YD-PL600E Non-stop JRT/Industrial Roll Rewinding Line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
This line is the newest model which is upgraded on base of our quondam automatic re-winder and foreign technology.
A lot of advanced control technology are used in this line,such as: Program Logic Control System;HMI,;one button chinese-english switch;synchronous frequency conversion drive;integration of mechanics,electrics and photo.It is equipped with whole trouble information.It can detect and adjust every action of the rewinder automatically to keep the rewinder in optimal situation.For example:There is a web tension system in the line,It can control speed according to the tension of web so it can adapt different type of jumbo roll.So it is the best choice to produce top-grade bathroom tissue and kitchen towel for paper company. The characteristics of the rewinder are as follows:
1、Unwind is equipped with closed loop frequency conversion control system.
2、When the webs do not align,you can operate on the touch button screen to move the jumbo roll till webs align.
3、When the core unit can not detect core or core will use up, the machine will alarm to tell operator or workers to put some cores on the core bracket.
4、When the machine is running, web break off suddenly for reason of speed change sharply of problem from jumbo roll.
5、Degree of tightness can be adjusted while a log is rewinding.It can produce different degree of tightness in one log.
6、When a log is rewinding,the next core is ready.
7、For the reason of using advanced technology:Program Logic Control System; synch-ronous frequency conversion drive;integration of mechanics,electrics and photo.
8、When the finished log come to tail sealer, trimming, glue spraying and sealing can be finished at the same time.
9、embossing unit and glue applicator、edge embossing unit、printing system is order by customer.
Model | 2900(Other size to be specified) |
Jumbo roll width | 2850mm(Other size to be specified) |
Jumbo roll diameter | ≤Ø2000(Other size to be specified) |
Jumbo roll core size | Ø76mm,haftless type(To order) |
Finish log diameter | Ø90~Ø135mm |
Finish log core diameter | Ø38~Ø50mm |
Perforation pitch | 90~160mm(Other size to be specified) |
Perforation | 6 Pcs sprial upper Perforation knife,imporve the durability |
Rewind type | Non stop |
parameter set | HMI |
Coreless rewind | Vacuum suction(patent protection) |
Rewind alternation | Core insert(patent protection) |
Rewind system | With core and coreless integrated |
Control system | PLC,inverter,Optical-electro-mechanical integration |
Tenstion Control | Encoder,PLC,transducer |
Transmission | Gear,Timing belt,Flat belt |
Machine speed | 600m/min |
Alternation speed | 30 logs/min |
Backstand | 1-3 Ply(To be confirm by client),independent drive |
Power | AC380V 50HZ motor and servo motor |
Pneumatic system | 0.5-0.8Mpa(Provide by client) |
T30 Tail Sealer | Patent protection |
Gluing system | Reciprocating type spray nozzle sealing,double channel |
Model | 2900 |
Log Length | 2850mm |
Log diameter | Ø90~Ø135mm |
Effective log Qty | 300pcs |
Speed | 20 logs/min |
Power | 3KW |
Log Length | 1500mm-2700mm |
Log feed | Servo control feeding system |
Speed | 160cuts/min,4 rolls/cut |
Feeding channle | 4 channle |
grinding system | Pneumatic grinding,parameter can be set on control panel |
Circular knife outside diameter | Ø610mm |
Cutting tolerance | ±1mm |
Log size | ¢90~135mm |
Dust suction system | Remove the tissue and grinding dust |
Control system | PLC |
Installation power | Main Motor 15KW |
OPTION: | |
Embossing unit | Steel to rubber、point to point/nested/DECO embossing lamination system |
Edge embossing unit | steel to steel |
- Q:What are the main plastic forming processes?
