Q:Do you really think your tape is good?

Not necessarily. You should only buy the right one. It's not necessarily expensive.

Q:How do you use double-sided adhesive for cloth? What is its purpose? Must heating be applied to glue? Will there be residual glue after bonding? Please speak more detail.

Cloth can be directly adhered to the top with double-sided adhesive, without heating. Hot glue is called hot melt adhesive

Q:5 cm double sided glue. How many meters per roll?

Suggest to Taobao or Ali look for related manufacturers. Ask for specific information.

Q:Classification of base material of double sided adhesive tape

It is divided into solvent type adhesive tape (oily double adhesive), emulsion adhesive tape (water based double adhesive), hot-melt adhesive tape, rolling adhesive tape and reactive adhesive tape.

Q:Construction method of butyl adhesive tape

(4) tear off the insulating paper on the top of the Yongxing adhesive tape and press the metal plate on the upper layer of the interface into the jointOrderly extrusion joints, so that the joint bond firm, closed tight.(5) tighten the screws so as to bond the upper and lower bonding surfaces of the adhesive tape. (1) pre installed above the parapet gutter gutter, the cement surface clean, brushing and base treatment.(2) the primary treatment agent suspected solid after installation of the water board, to ensure that the installation is firm and closely combined with the wall.(3) the water board will wipe clean, paste on the joint water board and cement wall in Yongxing according to the order of a single sided aluminum foil tape, the bonding agent pressure;

Q:What is an engraving tape?

The tape is a tape of the moment, different from ordinary paper double-sided tape, mainly used for advertising engraving industry, electronic industry,

Q:How can I get the double glue glued to the door?

5, if these things are not available, you can apply white toothpaste on the double-sided adhesive, and then erase slowly with a clean damp cloth.6, if it is in the field or work place, you can choose to use hot water or cold water wet it, and then scraped (relatively slow)

Q:With scissors to cut the foam double-sided tape, the scissors left a foam glue, sticky extra strong, difficult to remove, what is the way to remove the residual foam on the scissors?

First, use wire ballTools / raw materials: steel wire balls (for washing dishes, washing dishes) and dishwashing detergent.Methods / steps:1. Bring out the scissors glued to the glue, dip the water into the wet scissors, and apply the detergent;2. Brush with steel wire brush;3, clean water on a clean.

Q:How to fill in the property when releasing adhesive tape?

First of all, to understand your kind of tape, that is, its use, and then define attributes. I hope I can help you!

Q:Will double face adhesive affect its stickiness in summer?

Check whether the edges of the double adhesive tape are adhered or not, and whether or not the bottom sheet is leaking of siliconDouble adhesive tape edge adhesion or some parts of the bottom sheet leakage of silicone oil, in the processing process will cause waste paper rupture, can not be normal production. Therefore, before processing, take a length of about 1 meters of self-adhesive materials, hand peeling, to see whether the edge or other parts of the smooth, uniform peeling of the parts. Usually, paper and paper edge bottom adhesion occurred in a roll coating adhesive material cutting volume, and generally occurs only in the outer layer of 7 meters to 10 meters, so the drum encountered double-sided tape cutting edge with adhesion, don't immediately assert that the whole roll of paper have this problem.Also note that stripping light weight tissues (such as 60g/m2 and 80g/m2 facial tissue) is more powerful than peeling off heavy paper, and the lighter the paper, the more tightly it feels. Because of this, sometimes, according to the customer's request to cut the shape of the customer's choice of double-sided tape, can not be completed at the regular processing speed.