Q:LED display power supply how to configure how many units with the plate is calculated.

I with 14 P10, power supply * (0.8-0.9) / each unit board power can be rounded down.

Q:Ask to tell, or what decoder, mkv format can only put one, the rest of the mkv can not put any meaning?

LED display is also flexible, you can achieve: with a TV screen overlay text information, panoramic, close-up, slow motion, effects and other effects of real-time editing and playback (need to configure another non-linear editing equipment) Window display different screen and text functions ? to meet the requirements of the use of theatrical performances ? graphic effects display function:

Q:What is the difference between an LED display and an LCD monitor?

Notebook LCD screen commonly used is TFT. TFT (Thin Film Transistor) refers to the thin film transistor, each of the liquid crystal pixels are integrated in the pixel behind the thin film transistor to drive, which can be high speed, high brightness, high contrast display screen information is the best One of the LCD color display devices is now the mainstream display device on laptops and desktops.

Q:LED electronic display and P have anything to do

For outdoor led display, from the near, the general use of P10 or P12, a little bit with the P16 or P20, and for indoor display, the general P4 ~ P6 can be, a little bit to use P7.62 or P10.

Q:Led display support what video format

It has real-time editing and playback of superimposed text information, panorama, close-up, slow motion, effects and other effects on TV screen (need to configure non-linear editing device separately). It has the function of simultaneously playing multiple windows to display different pictures and characters

Q:LED display more than the size of the area must be 380v

LED display itself only need low-voltage DC power supply, whether it is 380V or 220V need to go through the buck and rectifier, which is the screen does not matter. Whether it is to use 380V or 220V depends entirely on the load balance of the power grid considerations, which depends not only on the size of the display, but also on the local grid capacity. In general, LED is weak devices, even if the display area and then large, the total power is also less than where to go, so you can use 220V single-phase power supply, but the power supply cable cross-sectional area to be larger, but the power circuit Much simpler.

Q:Led display speed how to tune

All need to display the data are ready, the "send" button to send data, select the need to send the frame and set the starting address, the point can be sent

Q:LED display a board dark light how is it?

What is the board? P10 There are three reasons for that. 1, first check the power on the line to the board on the line whether the soup or not connected! (Change line), 2, check the board above the terminal. (That is, to the board of the black plastic wire, a screw fixed line) that is and the board with welding wire welding. There may be no welding good. You can remove the outside kit. (Next to a small screw, unscrew on the line) to get a welding torch from the welding. 3, the original board on the Weld it Need to return to the factory new. The You said the board made dark may also be because the outside of the package drums appear perspective reflection. LED normal viewing angle is 70-110 degrees, the hope of the answer can help you

Q:How to identify the quality of led display quality

Led display driver IC: the current development of led display driver is a bit crystal, Mingwei, and some domestic drive IC;

Q:Is the TV screen good for the LCD or the LCD?

Although the cost of CCFL is not high, it is about ten yuan, but the maintenance staff will certainly open a high price to help you ), The operating voltage is lower (LED in 2V ~ 4V can work, and CCFL tube needs nearly 1200V high voltage to start, so need to use a special inverter circuit to provide high voltage. Inverter circuit is easy to bad.