Road Milling Machinery KFX2000
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Engine | model | Unit | BF8M1015CP |
molding method |
| water cold | |
numbers of tank |
| 8 | |
rated power | kw | 419 | |
rated speed | rpm | 2,100 | |
Milling Roller | blade distance | mm | 15 |
numbers of blade | piece | 168 | |
diameter of milling roller (with blade) | mm | 1070 | |
max. Elevation angle | º | 5 | |
milling width | mm | 2010 | |
max. Milling depth | mm | 320 | |
Delivery Machine | grade one belt width | mm | 800 |
grade two belt width | mm | 700 | |
loading height | m | 3-5 | |
Rotation angle | ° | ±40° | |
Track Device | front track | mm | 1,626×305×610 |
rear track | mm | 1,626×305×610 | |
Fuel Tank | L | 850 | |
Hydraulic Tank | L | 260 | |
Water Tank | L | 3000 | |
Weight | the whole weight | kg | 30850 |
load of front axle | kg | 15330 | |
load of rear axle | kg | 15520 | |
working weight (full loading) | kg | 34000 | |
Feature | milling working speed | m/min | 0-30 |
max. Walking speed | km/h | 5 | |
max. Grade ability | % | 80 | |
Ground Clearance | mm | 310 | |
Min. Turning radius | m | 2.5 | |
External Dimension | mm | 13000×2675×3400 | |
Axle Base | mm | 4500 | |
Front Wheel Base | mm | 1570 | |
Rear Wheel Base | mm | 1420 |
KFX2000 Road Milling Machine is used for asphalt road maintenance of construction machinery to city road, warehouse and packing area. It has not only for getting rid of broker road surface, but also for removing road ruts by heavy trucks ( especially for road thickness is less of 20mm).
- Q:What are the design of the truck crane?
- Upgraded design: upgrades of existing car cranes based on experience and technology development to improve performance, reduce manufacturing costs or reduce operating costs.
- Q:What is the principle of the arm boom of the boom-type truck crane?
- Sequential expansion and contraction using multi-stage cylinder or a number of single-stage cylinder, etc. directly with the cylinder to promote
- Q:Is the truck crane limited by the yellow mark?
- Car crane in the final analysis, or motor vehicles, subject to the yellow standard.
- Q:What does the meaning of the letter in the car crane (car crane)?
- The main arm length of 13 to 52 meters. Vice arm length 9.15 ~ 15.25 meters. The structure is reasonable. The car for construction sites, mines, factories and terminals and other places of lifting installation operations. Optional mechanical grab device,
- Q:What is the usefulness of the revolving center of the crane?
- On the train to turn, and get off can not turn, which conflict, the hydraulic pipe will be twisted winding, in order to avoid these, so there is a center of the body.
- Q:Why the car crane rotation angle can not be more than 45 degrees
- Can not put the car crane when the tank with it,
- Q:For hydraulic cranes, why adjust the legs must be carried out without load
- With the load will have the force in the leg on the cylinder, the pressure is relatively large, Xuzhou Maske machinery
- Q:How is the length of the main hoist's main winch and sub-winch wire rope calculated?
- When the lifting angle of the boom is maximum, the wire rope override (generally not the full magnification of the main hook) is specified according to the specifications of the crane, and the length of the main rope is the length of the main rope.
- Q:What is the relationship between the winch and the reel and the reel shaft?
- First, the reel is mounted on the upper drum holder, and then the spline shaft is inserted into the internal spline of the friction plate of the reducer (the picture is seen), and then the hoisting motor (the balance valve is installed) and
- Q:What are the characteristics of the development of truck cranes in China?
- With the rapid development of the national economy, the user on the use of car cranes more and more requirements, hoping to be a machine, has not only used in the handling of heavy objects, but to meet the use of different environments and types of work
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Road Milling Machinery KFX2000
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords