2. All dimension tolerance is ±1mm unless otherwise noted.
3. Tolerance of measurement of luminous intensity±15%.
4. All the technical parameters are based on per roll
Electrical / Optical Characteristics at TA=25°C
Customize your strip light by picture or by technical datas.
Packing & Delivery
plastic bag intside, cartons outside
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
3-10 business days
30-40 business days
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
Send a message to us:
Q:How to solve the problem of LED lamp out of light effect?
When the lamp band is too long, the brightness of the tail of the lamp belt is not enough1) use a more powerful constant voltage drive. Unlike 3A appliances, you can drive 3528 soft lights with 6 meters, but in order to prevent the tail of the light belt brightness is not enough, you can use 4A appliances, to ensure that the appliance has sufficient margin. But the power of the appliance doesn't need to be higher, otherwise it will waste.2) change the way the lights are connected. 6 meters of 3528, you can use 5 meters +1 meters in parallel with the lights, you can also 3 meters +3 meters combination of parallel.
Q:Which is good for low voltage lamp belts 5050 and 3014?
Choosing 5050 or 3014 does not have much effect on the bandThe quality of the light belt is judged mainly by the chip, plate, brightness, heat dissipation and service life.
Q:5050 per meter, 60 beads, led band power consumption is about how much watts?
Power consumption (w / M): 11.52-10.55Luminous color: whiteLamp socket interface (lamp holder model): T tubeApplicable voltage: 220VSpecification (lamp / meters): 60Band style: Patch
Q:Troubleshooting of LED light belt
Mainly from the following aspects to identify:1, look at solder joints. Regular LED lamp manufacturers with LED light band produced by SMT patch process, produced by solder paste and reflow soldering. Therefore, the solder joint on the LED light band is smoother and the solder flux is not much, and the solder joint is in an arc shape extending from the FPC pad to the LED electrode.2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.3. Look at the cleanliness of the surface of the LED lamp. LED band produced by SMT process, its surface cleanness is very good, can not see what impurities and stains. Hand soldering process to produce a cottage version of the LED lamp band, no matter how the surface cleaning, will remain stains and traces of cleaning.4. Look at the packing. The regular LED lamp belt will be packed with an antistatic coil tray, 5 meters roll or 10 meters roll, and the outer packing will be sealed with anti-static moisture proof packing bag. LED version of the cottage version of the band with recycled reel, there is no anti-static moisture-proof package, a closer look at the reel, you can see the appearance of cleaning labels left traces and scratches.5. Look at the label. Regular LED lights, bags and rolls have printed labels, not printed labels.6, look at the attachment. LED lamp with formal will attach instructions and specifications in the lights inside the boxes, also equipped with LED lights with a connector or card holder; not the accessories and LED lamp with copycat version of the box, because some manufacturers still can be saved.
Q:Embedded LED lights with notches generally go deep enough
It depends on what kind of band you buy3528505057303014 single row double row light bandThe width is usually 8101216 width
Hello, this is the zero line fire. It's OK to change the zero line to the fire line. Do not connect the LED light to the ground wire. It is below 36V and can be connected without grounding.
Q:Why does the LED light belt come with an interface of two meters?
It depends on the design of the line. Different lines will have different results.
Q:How does the LED light belt power supply?
LED lamp band connectionA1 diagram: connector for soft light strip connection power supply.A2 diagram: open a latch on one side of the product and fold the lid up.A3 diagram: when the lid is opened, insert one end of the soft light band into the connector, then fold the cover back and lock it.A4 diagram: complete connection.
Q:How do I choose the light belt?
LED flat is defined according to their shape, usually only the second light is circular, three line four line five line is flat, suitable for outdoor places round, flat is more suitable for indoor lighting.
Q:Does the LED light band save energy?
LED lights must be more energy efficient than traditional ones, and the brightness is high