- 3. cold pressing molding. Cold pressing molding is also called cold pressing sintering molding. The difference between the cold press molding and the ordinary compression molding is that the material is pressurized and molded at room temperature. The mold after release can be heated or cured by chemical action. This method is used in the forming of polytetrafluoroethylene and some high temperature resistant plastics (such as polyimide, etc.). The general process is three steps of billet sintering cooling.4. transfer molding. Transfer molding is a molding process for thermosetting plastics. When molding, the mold is heated and softened in the heating chamber and then pressed into the mold cavity where it has been heated. According to the different types of transfer molding equipment form: trap type; the tank; the piston.The requirement of plastic molding for transfer molding is that the plastic should have a greater fluidity before reaching the curing temperature, and the curing rate must be faster at the curing temperature. Phenol, melamine, formaldehyde and epoxy resins can meet this requirement.Transfer molding has the following advantages: less waste edge products, can reduce the processing quantity; second molding with fine or brittle insert and perforation of the products, and can keep the insert and the hole position is correct; the product performance is uniform, accurate size, high quality; the mould wear small. The disadvantage is that the manufacturing cost is high compression mold die; the plastic loss; the fiber reinforced plastics for fiber orientation and anisotropy; and around the insert around the plastic, sometimes due to melting is not strong and make the products according to the strength reduction.
- Q:What are the packaging machines that use temperature control watches?
- Direct heating sealing machine, blister packing machine, plastic sealing machine, heating pot, oven, toaster and so on
- Q:What is the general packing cost of beer beverage packaging?
- Beer beverage hot shrink packaging generally use PE heat shrinkable film, packaging temperature is usually in accordance with the film material and thickness to set,
- Q:The role of packaging equipment in packaging equipment
- (4) it can reduce labor intensity and improve working conditionsThe labor intensity of manual packaging, such as volume, weight heavy manual packaging products, both the consumption of physical strength, and safety; and for small and light products, due to high frequency, easy to make the action monotonous, worker occupation disease.(5) labor protection for workersFor some serious impact on health products, such as serious dust, toxic products, irritating, radioactive products, manual packaging is a health hazard, and packaging machinery can be avoided, and can effectively protect the environment from being polluted.(6) it can reduce the packing cost and save the storage and transportation expensesFor loose products, such as cotton, tobacco, silk and hemp, the compression packing machine can reduce the volume and reduce the packing cost. At the same time, due to the reduction of large volume, in order to save storage capacity, reduce storage costs, is conducive to the transport.
- Q:What does the mechanical equipment include?
- Track roller type rail flat car track car battery car nailThese are, want to know more, you can go to the network building equipment to see there
- Q:What kind of reducer is commonly used in packaging machinery?
- There are many kinds of packing equipment, such as food packing, filling, quantitative packing, back channel packing and so on
- Q:Whether you can press paper plastic molding after PET
- Sure;Note cards must be coated with plastic oil;But to use the hot pressing machine there is to do bakelite mold. Our company specializing in the production of blister, in addition to help customers hot packaging, directly to the finished products to customers
- Q:What does that mean when the composite material is pressed and molded? What are pressing forming? What are the characteristics of press molding equipment? Its development
- Different conceptsCompression molding refers to hot forming: mainly for thermoplastic materials (sheet), the use of hot forming machine, Blister molding, I think it should also be considered as a branch of hot stamping, vacuum or high-pressure gas will be used to assist. Hot pressing sheet forming a relatively small depth, relatively simple structure, low precision products, such as packaging materials, plastic pallets, plates in the dishes and so on. There are also forming plate pressing molding (lamination)
- Q:Food packaging process is not standardized, there is no responsibility?! For example, after the production of candy, because there is no corresponding packaging equipment, the need for artificial packaging
- You can send me a picture of your product and the process, so that I can answer your question exactly. More than 70% of the candies on the market are now automatically packed.
- Q:What machine does the packing carton machine have?
- Do the carton machinery: corrugated production line / single machine, printing machine, polishing machine, laminating machine, mounting machine, die-cutting machine, book paste machine for package machinery: automatic sealing machine, automatic strapping machine
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
YD-PL600E Non-stop JRT/Industrial Roll Rewinding Line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords