Quick Details Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
|Name||Double Sided Transfer Mesh Tape DSM-3875 For Industry|
|Lead Time||30 days/20'|
|MinOrder||4 jumbo rolls (2448 m2)|
|Package||packed with corrugated board|
CONSTRUCTION Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
Release liner: yellow glassine
Adhesive: synthetic rubber
TYPICAL PHYSICAL PROPERTIES Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
Thickness (adhesive + liner): 0.1mm
Initial tack (to steel ball): 32 #
Temperature resistance: 60DC
Holding Power: 50 Hours
PACKING Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
Core I.D.: 3” (76mm+/-1)
Packaging：Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
Stability and Reactivity Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
Chemical Stability: Stable and non-reactivity
Conditions to Avoid: Away from high temperature
Incompatibility with various substances：specific materials／condition to avoid．
Hazardous Decomposition Products：Thermal decomposition will produce mainly C02，and slightly CO．
Hazardous Polymerization：Can not occur
Transport Information Of Double Sided Transfer Mesh Tape DSM-3875 For Industry:
Not a hazardous material for DOT shipping．
Packaging sign：According to the buyer
Packaging Category：No information found/According to the buyer．
Shipping Marks: According to the buyer
- Q:How to remove double adhesive on paper?
- Hello, believe that your idea is to ensure that the newspaper intact, can try to use the hair dryer blowing warm air will soften it, gently rub, stubborn blowing soft with baby powder sprinkled on top.
- Q:How can I get the double glue glued to the door?
- 1, with a hair dryer to the double-sided adhesive residual wall, a blow to the double-sided adhesive after heating, weak, can tear off lightly.2, when the wall is far from the power socket, if there is anhydrous alcohol, you can find cotton balls dipped in some anhydrous alcohol, to erase traces of double-sided adhesive.
- Q:Seeking special glue and double-sided adhesive, I made several times, I have died of heart
- More hot, more strong. The adhesive force can waterproof, but easy to dust. You can choose other solvent glue
- Q:How to clean the foam double-sided adhesive?
- 4, you can try a rubber. But in the beginning may feel more and more dirty, but rub a little longer, you will see the effect, this method is relatively tired, have perseverance.5, with blisters, put a little detergent, and then brush with an old toothbrush just fine.6, with a cloth with alcohol or Erguotou wipe.7, with a letter of sodium and water a wipe off, or can also use paint thinner.
- Q:How to separate water-based double-sided adhesive and oily double-sided adhesive?
- Double sided tape is made of paper or cloth, plastic film substrate, then the elastomer pressure-sensitive adhesive or resin adhesive coating made in the substrate of the roll type adhesive tape is composed of base material, adhesive, release paper (film) is composed of three parts
- Q:How is double faced adhesive made?
- According to the plastic can be divided into solvent adhesive tape (oily glue), emulsion adhesive tape (water-based glue), hot-melt adhesive tape, adhesive tape, rolling type reaction type adhesive tape
- Q:Which products use double-sided tape more?
- Some need strong adhesive force, such as advertisement, door industry, clothing printing, etc.. Some face to withstand high temperatures, such as electronic and electrical equipment industry, automotive industry. If you want to do it, you must understand your product performance.
- Q:How to remove the remnants of double-sided adhesive left?
- Very simple, buy a roll of transparent adhesive, adhesive tape will do, paste you have double-sided adhesive place, and then put it after tearing, repeated a few times you can stick it offThis is a very good method, very simple and practical, easy to save trouble. I used, good, support
- Q:Coating process of organic silicon high temperature double faced adhesive tape. The substrate is PI or PET film.
- My company has done this thing, remember it is not PET, PI is not sure.
- Q:How do I see the double - sided tape made of sol or with gum?
- Oil glue double-sided adhesive is generally used for embroidery, PC board, Ming board adhesion, die-cutting, stamping, leather, clothing, mobile phone accessories, film switches and other industries instead of adhesive, economical and effective for all kinds of bonding.
The products are widely recognized and used in countries from Asia, Middle East, North and South America to Europe and Australia. Guided by the company’s philosophy of highest quality, competitive pricing and strong services and customer supports.
1. Manufacturer Overview
|Annual Output Value
||US$ 0.5 Million
||20.00% North America
20.00% South America
10.00% Eastern Europe
10.00% Southeast Asia
10.00% Northern Europe
10.00% South Asia
10.00% Western Europe
5.00% Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||20% - 30%
|No.of Employees in Trade Department
||Above 4000 M2
|No. of Production Lines
||OEM Service Offered
|Product Price Range