
---|---|
Location | Guangdong,China (Mainland) |
Year Established | 2006 |
Annual Output Value | |
Main Markets | North America Australia East Europe Hong Kong Taiwan Japan & Korea West Europe Mainland China |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shenzhen |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Electrodeless Induction Lamp 135 Watt with High-Frequency
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Sets pc
- Supply Capability:
- 10000 Sets per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products