3/8 Okoume/Bintangor/Poplar Face Commercial Plywood for Furniture and Packing
- Ref Price:
-
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.face/back:bintangor/okoume/pencil cedar and other hardwood
2. poplar or hardwood or finger joint as core
3.1220x2440x5-18mm
3.grade:BB/CC
4.glue:MR/E2
Commercial Plywood
core | poplar,hardwood,combi,eucalyptus,etc |
face/back | okoume,bintangor,pencil cedar,etc |
grade | bbcc grade |
glue | MR, E2, |
moisture | 12-16% |
thickness | 5-18mm |
tolerance | ≤6mm:0.3mm; ≥6mm:0.5mm |
pressed | two time hot press |
size | 1220*2440/ 1220*1830/ 910*1830/ 910*2130 |
usage | furniture/wooden pallets,plywood boxes,etc |
packing | pallet packing |
payment | T/T,L/C at sight |
delivery time | within 15 days after receiving deposit |
FAQ:
1. samples are available
2. discount is allowed for big orders
3. welcome to our factory for a visit at anytime
FEATURES:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
5.No ratten or decay
6.Low formaldehyde emission
7.The productions are suitable for the construction of viaduct and tall frame building
8.If put in boiling water for 48 hours,it still glue sticking and still formed
9.If used abide by illustration strictly,it can be reuse more than 50 times
10.Solve the problem of leaking and rough surface during construction process
- Q: triple? Nail gun Self-tapping screws? Cork Or other?
- The number of layers is generally odd, and few are even. Vertical and horizontal direction of the physical and mechanical properties of small differences
- Q: How to use building plywood?
- in the decoration works mainly used in ceilings, wall skirts, floor linings and so on.
- Q: Plywood is a common material for furniture?
- Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood
- Q: Wood board, plywood, MDF What is the difference
- Blockboard thickness specifications for the 16,19,22,25 mm quality grade is divided into one, two, three three levels
- Q: What are the key points for plywood selection?
- if you do not consider the panel pattern and color, should also be based on the environment and reasonable cost Selection of plywood grade, category
- Q: Ordinary plywood is divided into four categories
- According to different density, divided into 80, 70, 60 three categories. Quality level for the premium, one, two three
- Q: Plywood in the decoration works how to use
- Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood.
- Q: What is a joinery board?
- Blockboard thickness specifications for the 16,19,22,25 mm quality grade is divided into one, two, three three levels
- Q: Class III resistant tide plywood class IV tonic resistant plywood
- Mild wood veneer: with Ash, willow wood, color wood, birch and other peeling into 0.1-0.5mm thick sheet, plywood as a substrate made of glued, its beautiful pattern, good decorative
- Q: Plywood in the processing of defects
- Separation delamination The separation of two adjacent veneers due to lack of glue or poor glue.
Send your message to us
3/8 Okoume/Bintangor/Poplar Face Commercial Plywood for Furniture and Packing
- Ref Price:
-
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 10000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
